Functional properties of collagenous material from chicken feet

Collagenous material was obtained from chicken feet skins and tendons, defatted with ethylic ether and treated with 0.05 M and 0.6 M NaCl solutions. Part of the material was dried at 35 degrees C in a forced air convection oven and another was freeze-dried. The air dried material had 77.2 g/100 g of collagen and the freeze-dried material 76.7 g/100 g. Both dehydrated materials showed the same behaviour for gel formation and cold water holding capacity. The material air dried had higher emulsifying capacity than the freeze-dried one. The collagen of freeze-dried material had higher solubility in 0.5 M acetic acid and water at 70 degrees C than air dried material. Gel strength, emulsion stability and water holding capacity at 60 degrees C were higher for freeze-dried material. The results indicate the potential use of these materials as functional ingredients in meat products.     

Exploring the possibilities of using Brazilian subbituminous coals for blast furnace pulverized fuel injection

The current study investigates the combustion and blast furnace injection performance of three Brazilian subbituminous coals (Mina do Recreio) and their beneficiation products using laboratory scale combustion tests. The coals have relative high ash yields (up to 40 wt%) that were reduced stepwise to levels as low as 12 wt%, dry basis. The reduction of ash yields is paralleled by a significant decrease in sulphur and inertinite contents.The combustion tests were performed in a drop tube reactor operating at 1300 °C using two different atmospheres (2.5 and 5% O₂). The chars exhibited preferentially rounded shapes with thick walls and abundant secondary porosity for the 2.5% O₂ chars, whereas the 5% O₂ chars showed very thin walls as a consequence of extensive burnout. The intrinsic reactivities of both set of chars were similar. The differences in conversion between the two working atmospheres were 24-37% and roughly tend to increase with increasing mineral matter content. Conversions as high as 76-81% were reached operating under 5% O₂ indicating that the coals are easy to burn. The small differences in burnout among the coals and their beneficiation products cannot be clearly attributed neither to mineral matter or inertinite content. A rough inverse relationship was found between the intrinsic reactivity of the chars and the inertinite content of the parent coal indicating that the char material derived from inertinite was intrinsically less reactive than that derived from vitrinite. These differences were no longer relevant at high temperature.Blast furnace injection performance was studied through thermobalance experiments using CO₂ atmosphere and 1050 °C temperature. It is apparent that the beneficiation process has no effect on the reactivity of the coals from Recreio Mine. The only exception is the low ash coal-2-LabB (11.5 wt%), for which a higher reactivity is indicated. The reactivity tests show also that the coals have adequate properties to be used together with imported coal blends in pulverized coal injection in the blast furnace (PCI).     

Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

Study of the thermomechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work describes the preparation and characterization of composite materials obtained by the combination of natural rubber (NR) and carbon black (CB) in different percentages, aiming to improve their mechanical properties, processability, and electrical conductivity, aiming future applications as transducer in pressure sensors. The composites NR/CB were characterized through optical microscopy (OM), DC conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA), and stress–strain test. The electrical conductivity varied between 10^?9 and 10 S m^?1, depending on the percentage of CB in the composite. Furthermore, a linear (and reversible) dependence of the conductivity on the applied pressure between 0 and 1.6 MPa was observed for the sample with containing 80 wt % of NR and 20% of CB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Fuel gas from a wood waste carbonization reactor

The production of fuel gas from wood wastes in a full scale carbonization reactor of simple design was studied. The production of methane and the approach to equilibrium to the water-gas shift reaction were experimentally correlated with the operating conditions. The heating value of the gas produced is comparable to that of typical air blown coal and biomass gasifiers, and may be improved by pre-drying the solid feed and by operating the reactor at lower temperatures.     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.     

A Context-Aware Interaction Model for the Analysis of Users’ QoE in Mobile Environments

This article describes a novel approach to model the quality of experience (QoE) of users in mobile environments. The context-aware and ratings interaction model (CARIM) addresses the open questions of how to quantify user experiences from the analysis of interaction in mobile scenarios, and how to compare different QoE records to each other. A set of parameters are used to dynamically describe the interaction between the user and the system, the context in which it is performed and the perceived quality of users. CARIM structures these parameters into a uniform representation, supporting the dynamic analysis of interaction to determine QoE of users and enabling the comparison between different interaction records. Its run-time nature allows applications to make context- and QoE-based decisions in real time to adapt themselves, and thus provide a better experience to users. As a result, CARIM provides unified criteria for the inference and analysis of QoE in mobile scenarios. Its design and implementation can be integrated (and easily extended if needed) into many different development environments. An experiment with real users comparing two different interaction designs and validating user behavior hypotheses proved the effectiveness of applying CARIM for the assessment of QoE in mobile applications.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.     

On arginine-based polyurethane-blends specific to vascular prostheses

Polymer blends based on Tecoflex™ and an experimental aliphatic polyurethane (HMDI-PCL-arginine stands for 4,4 (metylene-biscyclohexyl) isocyanate - poly (ε caprolactone) diol, SPUUR stands for segmented poly(urea)urethanes using amino acid of L-Arginine as chain extender) were obtained by solvent casting, and further studied by fourier transform infrared (FTIR) and Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis, and X-ray diffraction (XRD). Their biological performances were assessed in terms of hemocompatibility and Human umbilical vein endothelial cell (HUVEC) cytotoxicity. Tensile properties of dumbbell specimens were compared to longitudinal and circumferential tensile properties of tubular vascular graft. FTIR showed that as the SPUUR content increased in the blend, absorptions at 2860 cm⁻¹ increased, carbonyl absorptions at 1724 cm⁻¹ broaden and the small peak at 2796 cm⁻¹, typical of Tecoflex™ disappeared. Raman spectroscopy showed that the low intensity carbonyl absorption at 1724 cm⁻¹ also increased with SPUUR content. DSC allowed detection of PCL soft segment melting (T_m = 50°C) in agreement with X-ray reflections at 21.3° and 23.6°, assigned to SPUUR. However, no improvements in thermal stability were detected by TGA by blending. The addition of SPUUR to Tecoflex™ improved hemocompatibility and HUVEC cytotoxicity. The vascular grafts performance showed that 40% SPUUR blends exhibited the highest force in the longitudinal test whereas 50% SPUUR blends showed the highest circumferential force. Pressure burst strength was higher than 1000 mmHg for all blends. Overall, these blends can be used for high caliber vascular grafts.     

Trans-10 18:1 in ruminant meats: A review

Trans (t) fatty acids (TFA) from partially hydrogenated vegetable oils (i.e., industrial trans) have been phased out of foods in many countries due to their promotion of cardiovascular disease. This leaves ruminant-derived foods as the main source of TFA. Unlike industrial TFA where catalytic hydrogenation yields a broad distribution of isomers, ruminant TFA are enzymatically derived and can result in enrichment of specific isomers. Comparisons between industrial and ruminant TFA have often exonerated ruminant TFA due to their lack or at times positive effects on health. At extremes, however, ruminant-sourced foods can have either high levels of t10- or t11-18:1, and when considering enriched sources, t10-18:1 has properties similar to industrial TFA, whereas t11-18:1 can be converted to an isomer of conjugated linoleic acid (cis(c)9,t11-conjugated linoleic acid), both of which have potential positive health effects. Increased t10-18:1 in meat-producing ruminants has not been associated with negative effects on live animal production or meat quality. As such, reducing t10-18:1 has not been of immediate concern to ruminant meat producers, as there have been no economic consequences for its enrichment; nevertheless at high levels, it can compromise the nutritional quality of beef and lamb. In anticipation that regulations regarding TFA may focus more on t10-18:1 in beef and lamb, the present review will cover its production, analysis, biological effects, strategies for manipulation, and regulatory policy.