Composite indicator for railway infrastructure management

Railway Engineering Science - The assessment and analysis of railway infrastructure capacity is an essential task in railway infrastructure management carried out to meet the required quality and...     

Pleurotusostreatus and Agaricus subrufescens: investigation of chemical composition and antioxidant properties of these mushrooms cultivated with different handmade and commercial supplements

In this study, the chemical composition, total phenolic content and antioxidant activity (DPPH, ORAC and FRAP assays) of A. subrufescens and P. ostreatus, cultivated with handmade and commercials supplements, were compared. Additionally, the compounds ergosterol, saccharopine, and hexitol were identified in A. subrufescens by HPLC-MS/MS. The antioxidant compound p-coumaric acid and dihexoses was found in both mushroom species. A. subrufescens presented higher total phenolic content (73.8 ± 0.6 mg GAE 100 g⁻¹) and antioxidant activity than P. ostreatus (16.6 ± 0.5 mg GAE 100 g⁻¹). The handmade supplement based on the waste of noble grains presented statistically similar phenolic content to the mushrooms cultivated with commercial ones Spawn Mate II SE (86.1 ± 1.4 and 92.9 ± 0.3 mg GAE 100 g⁻¹, respectively). Therefore, the results support the use of handmade supplements based on agro-wastes as a viable alternative to the use of high-cost commercial ones.     

Ball Milling of Amaranth Starch-Enriched Fraction. Changes on Particle Size,Starch Crystallinity,and Functionality as a Function of Milling Energy

Starch-enriched fractions of amaranth grain were obtained from planetary ball milling and subsequently studied for particle size reduction, hydration properties, and crystallinity loss. Wide-angle X-ray scattering (WAXS) was used to evaluate the crystalline of starch-enriched fractions, using an iterative smoothing algorithm to estimate amorphous background scattering. This methodology was then used to determine initial crystallinity and monitor crystallinity loss during this process. The attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) showed that ball-milling treatment significantly decreased (p?<?0.05) the intensity ratios of the bands at 1,039 and 1,014 cm^?1 corresponding to the crystalline/amorphous part of starch structure. Starch crystallinity degree decreased by ball milling due to starch amorphization during this process. An excellent correlation was found between crystallinity degree obtained by WAXS and ATR-FTIR data for the whole ball-milled-analyzed samples. The energy required for size reduction was satisfactorily explained using a generalized grinding equation. A decrease of span and median diameter (D ₅₀) indicated sample homogenization during ball milling. Water absorption index and water solubility increased with crystallinity loss during process. The flour produced at the higher milling energy (6.52 kJ/g), with a mean size of 68?±?1 μm, showed a low crystallinity degree (<5 %), and high water absorption and solubility indexes in comparison to the starch-enriched fraction sample. Particle activation provided by ball-milling process can offer chances for starch application such as sorbent agent in food or pharmaceutical industries.     

Thermo-Metallurgical Modeling of Nodular Cast Iron Cooling Process

A new numerical model to describe the microstructural evolution of a eutectic nodular cast iron during its cooling is presented. In particular, equiaxial solidification assuming an independent nucleation of austenite and graphite nodules is considered. In this context, the austenite has dendritic growth whereas the graphite grows with a spherical shape. After solidification occurs, the model assumes that the graphite nodules present in the cast iron continue growing since the carbon content in austenite decreases. Once the stable eutectoid temperature is reached, the alloy undergoes the austenite-ferrite transformation. The nucleation of the ferrite takes place at the contour of the spherical graphite nodules where austenite has low carbon concentration. A ferrite shell surrounding the graphite nodules is formed afterward by means of a process governed by carbon diffusion. Then, a ferrite-pearlite competitive transformation occurs when the temperature is below the metastable temperature. This thermo-metallurgical model is discretized and solved by means of the finite element method. The model allows the computation of cooling curves, fraction evolution for each component, and size and distribution of graphite nodules. The present numerical results are compared with experiments using standardized Quick-cup-type cups, and satisfactory numerical predictions of the final microstructure and cooling curves are achieved.     

Stability and mechanical evaluation of bovine pericardium cross-linked with polyurethane prepolymer in aqueous medium

The present study investigates the potential use of non-catalyzed water-soluble blocked polyurethane prepolymer (PUP) as a bifunctional cross-linker for collagenous scaffolds. The effect of concentration (5, 10, 15 and 20%), time (4, 6, 12 and 24 h), medium volume (50, 100, 200 and 300%) and pH (7.4, 8.2, 9 and 10) over stability, microstructure and tensile mechanical behavior of acellular pericardial matrix was studied. The cross-linking index increased up to 81% while the denaturation temperature increased up to 12 °C after PUP crosslinking. PUP-treated scaffold resisted the collagenase degradation (0.167 ± 0.14 mmol/g of liberated amine groups vs. 598 ± 60 mmol/g for non-cross-linked matrix). The collagen fiber network was coated with PUP while viscoelastic properties were altered after cross-linking. The treatment of the pericardial scaffold with PUP allows (i) different densities of cross-linking depending of the process parameters and (ii) tensile properties similar to glutaraldehyde method.     

Discovering collaborative knowledge-intensive processes through e-mail mining

Knowledge Management aims to promote the growth, communication and preservation of knowledge within an organization, which includes managing the appropriate resources to facilitate knowledge sharing and reuse. Business Process-Oriented Knowledge Management focuses on discovering and representing the dynamic conversion of existing knowledge among participants involved in executing business processes. In this context, Knowledge-Intensive Processes are a very important and challenging specific subclass of processes, since they strongly involve socialization and informal exchanges of knowledge among participants. This paper describes in detail a method for semi-automatic discovery of relevant information characterizing Knowledge-Intensive Processes, as well as the results of further evaluation of the method. Our approach draws on the informal exchange of existing knowledge in collaborative tools such as e-mails. The output is a conceptual map that describes the main elements of a Knowledge-Intensive Process, as well as their relationships. The results from the case study conducted to evaluate the method in an organization underlined the prospects for using collaborative environments to discover the way agents perform their activities.     

Determination of moisture diffusion coefficient in transformer paper using thermogravimetric analysis

This paper presents the methodology used and the results obtained in the determination of moisture diffusion coefficient of non-impregnated transformer insulating paper. In order to establish the diffusion coefficient, drying curves of paper samples were obtained by means of thermogravimetric experiments. The diffusion coefficient parameters were found by applying an optimization process based on genetic algorithms. The error function between measured and simulated curves was determined, and the parameters achieving the best correspondence between measured and estimated values were obtained. As a result, a new equation for the diffusion coefficient of non-impregnated insulating paper is proposed, depending on average moisture concentration, temperature and insulation thickness. The proposed coefficient was validated through experimental cases finding a good agreement between the experimental drying curves and those obtained by simulation using the diffusion coefficient. The proposed diffusion coefficient can be used for the determination of the time required to dry power transformers in factory.     

Ethylene production,respiration and gas exchange modelling in modified atmosphere packaging for banana fruits

A mathematical model was developed from experimental measurements to describe the evolution of the O₂, CO₂ and ethylene in a modified atmosphere packaging system for Cavendish bananas. The respiration and ethylene production in the fruits were experimentally obtained from a closed system method and then represented by Michaelis–Menten equations of enzyme kinetics. The gas transfer through the packaging was described by a Fick's diffusion equation, and the temperature dependence was represented based on the Arrhenius law. The model was validated by packaging the fruit in perforated bags of polypropylene and low density polyethylene at 12 °C for a period of 8 days. With the developed model it was possible to satisfactorily describe the experimental evolution of the gas content in the headspace of the packages, obtaining coefficients of determination (R²) of 0.93 for the O₂ levels, 0.90–0.91 for the CO₂ levels, and 0.89–0.93 for the ethylene levels.