Carbon nanotubes‐filled thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

This article reports the preparation and characterization of multiwalled carbon nanotubes (MWCNTs)‐filled thermoplastic polyurethane–urea (TPUU) and carboxylated acrylonitrile butadiene rubber (XNBR) blend nanocomposites. The dispersion of the MWCNTs was carried out using a laboratory two roll mill. Three different loadings, that is, 1, 3, and 5 wt % of the MWCNTs were used. The electron microscopy image analysis proves that the MWCNTs are evenly dispersed along the shear flow direction. Through incorporation of the nanotubes in the blend, the tensile modulus was increased from 9.90 ± 0.5 to 45.30 ± 0.3 MPa, and the tensile strength at break was increased from 25.4 ± 2.5 to 33.0 ± 1.5 MPa. The wide angle X‐ray scattering result showed that the TPUU:XNBR blends were arranged in layered structures. These structures are formed through chemical reactions of ? NH group from urethane and urea with the carboxylic group on XNBR. Furthermore, even at a very low loading, the high degree of nanotubes dispersion results in a significant increase in the electrical percolation threshold. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40341.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.     

Chemikalienfreie Bekämpfung von Holzschädlingen durch dielektrische Erwärmung mit Radiowellen und Mikrowellen

Thermal pest control requires long treatment times due to the low thermal conductivity of wood and may lead to the formation of cracks. Here, the thermal treatment with radio waves as well as microwaves has been studied. The direct dielectric heating has the advantage of a good homogeneity. The obtained temperature profiles for radio waves were more homogeneous compared to microwaves. Detailed studies showed that elimination of pests was not related to the application of the electromagnetic field itself, but due to the temperature increase.     

Achieving β-phase poly(vinylidene fluoride) from melt cooling: Effect of surface functionalized carbon nanotubes

Poly(vinylidene fluoride) (PVDF) based nanocomposites with different surface-functionalized multi-walled carbon nanotubes (MWCNTs) were prepared by melt mixing in a small scale compounder. With the incorporation of commercial functionalized MWCNTs, the β-phase in PVDF can be directly achieved from melt cooling, as verified by results of Fourier transform infrared spectrum and X-ray diffraction. Interestingly, nanocomposites with amino group functionalized MWCNTs showed the highest percentage of β-phase (17.4%) formation in PVDF, followed by those with hydroxyl groups (11.6%) and unmodified MWCNTs (9.4%). However, the nanocomposites containing MWCNTs with carboxyl groups which were thought to be able to well interact with the dipoles on PVDF chains have the lowest amount of β-phase, i.e. 4.7%. The analysis on the mechanism of the influence of surface functionalization of MWCNTs on the formation of β-phase in PVDF shows that the combined effects of the dispersion of MWCNTs and the nanotube–polymer interactions account for the formation of the β-phase in PVDF.     

Über die Reaktionen von Benzimidazol-2-carbonsäurehydrazid mit Elektrophilen

About the Reactions of Benzimidazole-2-carbohydrazide with Electrophilic Compounds Benzimidazole-2-carbohydrazide ( 1 ) reacts with aldehydes and ketones to form N-alkylidene-benzimidazole-2-carbohydrazides( 2a–j ). With carbon disulfide, diphenyl carbonate and cyanates, ring closure takes place to afford 1,2,4-triazines and 1,3,4-oxadiazoles. Attempts to synthezise 2-isocyanato-benzimidazole failed. ¹H-n.m.r. and ¹³C-n.m.r. spectroscopic data of the compounds are given.     

在机床研发中基于职能单位的产品开发理论与实践

通过调查得知,包括虚拟现实技术在机床制造中应用可能性的应用方法、策略和工具在产品开发中的现状.对调查结果进行了讨论,考虑到研究理论的可移植性和对企业内部实战的依赖性.讨论的结果为基础研究领域的命题"基于职能单位的产品开发"提供结论.     

Acylierung von Heterocyclen mit Kohlensäurederivaten. I. Kinetik und Mechanismus der Reaktion von 2-Aminobenzimidazolen mit Arylcyanaten

Acylation of Heterocycles with Carbonic Acid Derivatives. I. Kinetics and Mechanism of the Reaction of 2-Aminobenzimidazoles with Aryl Cyanates The second order rate constants for the reaction of 2-amino-benzimidazoles (2-ABI) with aryl cyanates forming 2-amino-benzimidazole aryl ester imide 3 have been determined in dependence on substituent effects by u. v. measurements. The results are interpreted by a six-membered cyclic transition state in which the electrophilic attack of the cyanate on the endocyclic N atom is catalyzed by an H bridge interaction of the exocyclic amino group of 2-ABI with the OCN group.