Impacts of impregnation with Timbercare Aqua on the red and yellow color tone of some woods and varnishes

This study has been performed for determining the effects of impregnation with Timbercare Aqua (Tc) on the red and yellow color tone of some woods and varnishes. For this purpose, the test samples prepared from Oriental beech, European oak, Scotch pine, Oriental spruce, and Uludag fir woods, which met the requirements of ASTM D 358, was impregnated with Tc according to ASTM D 1413 and producer's definition. After impregnation, wood surfaces have been coated by Sayerlack parquet varnish (Sp), Sayerlack interior varnish (Si), and Sayerlack exterior varnish (Se) varnishes in accordance with the ASTM D 3023 standards. According to ASTM D 2244, the red and yellow color tone of samples after varnishing process was determined. As a result, the value of red color tone was the highest in Oriental beech (15.21) and the lowest in Uludag fir (5.38). For the wood material, impregnation material, and varnish interaction, the red color tone value was the highest in Oriental beech + Tc + Sp (18.43) and the lowest in Uludag fir + Tc + Si (3.92). The value of the yellow color tone was the highest in pine (34.45) and the lowest in Oriental beech (26.50). For the wood material, impregnation material, and varnish interaction, the yellow color tone value was the highest in Oriental spruce + Tc + Sp (42.12) and the lowest in Oriental beech + Tc + Si (21.47). This effect may be due to the impacts of impregnation chemical on wood extractives and color pigments in varnish. Accordingly, it should be taken into care for applications where the red and yellow color tone value is important. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Vitamin A status of healthy children in Manisa,Turkey

Background  

Vitamin A deficiency is a major public health nutrition problem in the developing world. Even subclinical Vitamin A deficiency is associated with increased childhood mortality. Severe maternal vitamin A deficiency may cause increased mortality in the first months of life. There have been a limited number of studies regarding vitamin A status in Turkey. The aim of this study was to assess vitamin A status of healthy children in Manisa, Turkey.     

Halogen lamp–microwave combination baking of cookies

The effects of halogen lamp–microwave combination baking on the quality of cookies in terms of texture, color and spread ratio were studied. In addition, gelatinization and pasting properties of cookies baked in different ovens were assessed by using a Rapid Visco Analyzer. The hardness values of the cookies increased with increasing baking time and/or halogen power. The microwave power also contributed to cookie hardness. The lightness values of the cookies decreased, while the a* and E values increased linearly during baking at different halogen lamp and microwave powers. The spread ratio of conventionally baked cookies was significantly lower than that of the other cookies. Halogen lamp power, microwave power and baking time were found to have a significant effect on the spread ratio of the cookies. The moisture contents of the cookies decreased during baking as the halogen lamp and/or the microwave power level increased. The best baking condition in a halogen lamp–microwave combination oven to produce cookies having similar quality parameters as conventionally baked ones was baking at 70% halogen lamp and 20% microwave power levels for 5.5 min. The baking time of these cookies is half of that required in conventional baking.     

Presynchronization with Double-Ovsynch improves fertility at first postpartum artificial insemination in lactating dairy cows

The objective of this study was to compare circulating progesterone (P4) profiles and pregnancies per AI (P/AI) in lactating dairy cows bred by timed artificial insemination (TAI) following Ovsynch-56 after 2 different presynchronization protocols: Double-Ovsynch (DO) or Presynch-Ovsynch (PS). Our main hypothesis was that DO would increase fertility in primiparous cows, but not in multiparous cows. Within each herd (n = 3), lactating dairy cows (n = 1,687; 778 primiparous, 909 multiparous) were randomly assigned to DO [n = 837; GnRH-7d-PGF_2α-3d-GnRH-7d-Ovsynch-56 (GnRH-7d-PGF_2α-56h-GnRH-16hTAI)] or PS (n = 850; PGF_2α-14d-PGF_2α-12d-Ovsynch-56). In 1 herd, concentrations of P4 were determined at the first GnRH (GnRH1) of Ovsynch-56 and at d 11 after TAI (n = 739). In all herds, pregnancy was diagnosed by palpation per rectum at 39 d. In 1 herd, the incidence of late embryo loss was determined at 74 d, and data were available on P/AI at the subsequent second service. Presynchronization with DO reduced the percentage of animals with low P4 concentrations (<0.50 ng/mL) at GnRH1 of Ovsynch-56 (5.4 vs. 25.3%, DO vs. PS). A lesser percentage of both primiparous and multiparous cows treated with DO had low P4 concentrations at GnRH1 of Ovsynch-56 (3.3 vs. 19.7%, DO vs. PS primiparous; and 8.8 vs. 31.9%, DO vs. PS multiparous). Presynchronization with DO improved P/AI at the first postpartum service (46.3 vs. 38.2%, DO vs. PS). Statistically, a fertility improvement could be detected for primiparous cows treated with DO (52.5 vs. 42.3%, DO vs. PS, primiparous), but only a tendency could be detected in multiparous cows (40.3 vs. 34.3%, DO vs. PS, multiparous), consistent with our original hypothesis. Presynchronization treatment had no effect on the incidence of late embryo loss after first service (8.5 vs. 5.5%, DO vs. PS). A lower body condition score increased the percentage of cows with low P4 at GnRH1 of Ovsynch-56 and reduced fertility to the TAI. In addition, P4 concentration at d 11 after TAI was reduced by DO. The method of presynchronization at first service had no effect on P/AI at the subsequent second service (34.7 vs. 36.5%, DO vs. PS). Thus, presynchronization with DO induced cyclicity in most anovular cows and improved fertility compared with PS, suggesting that DO could be a useful reproductive management protocol for synchronizing first service in commercial dairy herds.     

Prediction of the pH and the temperature-dependent swelling behavior of -alginate hydrogels by artificial neural networks

This paper considers the possibility of using artificial neural network models to identify model for swelling behavior as new techniques. Multi-layer feed-forward, radial basis function and generalized regression neural network models were employed to predict the swelling behaviors of Ca²⁺-alginate hydrogels under different environmental conditions of pH and temperature. The results show that an excellent correlation between the experimental and predicted swelling ratios was obtained by the artificial neural networks. Generalized regression neural network has a better performance than the other neural network models. The absolute mean error, the determination coefficient and the standard error of prediction were used as performance criteria. In addition, the performances of the neural network models are significantly superior compared with those of second-order swelling kinetics, quadratic and cubic models of response surface methodology.     

Bond Strength of a Silicone Soft Lining Material to Poly(methyl methacrylate) Resin Treated with Maleic Anhydride and its Terpolymers

This study investigated the effectiveness of surface treatment of Poly (methyl methacrylate) (PMMA) denture base resin on tensile bond strength between PMMA/silicone-based soft liner. A total of 25 specimens were fabricated and assigned into five groups (n = 5). The surfaces of PMMA were treated with maleic anhydride, maleic anhydride-styrene-vinyl-acetate, n-butylmaleate-styrene-vinyl-acetate, or n-pentamaleate-styrene-vinyl-acetate prior to Primo adhesive primer application and silicone liner placement. The Primo adhesive primer on applied group untreated dentuse base resin served as control. The tensile test was performed using a universal testing machine. Fractured surfaces were observed under Scanning Electron Microscopy (SEM) and spectroscopic interpretation of the interfaces was done by Fourier Transform Infrared (FTIR). Test results showed that surface treatment increased interfacial strength giving the highest value for n-butylmaleate-styrene-vinyl acetate treated group. SEM micrographs revealed that the specimens with n-butylmaleate-styrene-vinyl-acetate and n-penta maleate-styrene-vinyl-acetate terpolymers underwent cohesive failure. FTIR analysis indicated secondary interactions such as hydrogen bonding, possibly on acrylic resin surfaces, caused by the use of maleic anhydride and its terpolymers, and the adhesive.