Sliding wear of austenitic and austenitic-ferritic stainless steels

The dry sliding behavior of a 304L austenitic stainless steel and a duplex 2205 austenitic-ferritic stainless was investigated. The evolution of wear was characterized by the existence of a sliding-distance transition. In particular, wear passed from delamination to tribo-oxidation, with a reduction in wear rate. The occurrence of such a transition was interpreted with reference to a theory of sliding wear based on the formation, by subsurface plastic deformation, of a tribological layer and its detachment during sliding. It has been found that the transition is controlled by the ability of the tribological system to form, on its outer part, a protective oxide-rich scale. This introduces a kinetic limitation, which is particularly important in the case of the duplex 2205, because of its lower ductility in comparison to the 304L steel. In this frame, the influence of sliding velocity, the particular frictional behavior, the role of chromium in the oxidative wear, and the surface temperature evolution during sliding could be explained.     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

Sharpening our axes [systems engineering application]

To improve a company's 'chopping' power it is necessary to apply systems engineering principles to 'project systems' and take the time to plan effectively, to reflect upon what it is that is being done and thereby improve the way things are done. This article takes a systems view of the project and applies systems engineering principles to project management. Projects (complex systems) are needed to create deliverables (which are also complex systems) and investing in the former will be more than paid back in the latter. It is our aim here to clear up some misunderstandings about systems engineering and its role within a complex project and to highlight the need for businesses to take time to improve their processes in the context of good systems engineering practice.     

The effect of large strains on ageing of a filled elastomer

Strain endurance experiments on a filled elastomer were performed at several temperatures. It was found that superimposed prestraining accelerated the ageing process. This process was caused by microstructural changes in the elastomer. In order to evaluate the mechanical properties of a filled elastomer it is necessary to take into consideration not only the ageing effects but also the loading history.     

Determining pheromone content of hairpencils from individual virgin males ofPseudaletia unipuncta (Haw.) (Lepidoptera: Noctuidae)

Levels of benzaldehyde recovered from virginPseudaletia unipuncta (Haw.) males were not influenced by (1) the time hairpencils remained in the solvent (1-72 hr), (2) anesthetization or agitation of males prior to excision of hairpencils, or (3) the time (photophase or scotophase) that hairpencils were excised. Thus the interindividual variability observed is not a methodological artifact. Most males had similar concentrations in both hairpencils, although in some cases only one hairpencil contained pheromone. In one case, a male with partially extruded hairpencils had no benzaldehyde at all. Neither pupal weight nor hairpencil length proved to be reliable indicators of pheromone content.Contribution No. 373, Département de biologie, Université Laval.     

Refractive index profiling-state of the art

Problems associated with different calibration techniques and some instrumental effects that can determine instrumental accuracy are discussed. It is shown how transmission effects can be observed and used to generate a correction curve for refracted near-field instruments. High-quality fiber slices needed for axial interferometry were used to obtain refractive index differences on suitable fibers to ±1% with the measurements traceable to national standards. Interferometry was used to calibrate a multiple-step fiber which is available in 10-m lengths with a certificate of calibration. The limitations of the technique are discussed, and preliminary results of a study on the effects of residual stress and stress relief on measurements are given. Comparisons are made between measurements made by axial interferometry and refracted near field on a range of fibers. It is shown that commercial profilers can produce reliable measurements of refractive index difference, absolute refractive index, profile shape, and numerical aperture that agree well with measurements by other techniques     

High-temperature electrical conductivity of aluminium nitride

The electrical conductivity of hot-pressed polycrystalline aluminium nitride doped with oxygen and beryllium was measured as a function of temperature from 800 to 1200° C and over a range of nitrogen partial pressure from 10² to 10⁵ Pa. The effect of beryllium dopant, the independence of conductivity from nitrogen partial pressure, and the observed activation energy suggested extrinsic electronic species or aluminium vacancies as charge carriers. Polarization measurements made with one electrode blocking to ionic species indicated that the aluminium nitride with oxygen impurity was an extrinsic electronic conductor.     

Lyapunov‐stable discrete‐time model reference adaptive control

Discrete‐time model reference adaptive control (MRAC) is considered with both least squares and projection algorithm parameter identification. For both cases complete Lyapunov proofs are given for stability and convergence. The results extend the approach of Johansson (Int. J. Control 1989; 50 (3):859–869) to include Lyapunov stability for MRAC when the normalized projection algorithm is used for parameter identification. Copyright © 2005 John Wiley & Sons, Ltd.     

Latest Developments in the Batchwise Application of Hot-dyeing Reactive Dyes to Cellulosic Knitwear

A dyeing profile for a range of reactive dyes suitable for application to cellulosic knitwear is defined. Such a profile shows good level-dyeing, reproducibility and fastness properties together with potential for simplified dyeing processes.     

Space and time bounds on indexing 3D models from 2D images

Model-based visual recognition systems often match groups of image features to groups of model features to form initial hypotheses, which are then verified. In order to accelerate recognition considerably, the model groups can be arranged in an index space (hashed) offline such that feasible matches are found by indexing into this space. For the case of 2D images and 3D models consisting of point features, bounds on the space required for indexing and on the speedup that such indexing can achieve are demonstrated. It is proved that, even in the absence of image error, each model must be represented by a 2D surface in the index space. This places an unexpected lower bound on the space required to implement indexing and proves that no quantity is invariant for all projections of a model into the image. Theoretical bounds on the speedup achieved by indexing in the presence of image error are also determined, and an implementation of indexing for measuring this speedup empirically is presented. It is found that indexing can produce only a minimal speedup on its own. However, when accompanied by a grouping operation, indexing can provide significant speedups that grow exponentially with the number of features in the groups