Highly Efficient Orange and Green Solid‐State Light‐Emitting Electrochemical Cells Based on Cationic IrIII Complexes with Enhanced Steric Hindrance

Highly efficient orange and green emission from single‐layered solid‐state light‐emitting electrochemical cells based on cationic transition‐metal complexes [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ (where ppy is 2‐phenylpyridine, dFppy is 2‐(2,4‐difluorophenyl)pyridine, and sb is 4,5‐diaza‐9,9′‐spirobifluorene) is reported. Photoluminescence measurements show highly retained quantum yields for [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂ sb]PF₆ in neat films (compared with quantum yields of these complexes dispersed in m‐bis(N‐carbazolyl)benzene films). The spiroconfigured sb ligands effectively enhance the steric hindrance of the complexes and reduce the self‐quenching effect. The devices that use single‐layered neat films of [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ achieve high peak external quantum efficiencies and power efficiencies of 7.1 % and 22.6 lm W^–1) at 2.5 V, and 7.1 % and 26.2 lm W^–1 at 2.8 V, respectively. These efficiencies are among the highest reported for solid‐state light‐emitting electrochemical cells, and indicate that cationic transition‐metal complexes containing ligands with good steric hindrance are excellent candidates for highly efficient solid‐state electrochemical cells.     

Mechanical Reinforcement of Polyethylene Using Polyethylene‐Grafted Multiwalled Carbon Nanotubes

The incorporation of carbon nanotubes to a polymer generally improves the stiffness and strength of the polymer, but the ductility and toughness of the polymer are compromised in most cases. Here we report the mechanical reinforcement of polyethylene (PE) using polyethylene‐grafted multiwalled carbon nanotubes (PE‐g‐MWNTs). The stiffness, strength, ductility and toughness of PE are all improved by the addition of PE‐g‐MWNTs. The grafting of PE onto MWNTs enables the well‐dispersion of nanotubes in the PE matrix and improves MWNT/PE interfacial adhesion. The grafting was achieved by a reactive blending process through melt blending of PE containing 0.85 wt % of maleic anhydride and amine‐functionalized MWNTs. The reaction between maleic anhydride and amine groups, as evidenced by X‐ray photoelectron spectroscopy and Raman spectroscopy, leads to the grafting of PE onto the nanotubes.     

Solution‐Processible Multi‐component Cyclometalated Iridium Phosphors for High‐Efficiency Orange‐Emitting OLEDs and Their Potential Use as White Light Sources

The synthesis and photophysical studies of several multifunctional phosphorescent iridium(III) cyclometalated complexes consisting of the hole‐transporting carbazole and fluorene‐based 2‐phenylpyridine moieties are reported. All of them are isolated as thermally and morphological stable amorphous solids. Extension of the π‐conjugation through incorporation of electron‐pushing carbazole units to the fluorene fragment leads to bathochromic shifts in the emission profile, increases the highest occupied molecular orbital levels and improves the charge balance in the resulting complexes because of the propensity of the carbazole unit to facilitate hole transport. These iridium‐based triplet emitters give a strong orange phosphorescence light at room temperature with relatively short lifetimes in the solution phase. The photo‐ and electroluminescence properties of these phosphorescent carbazolylfluorene‐functionalized metalated complexes have been studied in terms of the coordinating position of carbazole to the fluorene unit. Organic light‐emitting diodes (OLEDs) using these complexes as the solution‐processed emissive layers have been fabricated which show very high efficiencies even without the need for the typical hole‐transporting layer. These orange‐emitting devices can produce a maximum current efficiency of ～ 30 cd A^–1 corresponding to an external quantum efficiency of ～ 10 % ph/el (photons per electron) and a power efficiency of ～ 14 lm W^–1. The homoleptic iridium phosphors generally outperform the heteroleptic counterparts in device performance. The potential of exploiting these orange phosphor dyes in the realization of white OLEDs is also discussed.     

A location‐aware peer‐to‐peer overlay network

This work describes a novel location‐aware, self‐organizing, fault‐tolerant peer‐to‐peer (P2P) overlay network, referred to as Laptop. Network locality‐aware considerations are a very important metric for designing a P2P overlay network. Several network proximity schemes have been proposed to enhance the routing efficiency of existing DHT‐based overlay networks. However, these schemes have some drawbacks such as high overlay network and routing table maintenance overhead, or not being completely self‐organizing. As a result, they may result in poor scalability as the number of nodes in the system grows. Laptop constructs a location‐aware overlay network without pre‐determined landmarks and adopts a routing cache scheme to avoid maintaining the routing table periodically. In addition, Laptop significantly reduces the overlay maintenance overhead by making each node maintain only the connectivity between parent and itself. Mathematical analysis and simulations are conducted to evaluate the efficiency, scalability, and robustness of Laptop. Our mathematical analysis shows that the routing path length is bounded by log_d N, and the joining and leaving overhead is bounded by d log_d N, where N is the number of nodes in the system, and d is the maximum degree of each node on the overlay tree. Our simulation results show that the average latency stretch is 1.6 and the average routing path length is only about three in 10 000 Laptop nodes, and the maximum degree of a node is bounded by 32. Copyright © 2006 John Wiley & Sons, Ltd.     

A Novel and Efficient Feature Extraction Method for Iris Recognition

With a growing emphasis on human identification, iris recognition has recently received increasing attention. Iris recognition includes eye imaging, iris segmentation, verification, and so on. In this letter, we propose a novel and efficient iris recognition method which employs a cumulative‐sum‐based grey change analysis. Experimental results demonstrate that the proposed method can be used for human identification in efficient manner.     

A Temperature‐Controllable Microelectrode and Its Application to Protein Immobilization

This letter presents a smart integrated microfluidic device which can be applied to actively immobilize proteins on demand. The active component in the device is a temperature‐controllable microelectrode array with a smart polymer film, poly(N‐isopropylacrylamide) (PNIPAAm) which can be thermally switched between hydrophilic and hydrophobic states. It is integrated into a micro hot diaphragm having an integrated micro heater and temperature sensors on a 2‐micrometer‐thick silicon oxide/silicon nitride/silicon oxide (O/N/O) template. Only 36 mW is required to heat the large template area of 2 mm×16 mm to 40°C within 1 second. To relay the stimulus‐response activity to the microelectrode surface, the interface is modified with a smart polymer. For a model biomolecular affinity test, an anti‐6‐(2, 4‐dinitrophenyl) aminohexanoic acid (DNP) antibody protein immobilization on the microelectrodes is demonstrated by fluorescence patterns.     

A 60 GHz Medium Power Amplifier for Radio‐over‐Fiber System

We present the design and fabrication of a 60 GHz medium power amplifier monolithic microwave integrated circuit with excellent gain‐flatness for a 60 GHz radio‐over‐fiber system. The circuit has a 4‐stage structure using microstrip coupled lines instead of metal‐insulator‐metal capacitors for unconditional stability of the amplifier and yield enhancement. The gains of each stage of the amplifier are modified to provide broadband characteristics of input/output matching for the first and fourth stages and to achieve higher gains for the second and third stages to improve the gain‐flatness of the amplifier for wideband.     

Adding sense of spatial locality to routing protocols for mobile ad hoc networks

Recently, there has been an increasing interest in mobile ad hoc networks. In a mobile ad hoc network, each mobile node can freely move around and the network is dynamically constructed by collections of mobile nodes without using any existing network infrastructure. Compared to static networks, it faces many problems such as the inefficiency of routing algorithms. Also, the number of control packets in any routing algorithm increases as the mobile speed or the number of mobile nodes increases. Most of the current routing protocols in ad hoc networks broadcast the control packets to the entire network. Therefore, by reducing the number of control packets, the efficiency of the network routing will be improved. If we know where the destination is, we can beam our search toward that direction. However, without using global positioning systems, how can we do this? Define the range nodes as the 1‐hop or 2‐hop neighbors of the destination node. In this paper, we propose using the range nodes to direct our searches for the destination. It can be combined with the existing routing protocols to reduce the control overhead. We show through simulations that AODV and DSR combined with the range node method outperforms the original AODV and DSR routing protocols in terms of control packets overhead. We also show that the delay introduced in find range nodes is insignificant. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrogen‐Terminated Si Nanowires as Label‐Free Colorimetric Sensors in the Ultrasensitive and Highly Selective Detection of Fluoride Anions in Pure Water Phase

The detection of anions in pure water phase with colorimetric sensor is a long standing challenge. As one of the most important anions, F^– is associated with nerve gases and the refinement of uranium for nuclear weapons. However, limited by its anions nature, few of the reported colorimetric sensors can successfully applied to detect F^–1 in pure water phase. This work designs a colorimetric sensor for F^–1 pure water phase detection by taking the advantages of the strong specific binding between F and Si, as well as the color‐changing property of H‐terminated Si nanowires (SiNWs). The sensor demonstrates ultra‐sensitivity, high selectivity, and good stability. The results reveal particular interest for the development of new type aqueous phase anions sensors with SiNWs.     

Impact of Blend Morphology on Interface State Recombination in Bulk Heterojunction Organic Solar Cells

This work is a reinvestigation of the impact of blend morphology and thermal annealing on the electrical performance of regioregular‐P3HT:PC₆₀BM bulk heterojunction organic solar cells. The morphological, structural, and electrical properties of the blend are experimentally investigated with atomic force microscopy, X‐ray diffraction, and time‐of‐flight measurements. Current–voltage characteristics of photodiode devices are measured in the dark and under illumination. Finally, the existence of exponential electronic band tails due to gap states is experimentally confirmed by measuring the device spectral response in the subband gap regime. This method reveals the existence of a large density of gap states, which is partially and systematically reduced by thermal annealing. When the band tails are properly accounted for in the drift and diffusion simulations, experimentally measured charge transport characteristics, under both dark and illuminated conditions and as a function of annealing time, can be satisfactorily reproduced. This work further confirms the critical impact of tails states on the performance of solar cells.