N‐Methyl‐Substituted Fluorescent DAG–Indololactone Isomers Exhibit Dramatic Differences in Membrane Interactions and Biological Activity

N‐methyl‐substituted diacylglycerol–indololactones (DAG–indololactones) are newly synthesized effectors of protein kinase C (PKC) isoforms and exhibit substantial selectivity between RasGRP3 and PKCα. We present a comprehensive analysis of membrane interactions and biological activities of several DAG–indololactones. Translocation and binding activity assays underline significant variations between the PKC translocation characteristics affected by the ligands as compared to their binding activities. In parallel, the fluorescent properties of the ligands were employed for analysis of their membrane association profiles. Specifically, we found that a slight change in the linkage to the indole ring resulted in significant differences in membrane binding and association of the DAG–indololactones with lipid bilayers. Our analysis shows that seemingly small structural modifications of the hydrophobic regions of these biomimetic PKC effectors contribute to pronounced modulation of membrane interactions of the ligands.     

Synthesis and pro-apoptotic activity of novel glycyrrhetinic acid derivatives

Triterpenoids are used for medicinal purposes in many countries. Some, such as oleanolic and glycyrrhetinic acids, are known to be anti-inflammatory and anticarcinogenic. However, the biological activities of these naturally occurring molecules against their particular targets are weak, so the synthesis of new synthetic analogues with enhanced potency is needed. By combining modifications to both the A and C rings of 18βH-glycyrrhetinic acid, the novel synthetic derivative methyl 2-cyano-3,12-dioxo-18βH-olean-9(11),1(2)-dien-30-oate was obtained. This derivative displays high antiproliferative activity in cancer cells, including a cell line with a multidrug-resistance phenotype. It causes cell death by inducing the intrinsic caspase-dependent apoptotic pathway.     

Thermal properties,adhesive strength,and optical transparency of cyclolinear poly(aryloxycyclotriphosphazenes)

Four cyclolinear poly(aryloxycyclotriphosphazenes) derived from poly[4,4′‐(isopropoylidene)diphenoxytetrachlorocyclotriphosphazene] and poly[4,4′‐(hexafluoroisopropylidene)diphenoxytetrachlorocyclotriphosphazene] were synthesized from the reaction of hexachlorocyclotriphosphazene (HCP) with 4,4′‐(isopropylidene)diphenol (bisphenol A) or 4,4′‐(hexafluoroisopropylidene)diphenol (bisphenol AF) in molar ratio 1 : 1 via a one‐step condensation polymerization. Subsequent reaction of the resulted chlorine‐bound polymers with adequate amount of the sodium salts of 4‐methoxycarbonylphenoxide or 4‐propoxycarbonylphenoxide yielded the corresponding chlorine‐free polymers, [poly(tetra‐4‐methoxycarbonylphenoxy)‐4,4′‐(isopropoylidene)diphenoxy cyclotriphosphazene] (MBACP), [poly(tetra‐4‐propoxycarbonylphenoxy)‐4,4′‐(isopropoylidene)diphenoxycyclotriphosphazene] (PBACP), [poly(tetra‐4‐methoxycarbonylphenoxy)‐4,4′‐(hexafluoroisopropylidene)diphenoxycyclotriphosphazene] (MBAFCP), [poly(tetra‐4‐propoxycarbonylphenoxy)‐4,4′‐(hexafluoroisopropylidene)diphenoxycyclotriphosphazene] (PBAFCP), respectively. The chemical structures were characterized by Fourier transformer infrared, ¹H, and ¹³C‐NMR. Thermal properties of polymers were investigated using DSC and TGA analysis. The obtained polymers were thermoplastic, having moderate T_g values in the range of 26–78°C and good thermal stability up to 350°C in N₂ and O₂ gases. The thermal decomposition of the isopropylidene‐containing polymers is a one‐step process, while that of hexafluoroisopropylidene‐containing polymers is a two‐step process. However, presence of the latter group in the polymers backbone showed negligible effects on the thermo‐oxidative stability. The adhesive strength was measured by lap‐shear strength test on glass–glass bonded joint and found to be in the range of 1.78–2.62 MPa, this property may be attributed to the physical interactions between glass–glass interfaces and the polar‐pendant units present at the polymers backbone. The products showed high optical transparency when they applied between two glass surfaces, the adhesive layers were colorless, with the UV cut‐off wavelength of 300–302 nm, and the maximum transparency of about 90% was observed within the wavelengths range of 400–700 nm. Because of their properties, the cyclolinear poly(aryloxycyclotriphosphazenes) synthesized in this study are recommended as potential candidates for high thermally stable, transparent adhesives required in industrial applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐co‐HFP) hollow fiber membranes prepared from PVDF‐co‐HFP/PEG‐600Mw/DMAC solution for membrane distillation

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐co‐HFP) hollow fiber membranes were prepared by using the phase inversion method. The effect of polyethylene glycol (PEG‐600Mw) with different concentrations (i.e., 0, 5, 7, 10, 12, 15, 18, and 20 wt %) as a pore former on the preparation and characterization of PVDF‐co‐HFP hollow fibers was investigated. The hollow fiber membranes were characterized using scanning electron microscopy, atomic force microscopy, and porosity measurement. It was found that there is no significant effect of the PEG concentration on the dimensions of the hollow fibers, whereas the porosity of the hollow fibers increases with increase of PEG concentration. The cross‐sectional structure changed from a sponge‐like structure of the hollow fiber prepared from pure PVDF‐co‐HFP to a finger‐like structure with small sponge‐like layer in the middle of the cross section with increase of PEG concentration. A remarkable undescribed shape of the nodules with different sizes in the outer surfaces, which are denoted as “twisted rope nodules,” was observed. The mean surface roughness of the hollow fiber membranes decreased with an increase of PEG concentration in the polymer solution. The mean pore size of the hollow fibers gradually increased from 99.12 to 368.91 nm with increase of PEG concentration in polymer solution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Improving lactic acid melt polycondensation: The role of co‐catalyst

A study on lactic acid polycondensation under melt conditions was carried out and a preliminary assessment revealed tin powder as a very good catalyst for poly(lactic acid) (PLA) synthesis by melt polycondensation while confirming previous information on SnCl₂ good performance. However, these catalysts also promoted side reactions leading to racemization and yellowing of the final polymer. The use of p‐toluenesulphonic acid (p‐TSA) or triphenylphosphine (PPh₃) as co‐catalysts proved to be very effective hindering colour formation and allowing synthesizing PLA samples with enhanced properties. The addition of these compounds to neat tin powder increased the PLA optical purity, whereas their addition to SnCl₂ speeded up the polymerization. A significant increase in molecular weight, from 32,500 to 52,000 g mol^?1, was recorded, with the new catalytic system SnCl₂/PPh₃ showing catalytic activity comparable with the one reported in the literature for SnCl₂/p‐TSA. Several characterization techniques were used for assessing polymer samples: the molecular weights were determined by SEC, thermal behavior measured by DSC, and racemization extent calculated from specific rotation measurements. UV/vis spectroscopy was confirmed as a powerful technique for evaluating yellowing of final polymers. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Modeling of Field Effect Transistor Channel as a Nonlinear Transmission Line for Terahertz Detection

This paper revisits the theory of operation of field effect transistor in the extremely high frequency scale, where the analysis has gone beyond the conventional cutoff frequency of the transistor. In this range, which is typically the terahertz (THz) and sub-terahertz range, the transistor blocks the high frequency signal and generates a rectified signal related to the input high frequency signal. An analytical model is derived for the channel of the FET in the linear mode of operation in non-resonant THz detection conditions. A transmission line distributed circuit model is applied. This is, from the authors’ point of view, the suitable model for high frequency non-quasi static operation and the characteristic parameters of this model are derived from the differential equation governing the electron gas in the channel. A comparison is presented for the calculated photoresponse with previously published experimental one showing good agreement away from the threshold potential. Finally, the effects of coupling between the present model and the external input circuit have been taken into account including the loading effects of the antenna and a discussion is given for the effect on frequency selectivity of the FET.     

Catalytic performance of organically templated nano nickel incorporated-rice husk silica in hydroconversion of cyclohexene and dehydrogenation of ethanol

Rice husk silica (RHS) was extracted from local rice husk by acid digestion and burning at 650 °C. RHS-Ni catalyst was prepared by dissolving RHS in 1 N NaOH and titrating with 3 N HNO₃ containing 10 wt.% Ni²⁺. The organic modifiers, either p-amino benzoic acid (A) or p-phenylenediamine (PDA) were incorporated in 5 wt.% and reduced in H₂ flow. Investigation of the three catalysts, (RHS-Ni)_R350, (RHS-Ni–A)_R350 and (RHS-Ni–PDA)_R350, confirmed good dispersion of Ni nanoparticles; all catalysts were amorphous. The BET surface areas increased in the order: (RHS-Ni)_R350 < (RHS-Ni–A)_R350 < (RHS-Ni–PDA)_R350 with controlled pore sizes. The as-prepared catalysts were applied for both hydroconversion of cyclohexene with molecular H₂ and ethanol dehydrogenation, using a flow-type reactor, at different temperatures. The activity in cyclohexene hydroconversion and selectivity to cyclohexane depended upon the reaction temperature; at t < 150 °C, the increased hydrogenation activity was referred to the formed SiO₂–Ni–amine complex, pore regulation as a prime requirement for H₂ storage and homogeneous distribution of incorporated Ni nanoparticles. At t > 150 °C, the backward dehydrogenation pathway was more favored, due to unavailability of H₂; the process became structure-sensitive. In ethanol conversion, the prevailing dehydrogenation activity of organically modified catalyst samples was encouraged by improved homogeneous distribution of Ni nanoparticles and created micropre system.     

Bacteriological effects of functionalized cotton dressings

This study aims to achieve effects of improved hydrophilicity and microorganism inhibition, which are rarely simultaneously present in wound dressings. Cotton gauzes were modified using the grafting of a polymer-based β-cyclodextrin. After optimizing the grafting conditions, the untreated and modified cellulosic samples were principally characterized using FT-IR spectroscopy, TGA/DTA analysis, in vitro drug release, and wettability measurements. In light of desired characteristics of wound dressings, the effectiveness of procedures was evaluated. It was found that contact angles for cotton gauzes decreased after functionalization, which means that hydrophilicity was proven to become excellent. A successful Methylene Blue complexation was confirmed through measure of the dyebath exhaustion using UV-spectrophotometry. Then, during Methylen Blue release test, we reported an initial burst release of active ingredient over 7?h, followed by zero-order release. The treatment effect on antimicrobial activity was investigated by growth inhibition, which was proven against Staphylococcus aureus and Escherichia coli.     

Study of woven fabric shear behaviour

The paper presents the shear frame test with a new method of gripping the fabric sample to describe the shear behaviour of fabrics used in the garment industry under high shear strain conditions (maximum shear angles of 20°). This shear frame test was also used to compare between hysteresis curves given by the Kawabata evaluation system (KES) test, the bias extension test and the shear frame test for 10 woven fabrics. The linear viscoelastic theory was used to analyse the shear relaxation behaviour of the woven fabrics. In addition, in this study, the kernel function of the generalised Maxwell model has been used to describe the viscoelastic properties of the fabrics.     

Novel fire-retardant bagasse papers using talc/cyclodiphosphazane and nanocellulose as packaging materials

This paper aimed to modify the ignitability of the bagasse paper by using talc powder, 1,3-di-aniline-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, and nanocellulose crystal. The formation of cellulose nanocrystals (CNCs) was detected using transmission electron microscopy (TEM), X-ray diffraction (XRD). Thermal analysis as thermal gravimetric analysis (TGA) of the specimens recorded the improvement of the highest % of ash residue at 750 °C compared to the untreated one. The shape of the flame spread was studied. The ignition properties were studied for the untreated and treated specimens by limiting oxygen index (LOI) and flame chamber (UL/94), which recorded enhancing compared to the untreated specimen. This improvement was recorded either by measuring the mechanical properties (tensile strength, burst strength, elongation, and elasticity) of the specimens. The current article showed that the treated specimen was recorded the highest values compared to the untreated one in all physical, mechanical, and ignition properties, so these treatment paper sheets may be used as fire-retardant packaging materials.