Synthesis and Sintering of Bi2Ti4O11

The conditions of Bi₂Ti₄O₁₁ formation are studied. It is shown that the process is diffusion-controlled and depends significantly on the heating rate. The optimal conditions for producing Bi₂Ti₄O₁₁ ceramics are determined. Cold pressing of Bi₂Ti₄O₁₁ ceramic powder at high pressures is shown to influence the unit-cell parameters and volume, positional parameters of Bi and Ti, and bond distances in the ferroelectric ceramics produced by subsequent sintering. The ferroelectric transition temperature decreases steadily with increasing densification pressure.     

Synthesis and Composition of Compounds Containing the B10H- 11 Anion

The compounds MB₁₀H₁₁ (M = Me₄N⁺, Et₄N⁺, Bu₄N⁺, Ph₄P⁺, Ph₄As⁺) are synthesized. A procedure is proposed for boron determination by atomic absorption spectrophotometry, using microwave processing for sample preparation.     

Thomas Fincke und die <Emphasis Type="Italic">Geometria rotundi</Emphasis>

Thomas Fincke (January 6^th, 1561–April 24^th, 1656), born in Flensburg (Germany), was one of the very most important and significant scientists in Denmark during the seventeenth century, a mathematician and astrologer and physician in the beginning of modern science, a representative of humanism and an influentual academic organizer. He studied in Strasbourg (since 1577) and Padua (since 1583) and received his M.D. in Basel (1587), he practised as a physician throughout his life (since 1587 or 1590) and became a professor at Copenhagen (1591). But he was best known because of his Geometriae rotundi libri XIIII (1583), a famous book on plane and spherical trigonometry, based not on Euclid but on Petrus Ramus. In this influentual work, in which Fincke introduced the terms tangent and secant and probable first noticed the Law of Tangents and the so-called Newton-Oppel-Mauduit-Simpson-Mollweide-Gauss-formula, he showed himself to be „abreast of the mathematics of his time“.      

Thin hard coatings fracture propagation during the impact test

One of the most significant applications of the impact test is to investigate thin hard coatings fatigue properties. Herein the test conditions and duration up to the film damage initiation, are considered in order to determine the critical stresses associated with the coating fatigue strength. Moreover, the subsequent film damage propagation is a significant mechanism as well, since it refers to the ability of the coating to withstand loads after its fatigue damage initiation. In order to describe the film fracture propagation the failed area ratio was introduced and an algorithm to determine this magnitude developed, based on the analysis of imprint scanning electron microscopy graphs. The application of the coating failed area ratio will be demonstrated in various impact test film cases, also with superficial thin layers. The top layers do not affect, in general, the failure initiation of the basic coating. However, according to the obtained results, the superficial films influence the basic coating failure propagation rate during the impact test.     

Preparation and properties of heavy-metal halide glasses

We have studied the effect of In³⁺, Pb²⁺, Gd³⁺, and Cl (heavier ions) substitutions for Al³⁺, Ba²⁺, La³⁺, and F^? on the crystallization stability and UV/IR optical properties of HBLAN fluorohafnatc glasses (HfF₄-BaF₂-LaF₃-AlF₃-NaF system). We obtained stable glasses containing InF₃ and BaCl₂ instead of AlF₃ and BaF₂, respectively, and offering increased IR transmission. The presence of CCl₄ in the process atmosphere and the removal of oxygen-containing impurities via directional solidification are shown to have an advantageous effect on the optical quality of the glasses. The fluoride-chloride glasses are capable of accommodating about 1.5 times higher levels of rare-earth activators in comparison with their fluoride analogs.     

Fault-aware Communication Mapping for NoCs with Guaranteed Latency

As feature sizes shrink, transient failures of on-chip network links become a critical problem. At the same time, many applications require guarantees on both message arrival probability and response time. We address the problem of transient link failures by means of temporally and spatially redundant transmission of messages, such that designer-imposed message arrival probabilities are guaranteed. Response time minimisation is achieved by a heuristic that statically assigns multiple copies of each message to network links, intelligently combining temporal and spatial redundancy. Concerns regarding energy consumption are addressed in two ways. First, we reduce the total amount of transmitted messages, and, second, we minimise the application response time such that the resulted time slack can be exploited for energy savings through voltage reduction. The advantages of the proposed approach are guaranteed message arrival probability and guaranteed worst case application response time.     

Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation

This paper deals with the design of a multi-slot hole-coupled microstrip antenna on a substrate of 2 mm thickness that gives multi-frequency (wideband) characteristics. The Method of Moments (MoM)-based IE3D software was used to simulate the results for return loss, VSWR, the Smith chart, and the radiation patterns. A tunnel-based artificial neural network (ANN) was also developed to calculate the radiation patterns of the antenna. The radiation patterns were measured experimentally at 10.5 GHz and 12 GHz. The experimental results were in good agreement with the simulated results from IE3D and those of the artificial neural network. A new method of using a genetic algorithm (GA) in an artificial neural network is also discussed. This new method was used to calculate the resonant frequency of a single-shorting-post microstrip antenna. The resonant frequency calculated using the genetic-algorithm-coupled artificial neural network was compared with the analytical and experimental results. The results obtained were in very good agreement with the experimental results.     

Improved Group multiuser detection with multiple receive antennas in the presence of improper multi-access interference

We consider the transmission of K binary phase-shift keying signals over M diversity channels through a rich scattering environment. Improved group detection rules are proposed to mitigate the effect of the improper multiaccess interference, and an enhancement of the system receive diversity order is shown to be obtained. For example, it is demonstrated that a further gain of |g~|/2 per group is obtained compared with conventional group detection, where |g~| is the interfering group size. In addition, when there is only one antenna per group, the considered receiver with the improved detection rules is equivalent to the decorrelator. In this case, it is shown that (K-1) interferers can be ed out, and that an M-(K-1/2) receive diversity order is achieved, compared with only M-/sup 2/K+1 with the conventional detection rules. Numerical results will further put in evidence such gains.     

A cathode readout gas sampling calorimeter with conductive plastic tubes

We constructed and tested a prototype gas sampling electromagnetic calorimeter of the Pb-proportional tube sandwich type. The calorimeter uses conductive plastic tubes and cathode pad readout with a tower structure which resulted in reasonable energy and spatial resolutions for electrons in the momentum range 0.5–4.0 GeV/c; $\text{σ}{}_{\mathrm{E}}\text{E =}\text{21\%}\text{(E(}\text{GeV}\text{)}\text{)}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{, σ}{}_{\mathrm{x}}\text{= 6}\text{mm}\text{(at 3 GeV}$/c). This paper describes the test and the performance studied under various conditions.