Surfactant intercalated polypyrrole-exfoliated graphene oxide hybrid thin film symmetric supercapacitor

Journal of Materials Science - Surfactant intercalated polypyrrole-exfoliated graphene oxide hybrid thin films were successfully electrodeposited as binder-free electrodes for supercapacitors. The...     

Narrowband Organic Light‐Emitting Diodes for Fluorescence Microscopy and Calcium Imaging

Fluorescence imaging is an indispensable tool in biology, with applications ranging from single‐cell to whole‐animal studies and with live mapping of neuronal activity currently receiving particular attention. To enable fluorescence imaging at cellular scale in freely moving animals, miniaturized microscopes and lensless imagers are developed that can be implanted in a minimally invasive fashion; but the rigidity, size, and potential toxicity of the involved light sources remain a challenge. Here, narrowband organic light‐emitting diodes (OLEDs) are developed and used for fluorescence imaging of live cells and for mapping of neuronal activity in Drosophila melanogaster via genetically encoded Ca²⁺ indicators. In order to avoid spectral overlap with fluorescence from the sample, distributed Bragg reflectors are integrated onto the OLEDs to block their long‐wavelength emission tail, which enables an image contrast comparable to conventional, much bulkier mercury light sources. As OLEDs can be fabricated on mechanically flexible substrates and structured into arrays of cell‐sized pixels, this work opens a new pathway for the development of implantable light sources that enable functional imaging and sensing in freely moving animals.     

Efficient BVH‐based Collision Detection Scheme with Ordering and Restructuring

Bounding volume hierarchy (BVH) has been widely adopted as the acceleration structure in broad‐phase collision detection. Previous state‐of‐the‐art BVH‐based collision detection approaches exploited the spatio‐temporal coherence of simulations by maintaining a bounding volume test tree (BVTT) front. A major drawback of these algorithms is that large deformations in the scenes decrease culling efficiency and slow down collision queries. Moreover, for front‐based methods, the inefficient caching on GPU caused by the arbitrary layout of BVH and BVTT front nodes becomes a critical performance issue. We present a fast and robust BVH‐based collision detection scheme on GPU that addresses the above problems by ordering and restructuring BVHs and BVTT fronts. Our techniques are based on the use of histogram sort and an auxiliary structure BVTT front log, through which we analyze the dynamic status of BVTT front and BVH quality. Our approach efficiently handles inter‐ and intra‐object collisions and performs especially well in simulations where there is considerable spatio‐temporal coherence. The benchmark results demonstrate that our approach is significantly faster than the previous BVH‐based method, and also outperforms other state‐of‐the‐art spatial subdivision schemes in terms of speed.     

Application of multi-criteria decision-making methods to identification of soil moisture monitoring sites in an urban catchment in South Australia

When choosing sites for monitoring of soil moisture for hydrological purposes, a suitable process that considers the factors influencing soil moisture level should be followed. In this study, two multi-criteria decision-making (MCDM) methods, the multi-influencing factor (MIF) method and the analytical hierarchy process (AHP) method, were used to identify the optimal soil moisture monitoring (SMM) sites in the Dry Creek Catchment in South Australia. The most representative areas for nine SMM sites were obtained using the MIF method, considering the factors of rainfall, soil type, land use, catchment slope, elevation, and upslope accumulated area (UAA). The AHP method was used to select the optimal sites using the site-specific criteria. 30.3% of the catchment area in the Australian Water Resources Assessment Landscape (AWRA-L) Grid_DC2 can be considered acceptable as representative area with the MIF method. Four potential sites were evaluated for each AWRA-L grid using the relative weights of the site-specific criteria with the AHP method. The Grid_DC2 required two sites that had the highest overall weight chosen with the AHP analysis. The procedure was repeated for the remaining four AWRA-L grids within the study area to select the required SMM sites.     

A study of the synthesis,kinetics, and characterization of reactive graft copolymers of poly(vinyl imidazole) and cellulose for use as supports in enzyme immobilization and metal ion uptake

In continuation to our earlier work to use bioresource for developing alternate materials for use at the interface of biotechnology and polymer science, we have utilized pine needles as a renewable stock of cellulose to synthesize graft copolymers of vinyl imidazole. Kinetics of N‐VIm by simultaneous γ‐irradiation method has been investigated as a function of total dose, monomer concentration, and amount of water. Effect of water–methanol solvent composition on graft yields and polymerization kinetics has also been studied at the optimum grafting conditions of the total dose and monomer concentration. Effect of some additives such as ZnCl₂, Mohr salt, tetramethylethylene diamine, potassium persulfate, ammonium persulfate as grafting accelerators and promoters has also been studied. Graft copolymers have been characterized by elemental analysis, FTIR, and swelling studies. The graft copolymers have been used as supports for metal ions sorption, enzyme immobilization, and as potential biomimicking catalysts. Sorption behavior of Fe²⁺ ions and Cu²⁺ ions and the immobilization of bovine serum albumin and protease as a function of graft yield has been reported. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1522–1530, 2006     

R-Curve Behavior and Flaw Insensitivity of Ce-TZP/Al2O3 Composite

A ceria-partially-stabilized zirconia-aiumina (Ce-TZP/Al₂O₃) composite optimized for transformation toughening was used to demonstrate its flaw insensitivity due to R -curve behavior. Four-point bend specimens fabricated with a controlled distribution of spherical pores showed nearly the same characteristic strength and strength variability (Weibull modulus) as specimens fabricated without the artificial pores. In situ observations confirmed stable growth of cracks initiated at pores and the crack lengths at fracture instability were much greater than the pore sizes, thus resulting in fracture strengths insensitive to the pores. The small variability in the fracture strength was found to be associated with variability in the R -curve and the instability crack lengths. An analysis based on the fracture instability criterion for rising crack growth resistance accounted for the strength variability due to variability in the R -curve. Comparable four-point bend experiments were also conducted on a sintered yttria-partially-stabilized zirconia (2Y-TZP) ceramic. This ceramic showed significant degradation of strength due to the presence of the pores. This flaw sensitivity is attributed to its steep rising R -curve over short crack lengths.     

Monitoring the curing of furan resins through the exothermic heat of reaction

The curing reaction of furan resins was monitored through the exothermic heat of reaction by means of a simple technique. p-Toluene sulphonic acid dissolved in acetone was used to catalyse the curing reaction. A ‘cure rate index’, defined as the maximum temperature rise per unit time per unit mass of the resin, was used as a measure of the rate of cure. The index value increases exponentially with the catalyst concentration. Interestingly, for the same catalyst concentration the index value also increases significantly with the period of ageing of the catalyst solution. A method is developed for deriving the activation energy for the curing reaction from the exothermic heat data for non-isothermal cure. The activation energy is found to increase with resin viscosity and to decrease exponentially with increasing catalyst concentration. Quantitative expressions are derived relating activation energy with catalyst concentration.     

Molecular interactions in intercalated organically modified clay and clay-polycaprolactam nanocomposites: Experiments and modeling

In this work we have evaluated molecular interactions in organically modified clay and polymer clay nanocomposite using a combination of experimental (photoacoustic FTIR, XRD) and computational (molecular dynamics (MD)) techniques. The FTIR data reveals hydrogen bond and ionic bond interaction between functional end groups of organic modifier and surface oxygen of interlayer clay sheet lying in the organically modified clay; and, the hydrogen bond formation between intercalated polymer and organic modifier and surface oxygen of clay sheet lying in the interlayer clay gallery in the polymer clay nanocomposite. In this work we report the nature of interactions between clay and polymer, clay and organic modifier in polymer-clay nanocomposites through experiments and molecular dynamics simulations.     

Unique behavior of in-situ generated nanosilica particles on physico-mechanical properties of fluoroelastomer

Fluoroelastomer (FKM) rubber containing different weight percentage of in-situ generated nanosilica particles have been prepared by sol-gel method using tetraethoxysilane (TEOS) as precursor and n-butyl amine as catalyst. FKM rubber with precipitated silica particles have also been prepared to compare the effect of in-situ generated nanosilica particles and precipitated silica particles on the physico-mechanical properties of FKM rubber. It is interesting to note that the FKM rubber containing in-situ generated nanosilica particles display excellent tensile stress-strain properties, rheological properties and thermal properties in comparison to the FKM rubber containing precipitated silica particles. The better performance of the in-situ generated nanosilica particles has been attributed to the good dispersion of in-situ generated nanosilica particles in FKM rubber matrix when compared to the precipitated silica particles. The fourier transform infrared (FTIR) spectroscopy clearly confirms the existence of chemical interaction between the FKM rubber chains and the in-situ generated nanosilica particles which leads to the good dispersion of the nanosilica particles in the rubber matrix. Strain sweep studies confirm the presence of more rubber-filler interaction in FKM rubber filled with in-situ generated nanosilica particles. On the other hand, strain sweep studies confirm the presence of more filler-filler aggregation in FKM rubber filled with precipitated silica particles. The dispersion of the in-situ generated nanosilica particles and precipitated silica particles in the surface and bulk of FKM rubber has been studied by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Selected samples have been cured to understand the effect of curing on the efficiency of in-situ generated nanosilica particles and precipitated silica particles on the physico-mechanical properties of FKM rubber.