城市发展战略

城市管理项目（UMP）是联合国人居署实施的一个由多方捐助的项目。通过与城市联盟合作，该项目首先在以下七个城市实施了城市发展战略：巴马科（马里），昆卡（厄瓜多尔），科伦坡（斯里兰卡），约翰内斯堡（南非），圣安德列（巴西），沈阳（中国）和突尼斯（突尼斯）。     

Wastewater treatment using low cost activated carbons derived from agricultural byproducts--a case study

A variety of low cost activated carbons were developed from agricultural waste materials viz., coconut shell, coconut shell fibers and rice husk. The low cost activated carbons were fully characterized and utilized for the remediation of various pollutants viz., chemical oxygen demand (COD), heavy metals, anions, etc., from industrial wastewater. Sorption studies were carried out at different temperatures and particle sizes to study the effect of temperatures and surface areas. The removal of chloride and fluoride increased with rise in temperature while COD and metal ions removal decreased with increase in temperature, thereby, indicating the processes to be endothermic and exothermic, respectively. The kinetics of COD adsorption was also carried out at different temperatures to establish the sorption mechanism and to determine various kinetic parameters. The COD removal was 47-72% by coconut shell fiber carbon (ATFAC), 50-74% by coconut shell carbon (ATSAC) and 45-73% by rice husk carbon (ATRHC). Furthermore, COD removal kinetics by rice husk carbon, coconut shell carbon and coconut fiber carbon at different temperatures was approximately represented by a first order rate law. Results of this fundamental study demonstrate the effectiveness and feasibility of low cost activated carbons. The parameters obtained in this study can be fully utilized to establish fixed bed reactors on large scale to treat the contaminated water.     

Spiral patterns of gold nanoclusters in silicon (100) produced by metal vapour vacuum arc implantation of gold ions

Self-assembled gold nanoclusters are attractive building blocks for future nanoscale sensors and optical devices due to their exciting catalytic properties. In this work, we report direct bottom-up synthesis of spiral patterns of gold nanoclusters in silicon (100) substrates by Au ion implantation followed by thermal annealing. This unique phenomenon is observed only above a critical threshold implantation dose and annealing temperature. Systematic study by electron microscopy, analytical x-ray diffraction and atomic force microscopy shows the temperature-?and time-dependent nucleation, growth of Au nanoclusters and evolution of the spiral patterns. The observed patterns of gold nanoclusters bear a resemblance to the spiral growth prevalent in some directionally solidified eutectic alloys. Based on this systematic study of the growth and morphology of nanoclusters, a tentative model has been proposed for the formation mechanism of this unusual self-assembled pattern in an amorphous Si/Au system. This model shows that melting of the implanted layer is essential and without which no spiral patterns are observed. A better understanding of this self-assembly process will open up new ways to fabricate ordered arrays of gold nanoclusters in silicon substrates for seeding selective growth of one-dimensional nanostructures.     

Hydrogen-enriched non-premixed jet flames: Analysis of the flame surface,flame normal,flame index and Wobbe index

A non-premixed impinging jet flame is studied using three-dimensional direct numerical simulation with detailed chemical kinetics in order to investigate the influence of fuel variability on flame surface, flame normal, flame index and Wobbe index for hydrogen-enriched combustion. Analyses indicate that the fuel composition greatly influences the H₂/CO syngas combustion, not only on the important local stoichiometric iso-mixture fraction surface distribution but also on the vortical structures in the flow field. As a result of CO addition to hydrogen-rich combustion, changes of the reaction zone in the flammable layer, shift of peak flame surface density distribution, shift of non-premixed regions, formation of widely populated scalar dissipation distribution rate with respect to tangential strain and reduction of global heat release are all found to appear. In particular, the CO addition induces a micromixing process which appears to be an important factor for the modelling investigation of turbulence/chemistry interaction especially for combustion modelling of H₂-rich syngas fuels.     

Barium Hydroxide as an Interlayer Between Zinc Oxide and a Luminescent Conjugated Polymer for Light‐Emitting Diodes

A study of hybrid light‐emitting diodes (HyLEDs) fabricated with and without solution‐processible Cs₂CO₃ and Ba(OH)₂ inorganic interlayers is presented. The interlayers are deposited between a zinc oxide electron‐injection layer and a fluorescent emissive polymer poly(9‐dioctyl fluorine–alt‐benzothiadiazole) (F8BT) layer, with a thermally evaporated MoO₃/Au layer used as top anode contact. In comparison to Cs₂CO₃, the Ba(OH)₂ interlayer shows improved charge carrier balance in bipolar devices and reduced exciton quenching in photoluminance studies at the ZnO/Ba(OH)₂/F8BT interface compared to the Cs₂CO₃ interlayer. A luminance efficiency of ≈28 cd A^?1 (external quantum efficiency (EQE) ≈ 9%) is achieved for ≈1.2 μm thick single F8BT layer based HyLEDs. Enhanced out‐coupling with the aid of a hemispherical lens allows further efficiency improvement by a factor of 1.7, increasing the luminance efficiency to ≈47cd A^?1, corresponding to an EQE of 15%. The photovoltaic response of these structures is also studied to gain an insight into the effects of interfacial properties on the photoinduced charge generation and back‐recombination, which reveal that Ba(OH)₂ acts as better hole blocking layer than the Cs₂CO₃ interlayer.     

碳纤维原丝材料——PBO纤维

预计2010年碳纤维的市场约为20亿美元,产量约为3.63万t。碳纤维制造工业的主要挑战是成本效率生产。随着成本的降低,其用途将急剧增加。能够直接从PBO纤维制备碳纤维,无需非常费钱耗时的纤维稳定步骤,意味着能够降低成本。PBO纤维的炭化和石墨化产生优质碳纤维,兼有非常好的热和力学性能。与其他原丝生产碳纤维相比,有非常令人感兴趣的远程有序形成。这导致极好的晶格基性能和较低的电阻率。     

Trivalent chromium removal from wastewater using low cost activated carbon derived from agricultural waste material and activated carbon fabric cloth

An efficient adsorption process is developed for the decontamination of trivalent chromium from tannery effluents. A low cost activated carbon (ATFAC) was prepared from coconut shell fibers (an agricultural waste), characterized and utilized for Cr(III) removal from water/wastewater. A commercially available activated carbon fabric cloth (ACF) was also studied for comparative evaluation. All the equilibrium and kinetic studies were conducted at different temperatures, particle size, pHs, and adsorbent doses in batch mode. The Langmuir and Freundlich isotherm models were applied. The Langmuir model best fit the equilibrium isotherm data. The maximum adsorption capacities of ATFAC and ACF at 25 degrees C are 12.2 and 39.56 mg/g, respectively. Cr(III) adsorption increased with an increase in temperature (10 degrees C: ATFAC--10.97 mg/g, ACF--36.05 mg/g; 40 degrees C: ATFAC--16.10 mg/g, ACF--40.29 mg/g). The kinetic studies were conducted to delineate the effect of temperature, initial adsorbate concentration, particle size of the adsorbent, and solid to liquid ratio. The adsorption of Cr(III) follows the pseudo-second-order rate kinetics. From kinetic studies various rate and thermodynamic parameters such as effective diffusion coefficient, activation energy and entropy of activation were evaluated. The sorption capacity of activated carbon (ATFAC) and activated carbon fabric cloth is comparable to many other adsorbents/carbons/biosorbents utilized for the removal of trivalent chromium from water/wastewater.     

Cyanides‐Free Cyanation of Aryl Halides using Formamide

A novel method for cyanation of aryl halides using formamide as a non‐toxic cyanide source is reported. It is a single‐step, solvent‐free method wherein formamide itself acts as solvent as well as source of cyanide in the presence of phosphorus oxychloride and palladium acetate/xantphos catalyst. Aryl iodides as well as aryl bromides provided moderate to excellent yields of up to 93%.