Transmission loss allocation based on a new quadratic loss expression

This paper presents a derivation of a new quadratic expression for the transmission loss in a power system. The main advantage of this expression is the improvement in accuracy over the other existing approximations. Furthermore, this improved quadratic form allows the transmission loss to be expressed in terms of nodal power injections. This paper builds on the derived loss expression and proposes a bus-loss matrix. This matrix is useful in quantifying the interactions among different bus power injections and establishing a loss allocation scheme for individual buses. Numerical examples are used to illustrate the accuracy of the derived quadratic form and its use in loss allocation.     

Fast‐scale bifurcation in power‐factor‐correction buck‐boost converters and effects of incompatible periodicities

In this paper, we derive the discrete‐time model for the power‐factor‐correction (PFC) buck‐boost converter in terms of a stroboscopic switching map. Fast‐scale instability is analysed through a fold diagram, which exposes the periodicity of the operation as well as the locations of the critical phase angles of the line voltage at which instability begins to occur along a half‐line cycle. The asymmetrical locations of the critical phase angles along a half‐line cycle is explained in terms of ‘under‐developed’ bifurcation. Border collision bifurcations are observed and analysed in detail. Copyright © 2006 John Wiley & Sons, Ltd.     

草酸二异辛酯的合成

以酸化膨润土(SO42-/Bentonite)固体酸为催化剂、草酸和异辛醇为原料合成草酸二异辛酯。考察了焙烧温度对催化剂活性的影响。结果表明,焙烧温度为500℃时催化剂活性最好。考察了反应温度、原料配比、催化剂用量和反应时间等因素对酯化反应的影响,确定了最佳酯化反应工艺条件,即n(异辛醇)∶n(草酸)为3.5∶1、w(SO42-/Bentonite)为2.0%、反应温度140℃、反应时间3 h;在该条件下草酸的转化率达到96.4%。催化剂重复使用6次后,草酸的转化率仍可达到94.4%。     

一起500kV线路计量点事故隐患的分析与思考

本文简要介绍了500kV某回线计量点验收时发现事故隐患的过程,从电容式电压互感器本身结构出发,详细分析了产生事故隐患的原因、带来的危害等,并由此提出了计量点验收工作的重要性和必要性。     

The putative tumor suppressor gene on chromosome 5q for hepatocellular carcinoma is distinct from the MCC and APC genes

We have previously shown that the tumor suppressor gene for hepatocellular carcinoma (HCC) without cirrhosis may be located on chromosome 5q35-qter. In this study, we analyzed nine cases of primary HCC without cirrhosis using probes from the MCC and APC genes, which are in the region 5q21-22. None of the informative cases had allele loss detected by these probes, whereas the probe lambda MS8 for the region 5q35-qter showed allele loss in six out of six informative cases. The results confirm that the putative tumor suppressor gene for HCC without cirrhosis on chromosome 5q is distinct from the MCC and APC genes.     

卷烟信息网络防伪系统的构建及应用

介绍了卷烟信息网络防伪管理系统构建原理、技术特点和功能 ,及其在烟草行业中的应用。     

金刚石薄膜制备和评价

采用平直钨丝作热解源,并借助钨丝支架的弹性恢复力,较好地解决了热丝热解化学气相沉积法(HFCVD)合成金刚石过程中热解丝的变形问题.样品独立加热,基片温度、钨丝温度、钨丝与样品基片距离均可独立调节.装置改进后,在Si(100)上合成了面积大约45mm×25mm的比较均匀的金刚石膜.用扫描电子显微镜(SEM)、Raman光谱和X射线衍射仪对制备的金刚石膜进行了分析.     

转变观念是润滑技术现代化的必要途径

探讨了国内润滑工作存在的问题，分析了近20年来润滑技术的发展状况，介绍了国内先进单位合理用油取得的效益和经验，提出用油现代化的看法。     

低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

对市毛纺二厂中南楼倒塌的分析研究

本市第二毛纺厂中南楼是一幢三层四跨的纯框架结构，它在1976年7月28日的唐山地震中，结构遭受了严重的破坏．后经过加固，在同年的11月15日的宁河地震作用下，房屋全部倒塌，笔者利用平面杆系模型，对其结构进行弹塑性分析，以期得到影响该房屋倒塌的因素。