High-throughput fabrication of organic nanowire devices with preferential internal alignment and improved performance

We demonstrate that arrays of nanowires of conjugated polymers can be easily produced by a simple embossing protocol, compatible with very large scale integration technology. The embossing process is shown to have the supplementary virtue to increase the internal degree of order of the nanowires, significantly enhancing their performance. This is applied to the fabrication of nanowire-based devices consisting of a liquid crystalline light-emitting polymer, of a liquid crystalline semiconducting polymer, and of an amorphous conducting polymer, illustrating the versatility and wide applicability of the method.     

Parallel manipulation of bifunctional DNA molecules on structured surfaces using kinesin-driven microtubules

We have developed a technique to manipulate bifunctional DNA molecules: One end is thiolated to bind to a patterned gold surface and the other end is biotinylated to bind to a microtubule gliding over a kinesin-coated surface. We found that DNA molecules can be stretched and overstretched between the gold pads and the motile microtubules, and that they can form dynamic networks. This serves as a proof-of-principle that biological machineries can be used in vitro to accomplish the parallel formation of structured DNA templates that will have applications in biophysics and nanoelectronics.     

Synthesis of conducting transparent few-layer graphene directly on glass at 450 °C

Post-growth transfer and high growth temperature are two major hurdles that research has to overcome to get graphene out of research laboratories. Here, using a plasma-enhanced chemical vapour deposition process, we demonstrate the large-area formation of continuous transparent graphene layers at temperatures as low as 450?°C. Our few-layer graphene grows at the interface between a pre-deposited 200 nm Ni catalytic film and an insulating glass substrate. After nickel etching, we are able to measure the optical transmittance of the layers without any transfer. We also measure their sheet resistance directly and after inkjet printing of electrical contacts: sheet resistance is locally as low as 500 Ω sq?1. Finally the samples equipped with printed contacts appear to be efficient humidity sensors.     

Explicit model of photovoltaic panels to determine voltages and currents at the maximum power point

A simple explicit photovoltaic formulation for characterizing and dimensioning cell-arrays is presented. The method permits the short-circuit current, the open-circuit voltage, the maximum cell power and the optimum cell-operation conditions to be determined. Further, the model also allows quantifying the effects of panel temperature and solar irradiance on key cell parameters. Based on several datasheets, the methodology is validated by covering a wide range of operation conditions. The proposed approach can thus, be very useful for design engineers to quickly and easily determine the performance of any photovoltaic array without performing tedious numerical calculations.     

Deactivation of Streptococcus mutans Biofilms on a Tooth Surface Using He Dielectric Barrier Discharge at Atmospheric Pressure

This paper presents a study of the effect of the low temperature atmospheric helium dielectric barrier discharge(DBD) on the Streptococcus mutans biofilms formed on tooth surface. Pig jaws were also treated by plasma to detect if there is any harmful effect on the gingiva.The plasma was characterized by using optical emission spectroscopy.Experimental data indicated that the discharge is very effective in deactivating Streptococcus mutans biofilms.It can destroy them with an average decimal reduction time(D-time) of 19 s and about 98%of thein were killed after a treatment time of 30 s.According to the survival curve kinetic an overall 32 s treatment time would be necessary to perform a complete sterilization.The experimental results presented in this study indicated that the helium dielectric barrier discharge,in plan-parallel electrode configuration,could be a very effective tool for deactivation of oral bacteria and might be a promising technique in various dental clinical applications.     

Influence of the Carbo-Chromization Process on the Microstructural,Hardness, and Corrosion Properties of 316L Sintered Stainless Steel

We report on the changes on the microstructural, hardness, and corrosion properties induced by carbo-chromization of 316L stainless steel prepared by Spark Plasma Sintering technique. The thermo-chemical treatments have been performed using pack cementation. The carburizing and chromization were carried out between 1153 K (880 °C)/4 h to 1253 K (980 °C)/12 h and 1223 K (950 °C)/6 h to 1273 K (1000 °C)/12 h in a solid powder mixture of charcoal/BaCO₃ and ferrochromium/alumina/NH₄Cl, respectively. The obtained layers were investigated using X-ray and electron diffraction, optical and scanning electron microscopies, Vickers micro-hardness, and potentiodynamic measurements. The thickness of the carbo-chromized layer ranges between 300 and 500 μm. Besides the host γ-phase, the layers are mainly constituted of carbides (Fe₇C₃, Cr₂₃C₆, Cr₇C₃, and Fe₃C) and traces of α′-martensite. The average hardness values decrease smoothly from 650 HV at the sample surface down to 200 HV at the center of the sample. The potentiodynamic tests revealed that the carbo-chromized samples have smaller corrosion resistance with respect to the untreated material. For strong chromization regimes, the corrosion rate is increased by a factor of four with respect to that of the untreated material, while the micro-hardness of the layer is three times larger. Such materials are suited to be used in environments where good corrosion resistance and wear properties are required.     

Interaction of silicon-based quantum dots with gibel carp liver: oxidative and structural modifications

Quantum dots (QDs) interaction with living organisms is of central interest due to their various biological and medical applications. One of the most important mechanisms proposed for various silicon nanoparticle-mediated toxicity is oxidative stress. We investigated the basic processes of cellular damage by oxidative stress and tissue injury following QD accumulation in the gibel carp liver after intraperitoneal injection of a single dose of 2 mg/kg body weight Si/SiO₂ QDs after 1, 3, and 7 days from their administration.QDs gradual accumulation was highlighted by fluorescence microscopy, and subsequent histological changes in the hepatic tissue were noted. After 1 and 3 days, QD-treated fish showed an increased number of macrophage clusters and fibrosis, while hepatocyte basophilia and isolated hepatolytic microlesions were observed only after substantial QDs accumulation in the liver parenchyma, at 7 days after IP injection.Induction of oxidative stress in fish liver was revealed by the formation of malondialdehyde and advanced oxidation protein products, as well as a decrease in protein thiol groups and reduced glutathione levels. The liver enzymatic antioxidant defense was modulated to maintain the redox status in response to the changes initiated by Si/SiO₂ QDs. So, catalase and glutathione peroxidase activities were upregulated starting from the first day after injection, while the activity of superoxide dismutase increased only after 7 days. The oxidative damage that still occurred may impair the activity of more sensitive enzymes. A significant inhibition in glucose-6-phosphate dehydrogenase and glutathione-S-transferase activity was noted, while glutathione reductase remained unaltered.Taking into account that the reduced glutathione level had a deep decline and the level of lipid peroxidation products remained highly increased in the time interval we studied, it appears that the liver antioxidant defense of Carassius gibelio does not counteract the oxidative stress induced 7 days after silicon-based QDs exposure in an efficient manner.     

Skin Inflammation Modulation via TNF-α, IL-17, and IL-12 Family Inhibitors Therapy and Cancer Control in Patients with Psoriasis

The systemic inflammatory syndrome concept is one of the foundations that stand at the basis of revolutionary modern and future therapies, based on the in-depth understanding of the delicate mechanisms that govern the collaboration between the systems and organs of the human body and, at the same time, the fine balance that ensures a reproach-free operation. An interesting concept that we propose is that of the environment-inadequacy status, a concept that non-specifically incorporates all the situations of the organism’s response disorders in the face of imprecisely defined situations of the environment. The correlation between these two concepts will define the future of modern medicine, along with the gene-adjustment mechanisms. Psoriasis is a clear example of an inadequate body response as a result of exposure to as of yet undefined triggers with an excessive systemic inflammatory reaction and hitherto insufficiently controllable. Modern biological therapies, such as TNF-α, IL-12 family, and IL-17 inhibitors, are intended to profoundly reshape the cytokine configuration of patients with inflammatory diseases such as psoriasis, with tremendous success in disease control. Yet, because of the important roles of cytokines in cancer promotion and control, concern was raised about the fact that the use of biologicals may alter immune surveillance and promote cancer progression. Both theoretical and practical data nevertheless showed that the treatment-induced control of cytokines may be beneficial for reducing the inflammatory milieu that promotes cancer and such have a beneficial role in maintaining health. We briefly present the intricate roles of those cytokine families on cancer control, with some debates on if their inhibition might or might not promote additional tumoral development.     

Eco-efficient Separation of Mono- and Dichloroacetic Acid by Thermally Coupled Extractive Distillation

Due to its high reactivity, monochloroacetic acid (MCA) is an essential intermediate used in the manufacturing of a wide variety of chemicals. Its industrial production process is highly energy- and capital-intensive, requiring costly purification steps to remove dichloroacetic acid (DCA) impurities. Here, an innovative eco-efficient process for MCA-DCA separation is proposed based on extractive distillation in a fully thermally coupled system (a dividing-wall column (DWC) or an equivalent side-rectifier configuration) using a new effective solvent: diethylene glycol dipentylether. The design was optimized by performing sensitivity analyses and varying key operating and design parameters. The study proves that separating MCA-DCA by an extractive DWC (or thermally coupled) is feasible, efficient, controllable, economic, and sustainable.