Model-based control of temperature and energy requirements in a fluidised furnace reactor

The main objective is to improve the control performance during catalyst processing experiments in a furnace heated fluidised bed reactor. A model-based predictive control strategy is implemented for the tight control of the reactor temperature and the overall energy requirements. A detailed dynamic model is developed for the furnace reactor and validated using open-loop experimental data. Dynamic programming techniques are used for the calculation of the optimal sequence of manipulated variables that minimise the difference between the desired and the predicted reactor temperature trajectories. The model predictive control strategy leads to superior performance than the previously installed system that consisted of conventional PID controllers.     

Inhibition of butter oxidation by <Emphasis Type="Italic">N</Emphasis>-acetyl-cysteine and glutathione

The ability of N-acetyl-cysteine and glutathione to inhibit the oxidation of butter was evaluated. Peroxide value and thiobarbituric acid reactive substances were monitored during storage of butter at 50 °C for up to 84 days and at 110 °C for up to 12 h. N-Acetyl-cysteine and glutathione inhibited butter oxidation at 50 °C and at 110 °C. They were active at 10 mg/L and in a higher degree at 20 mg/L. N-Acetyl-cysteine appeared to be more active than glutathione. At 50 °C, N-acetyl-cysteine at 20 mg/L exhibited antioxidant activity comparable to that of butylated hydroxyanisole (BHA) at 200 mg/L. Volatile aldehydes were also determined during storage of butter at 50 °C for 10 days. N-Acetyl-cysteine and glutathione, each at 20 mg/L, inhibited the formation of several volatile aldehydes such as hexanal to an extent equal to BHA at 200 mg/L. Present results indicate that N-acetyl-cysteine and glutathione, especially the former, may be taken into account as antioxidants in butter during storage and cooking.     

Inhibition of corn oil oxidation by N-acetyl-cysteine and glutathione

The ability of N-acetyl-cysteine and glutathione to inhibit the oxidation of corn oil was evaluated.     

Influence of strontium for calcium substitution on the glass–ceramic network and biomimetic behavior in the ternary system SiO<Subscript>2</Subscript>–CaO–MgO

Strontium (Sr) enhances bone formation both in vitro and in vivo, while it reduces bone resorption. Thus, Sr incorporation in bioactive glass–ceramic scaffolds for bone tissue regeneration could further enhance osteogenesis. The aim of this work was the synthesis, characterization and investigation of the apatite-forming ability in inorganic environment of two sol–gel-derived bioactive Sr-containing glass–ceramic materials with 5 and 10% of SrO. The thermal properties of the synthesized materials were studied using differential thermal analysis (TG–DTA). The apatite-forming ability test was conducted in SBF for various immersion times for both thermally treated and untreated samples. The characterization of the samples before and after immersion in SBF was performed with Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and scanning electron microscopy with associated energy-dispersive spectroscopy. FTIR spectra revealed that all synthesized glass–ceramic materials presented the characteristic bands of silicate glasses, while XRD identified various crystalline phases, mostly calcium silicates. Strontium is present in the form of strontium silicate in both as-received and thermally treated specimens, and Sr-diopside in the thermally treated specimens. The apatite-forming ability of the glass–ceramic materials was confirmed by the formation of a hydroxyapatite layer after 3 and 5 days of immersion in SBF on the surface of the untreated and thermally treated samples, respectively. The apatite layer, also, became thicker as the immersion time increased.     

Infrastructure,automation and model-based operation strategy in a stand-alone hydrolytic solar-hydrogen production unit

An autonomous power system that exploits solar energy for the production of hydrogen through water electrolysis is fully assessed in terms of system implementation and optimal operating strategy. A 10 kW_p photovoltaic array supplies energy to a PEM electrolyzer rated at 6.9 kW_p. In order to maintain a smooth operation regardless of the inherent weather fluctuations, a 1000 Ah/24 V lead–acid accumulator stores energy excess and provides it when needed. The monitoring and control of the system is implemented through a Supervisory Control and Data Acquisition system (SCADA), while the interactions between electrical and chemical subsystems are addressed by a complete automation infrastructure. The mathematical models of each subsystem are validated based on real operational data and a model-based power management strategy is proposed and assessed through a parameter sensitivity analysis. Further on, an off-line optimization framework is evaluated regarding the optimal operation of the system in two diverse, but representative time periods. The optimal parameters are identified and their effect on hydrogen production and accumulator utilization is reported.     

Transfer of foodborne pathogenic bacteria to non-inoculated beef fillets through meat mincing machine

The aim of this study was to evaluate the transfer of pathogens population to non-inoculated beef fillets through meat mincing machine. In this regard, cocktails of mixed strain cultures of each Listeria monocytogenes, Salmonella enterica ser. Typhimurium and Escherichia coli O157:H7 were used for the inoculation of beef fillets. Three different initial inoculum sizes (3, 5, or 7 log CFU/g) were tested. The inoculated beef fillets passed through meat mincing machine and then, six non-inoculated beef fillets passed in sequence through the same mincing machine without sanitation. The population of each pathogen was measured. It was evident that, all non-inoculated beef fillets were contaminated through mincing with all pathogens, regardless the inoculum levels used. This observation can be used to cover knowledge gaps in risk assessments since indicates the potential of pathogen contamination and provides significant insights for the risk estimation related to cross-contamination, aiming thus to food safety enhancement.     

Femtosecond laser deposition of TiO2 by laser induced forward transfer

Femtosecond lasers have been used for laser induced forward transfer (LIFT) of TiO₂, a wide-band semiconductor with many industrial and research applications. TiO₂ polycrystalline thin films on quartz (obtained by pulsed laser deposition) were used as donors and both quartz and fluorine-doped tin dioxide coated glass substrates as acceptors. LIFT was performed at the laser wavelengths of 248 and 800 nm with pulses of 450 and 300 fs respectively. The transferred material was characterized by energy-dispersive X-ray spectroscopy, X-ray diffraction and micro-Raman spectroscopy to determine the composition and crystalline quality, and by scanning electron microscopy and atomic force microscopy to assess the surface morphology. The relation between these properties and the laser transfer conditions, including wavelength, pulse energy and acceptor substrate, are presented.     

Effect of Cracking on the Response of Pile Test under Horizontal Loading

Capacity-based design of structures limits the soil-structure interaction mechanism to the determination of the bearing capacity of a pile group. However, in many cases the criterion for the design of piles to resist lateral loads is not the ultimate lateral capacity but the deflection of the piles. Many procedures exist for estimating the response of single piles and pile groups under lateral loading, ranging from application of empirical relationships and simple closed-form solutions to sophisticated nonlinear numerical procedures. With the aim of investigating the effect of cracking, disregarded by most of the above-mentioned methods, a three-dimensional (3D) nonlinear analysis that accounts for cracking is presented. Response prediction correlates well with the experimental data from a full-scale pile load test. Interesting conclusions have also been drawn regarding the discretization of the computational domain and the combination of 3D numerical nonlinear analysis and the structural beam theory.     

Mechanical and adhesion properties of polymer-modified cement mortars in relation with their microstructure

In this study, cement mortars were modified with a commercial polymer admixture. The aim of this study is to investigate the influence of the polymer content on the mechanical and adhesion properties of the mortars and to relate these properties with mortars’ microstructure. A series of mortars were produced with various polymer/cement/water/aggregate ratios. The adhesion properties of the mortars to clay bricks were tested with a simplified tensile testing measurement. The microstructure of mortars, as well as interfaces, were evaluated by Scanning Electron Microscopy (SEM). It was found that with high polymer content, large size hardened particles are formed, reducing the compressive strength of the mortars. Polymer addition enhances the adhesion between the mortar and brick. The mortar microstructure at the interface affects the adhesion properties and the mode of failure.