Synthesis of Flexible Graphene/Polymer Composites for Supercapacitor Applications

In this paper, the graphene was synthesized using biocompatible cellulosic component from onions. Onion epidermal cells were chosen as raw material. During heating at high temperature, the bonding among atoms in material was rearranged and forms two-dimensional hexagonal carbon layer (graphene). The characterization of synthesized graphene was done by x-ray diffractometer, Raman spectrometer and field emission scanning electron microscopy, respectively. An attempt has been taken to form the capacitors with two different current collector electrodes, anticipating the performance of the supercapacitors. The observed capacitance values as-obtained for Al and Au current collector were 1.3 μF and 6.08 μF, respectively. However, when thermally exfoliated graphene was used as an electrode on Al and Au current collector, the capacitance value was drastically increased and found to be 1.6 and 41.25 μF, respectively.     

Progressive cutting tool wear detection from machined surface images using Voronoi tessellation method

Tool condition monitoring by machine vision approach has been gaining popularity day by day since it is a low cost and flexible method. In this paper, a tool condition monitoring technique by analysing turned surface images has been presented. The aim of this work is to apply an image texture analysis technique on turned surface images for quantitative assessment of cutting tool flank wear, progressively. A novel method by the concept of Voronoi tessellation has been applied in this study to analyse the surface texture of machined surface after the creation of Voronoi diagram. Two texture features, namely, number of polygons with zero cross moment and total void area of Voronoi diagram of machined surface images have been extracted. A correlation study between measured flank wear and extracted texture features has been done for depicting the tool flank wear. It has been found that number of polygons with zero cross moment has better linear relationship with tool flank wear than that of total void area.     

One pot synthesis of nano Ag in calcium alginate beads and its catalytic application in p‐Nitrophenol reduction with kinetic parameter estimation and model fitting

In this work, one step process of synthesis of silver nanoparticles (Agnp) embedded in insitu formed calcium alginate (CA) beads is stated. CA, formed from the reaction between sodium alginate and calcium hydroxide, acts as reducing and stabilizing agent as well as support for nanoparticles. The reaction mechanism for the formation and stabilization of Agnp is proposed where the vicinal dihydroxy groups of alginate are assumed to act as the reducing agent for Ag⁺ to Ag°. Transmission electron microscopy (TEM), x‐ray diffraction (XRD), UV‐vis spectroscopy, field emission scanning electron microscopy (FESEM), and atomic absorption spectroscopy (AAS) were used to characterize the Agnp. The formation of spherical nanoparticles with average size range of 4‐5 nm was confirmed by TEM. Catalytic activity of this nano silver‐calcium alginate (Agnp‐CA) composite was evaluated in the reduction of p‐nitrophenol. Concentrations of sodium alginate, calcium hydroxide, and AgNO₃ are found to be the parameters that critically affect the synthesis of Agnp. The efficacy of the catalyst is expressed on the basis of suitable reaction parameters. Both pseudo‐homogeneous and heterogeneous kinetic models are proposed for the reaction to find the best model and the Eley‐Riedel model is found to fit well with the experimental data. The novelty of this work is that the tandem process of CA bead formation, Agnp formation, and Agnp entrapment in CA have been transformed into a single‐step process. Moreover, elaborations of each step of the ionic mechanisms of Agnp formation and p‐NP reduction with Agnp and the establishment of a heterogeneous kinetic model for the reaction are reported for the first time here.     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

Molecular inflammation hypothesis of aging based on the anti-aging mechanism of calorie restriction

Accumulating evidence strongly suggests that oxidative stress underlies aging processes. Research provides consistent evidence that calorie restriction (CR) reduces age-related oxidative stress and has anti-inflammatory properties. However, information is lacking on the molecular mechanism that would better define the interrelation of reactive oxygen species and nitrogen species and the pro-inflammatory states of the aging process. In this review, the biochemical and molecular bases of the inflammatory process in the aging process are analyzed to delineate the molecular inflammation hypothesis of aging. The key players involved in the proposed hypothesis are the age-related upregulation of NF-kappa B, IL-1 beta, IL-6, TNFalpha, cyclooxygenase-2, and inducible NO synthase, all of which are attenuated by CR. Furthermore, age-related NF kappa B activation is associated with phosphorylation by I kappa B kinase/NIK and MAPKs, while CR blocked these activation processes. The modulation of these factors provides molecular insights of the anti-inflammatory action of CR in relation to the aging process. Based on available finding and our recent supporting evidence, we prefer to use "molecular inflammation" to emphasize the importance of the molecular reaction mechanisms and their aberrance, predisposing to fully expressed chronic inflammatory phenomena. It was further proposed that CR's major force of the regulation of redox-sensitive inflammation may well be its life-prolonging action.     

MIXED-CONVECTIVE COOLING OF AN ISOTHERMAL HOT SURFACE BY CONFINED SLOT JET IMPINGEMENT

The flow and heat transfer characteristics in the cooling of a heated surface by impinging slot jets have been investigated numerically. Computations are done for vertically downward-directed two-dimensional slot jets impinging on a hot isothermal surface at the bottom and confined by a parallel adiabatic surface on top. Some computations are also performed where the jet is vertically upward, with an impingement plate at the top. The principal objective of this study is to investigate the associated heat transfer process in the mixed-convective regime. The computed flow patterns and isotherms for various domain aspect ratios (4–10) and for a range of jet exit Reynolds numbers (100–500) and Richardson numbers (0–10) are analyzed to understand the mixed-convection heat transfer phenomena. The local and average Nusselt numbers and skin friction coefficients at the hot surface for various conditions are presented. It is observed that for a given domain aspect ratio and Richardson number, the average Nusselt number at the hot surface increases with increasing jet exit Reynolds number. On the other hand, for a given aspect ratio and Reynolds number, the average Nusselt number does not change significantly with Richardson number, indicating that the buoyancy effects are not very significant in the overall heat transfer process for the range of jet Reynolds number considered in this study. Also, for the same problem configuration, the average Nusselt number does not change significantly when the jet is moving upward or downward.     

Evaluation of the Effectiveness of Water Management Policies in Bangladesh

Water resources development and management policies initiatives in Bangladesh are primarily driven by the need for sufficient food grain production for the country's teeming population and curtailing the perennial flooding problems. It is therefore necessary to investigate whether or not these objectives are being met. The aim of this study is to evaluate the impacts of past water resources development and management strategies on agriculture, food security, flood management and socio-economic development in Bangladesh. The research is based on the historical data of the relevant parameters of the water resources management over the period 1947–2005. The outcomes of the study demonstrate that past policies and strategies of water development have resulted in significant irrigation expansion, especially through intensified groundwater utilization, which has helped to achieve the country's primary objective of self-sufficiency in food production. However, the provision of safe drinking water and sanitation facilities still remains a challenge in the country. Similarly, the impact of the flood control policies was diverse with success mostly apparent with regard to protection against modest events, while catastrophic, extreme events still effectively defying answer.     

Removal of E. coli from water using surface-modified activated carbon filter media and its performance over an extended use

Modification of activated carbon (AC) by aluminum hydroxychloride (AHC), and diatomaceous earth by zinc hydroxide changed the zeta potentials of these filter media from negative to positive. The modification method is amenable to room temperature, and eliminates the essential requirement of strong base treatment for making metal hydroxide coated filter media. Solid-state MAS 27Al NMR spectra suggested the presence of Al13-mer in the AHC-treated AC. AHC-modified AC samples were further treated with silver halide, and two antibacterial compounds to prevent microbial growth on filter media. In situ precipitation of silver bromide on AC resulted in formation of nanosized AgBr crystals. Bacteria removal performances of the modified media were tested in columns. For the first time, we demonstrated that only 30 g of either AHC-treated AC (60 x 200 mesh) or nano AgBr supported AC could provide >6 log E. coli removal over approximately 1000 L when the input water had a bacterial load of 10(7) CFU/mL. The filter media were robust enough to perform even when water was passed at superficial velocities 3-10 times the typical velocity (6 cm/min) of water treatment processes. Metal leaching from the modified media was found to be less than the USEPA specified Maximum Contaminant Level.