Evaluation of high‐resolution and mobile display systems for digital radiology in dark and bright environments using human and computational observers

Abstract— As digital display systems replace film traditionally used for reading radiographic images, resource‐intensive acceptance testing must be performed to ensure that quality meets and maintains desired specifications. If machine observers can replace human readers, whose performances are highly variable, the results will be more consistent and less costly. To be effective, however, the automated observers must track human performance. An approach for a model observer, validated with human readers, for the evaluation of the visibility of low‐contrast small targets in high‐resolution and mobile displays under different ambient illumination, will be described. The displays were tested using CDMAM‐like digital phantoms containing disks of varying diameters and contrasts on a flat background. For this task, we find the best indicator of display performance to be the display's ability to represent small luminance contrast, not resolution or pixel size. The results confirm that high‐resolution systems perform better under low illumination while illuminance has a minor impact on the mobile‐display performance. Finally, the results show that the machine observer tracks the performance of human readers. Machine observers with proper validation can replace humans in the acceptance testing procedures, saving the testers both time and money.     

Some remarks on Bianchi type-II, VIII, and IX models

Within the scope of anisotropic non-diagonal Bianchi type-II, VIII, and IX spacetimes it is shown that the off-diagonal components of the Einstein equations impose severe restrictions on the components of the energy-momentum tensor (EMT) in general. We begin with a metric with three functions of time, a(t), b(t), and c(t), and two spatial ones, f(z) and h(z). It is shown that if the EMT is assumed to be diagonal, and f = f(z), in all cosmological models in question b ∝ c, and the matter distribution is isotropic, i.e., T ₁ ¹ = T ₂ ² = T ₃ ³ . If f = const, which is a special case of BII models, the matter distribution may be anisotropic, but only the z axis is distinguished, and in this case b(t) is not necessarily proportional to c(t).     

Optimal pricing and lot-sizing for perishable inventory with price and time dependent ramp-type demand

Product perishability is an important aspect of inventory control. To minimise the effect of deterioration, retailers in supermarkets, departmental store managers, etc. always want higher inventory depletion rate. In this article, we propose a dynamic pre- and post-deterioration cumulative discount policy to enhance inventory depletion rate resulting low volume of deterioration cost, holding cost and hence higher profit. It is assumed that demand is a price and time dependent ramp-type function and the product starts to deteriorate after certain amount of time. Unlike the conventional inventory models with pricing strategies, which are restricted to a fixed number of price changes and to a fixed cycle length, we allow the number of price changes before as well as after the start of deterioration and the replenishment cycle length to be the decision variables. Before start of deterioration, discounts on unit selling price are provided cumulatively in successive pricing cycles. After the start of deterioration, discounts on reduced unit selling price are also provided in a cumulative way. A mathematical model is developed and the existence of the optimal solution is verified. A numerical example is presented, which indicates that under the cumulative effect of price discounting, dynamic pricing policy outperforms static pricing strategy. Sensitivity analysis of the model is carried out.     

Rates of change of total ozone column and surface relative humidity: seasonal variations over Dum Dum (22° 38′ N, 88° 26′ E)

This article presents a study of the seasonal variability of the rate of change of total ozone column (TOC) and the rate of change of surface relative humidity (RH) over Dum Dum (22° 38′ N, 88° 26′ E) during different seasons of the period 1997–2005. The rate of formation of TOC was a maximum during the pre-monsoon and winter seasons and the rate of decrease of TOC was a maximum during the monsoon and post-monsoon seasons throughout the period of study. The rate of increase of surface RH was a maximum in the pre-monsoon season and the rate decreased during the other seasons. At the monsoon and post-monsoon seasons the rate of decrease of TOC increased with the rate of decrease of surface RH.     

Adsorption Desalination Quenches Global Thirst

The search for fresh or potable water remains a pressing concern throughout many regions of the world. Although most of the Earth's surface is covered by oceans, the effort to provide for the world's inhabitants with fresh or potable water seems to be insurmountable; at least one billion people do not have access to clean and fresh water. The World Health Organization (WHO) reported that about 41% of the Earth's population lives in water-stressed areas, and the number of people in the water scarce regions may climb to 3.5 billion by the year 2025. Thus, innovative and cost-effective desalination technologies for producing fresh water are needed to provide practical solutions.     

Natural convection boundary-layer adjacent to an inclined flat plate subject to sudden and ramp heating

The natural convection thermal boundary-layer adjacent to an inclined flat plate subject to sudden heating and a temperature boundary condition which follows a ramp function up until a specified time and then remains constant is investigated. The development of the flow from start-up to a steady state has been described based on scaling analyses and verified by numerical simulations. Different flow regimes based on the Rayleigh number are discussed with numerical results for both boundary conditions. For ramp heating, the boundary-layer flow depends on the comparison of the time at which the ramp heating is completed and the time at which the boundary layer completes its growth. If the ramp time is long compared with the steady-state time, the layer reaches a quasi-steady mode in which the growth of the layer is governed solely by the thermal balance between convection and conduction. On the other hand, if the ramp is completed before the layer becomes steady; the subsequent growth is governed by the balance between buoyancy and inertia, as for the case of instantaneous heating.     

A review of natural convection and heat transfer in attic-shaped space

This paper presents a review of studies on natural convection heat transfer in the triangular enclosure namely, in attic-shaped space. Much research activity has been devoted to this topic over the last three decades with a view to providing thermal comfort to the occupants in attic-shaped buildings and to minimising the energy costs associated with heating and air-conditioning. Two basic thermal boundary conditions of attic are considered to represent hot and cold climates or day and night time. This paper also reports on a significant number of studies which have been performed recently on other topics related to the attic space, for example, attics subject to localized heating and attics filled with porous media.     

Experimental investigation and empirical modeling of the dry electric discharge machining process

Dry electric discharge machining (EDM) is an environment-friendly modification of the oil EDM process in which liquid dielectric is replaced by a gaseous medium. In the current work, parametric analysis of the process has been performed with tubular copper tool electrode and mild steel workpiece. Experiments have been conducted using air as the dielectric medium to study the effect of gap voltage, discharge current, pulse-on time, duty factor, air pressure and spindle speed on material removal rate (MRR), surface roughness (R_a) and tool wear rate (TWR). First, a set of exploratory experiments has been performed to identify the optimum tool design and to select input parameters and their levels for later stage experiments. Empirical models for MRR, R_a and TWR have then been developed by performing a designed experiment based on the central composite design of experiments. Response surface analysis has been done using the developed models. Analysis of variance (ANOVA) tests were performed to identify the significant parameters. Current, duty factor, air pressure and spindle speed were found to have significant effects on MRR and R_a. However, TWR was found to be very small and independent of the input parameters.     

Enzymatic hydrolysis and fermentation of lime pretreated wheat straw to ethanol

BACKGROUND: The objective of this work is to develop an efficient pretreatment method that can help enzymes break down the complex carbohydrates present in wheat straw to sugars, and to then ferment of all these sugars to ethanol. RESULTS: The yield of sugars from wheat straw (8.6%, w/v) by lime pretreatment (100 mg g^?1 straw, 121 °C, 1 h) and enzymatic hydrolysis (45 °C, pH 5.0, 120 h) using a cocktail of three commercial enzyme preparations (cellulase, β‐glucosidase, and xylanase) at the dose level of 0.15 mL of each enzyme preparation g^?1 straw was 568 ± 13 mg g^?1 (82% yield). The concentration of ethanol from lime pretreated enzyme saccharified wheat straw (78 g) hydrolyzate by recombinant Escherichia coli strain FBR5 at pH 6.5 and 35 °C in 24 h was 22.5 ± 0.6 g L^?1 with a yield of 0.50 g g^?1 available sugars (0.29 g g^?1 straw). The ethanol concentration was 20.6 ± 0.4 g L^?1 with a yield of 0.26 g g^?1 straw in the case of simultaneous saccharification and fermentation by the E. coli strain at pH 6.0 and 35 °C in 72 h. CONCLUSION: The results are important in choosing a suitable pretreatment option for developing bioprocess technologies for conversion of wheat straw to fuel ethanol. Copyright © 2007 Society of Chemical Industry     

Influence of two apo A4 polymorphisms at codons 347 and 360 on non-fasting plasma lipoprotein-lipids and apolipoproteins in Asian Indians

The spi gene of Streptococcus pneumoniae was cloned and its nucleotide sequence was determined. It encodes a protein of 204 amino acids that is homologous to bacterial signal peptidase I proteins. The S. pneumoniae protein contains all of the conserved amino acid sequence motifs previously identified in this enzyme from both prokaryotic and eukaryotic sources. Sequence comparisons revealed several additional motifs characteristic of the enzyme. The cloned S. pneumoniae gene complemented an Escherichia coli mutant defective in its leader peptidase gene. Expression of the spi gene in S. pneumoniae appeared to be essential for viability. The cloned gene was shown to produce a polypeptide of approximately 20 kDa. Overproduction of the S. pneumoniae spi gene in an E. coli expression system gave a native protein product, soluble in the presence of a non-ionic detergent, which should be amenable to structural determination.