Efficient Engineering and Production Concepts for Products in Regulated Environments – Dream or Nightmare?

Manufacturing of chemical‐pharmaceutical products is moving increasingly fast on a global scale. Therefore, developing and starting up production facilities fast, with high quality, and at reasonable costs has become extremely challenging. Engineering concepts like modularization, standardization and simultaneous/parallel engineering are discussed as methods for speeding up process design and filing for regulatory approval. Transfer from batch to continuous operation mode of production is pointed out as the key‐issue in such strategies.     

Development and Evaluation of a Nanoparticle Generator for Human Inhalation Studies with Airborne Zinc Oxide

In the EU there is an increasing need for regulatory agencies to derive health based threshold limits based on human inhalation studies with airborne particles. A necessary prerequisite for such projects is the development of a suitable generator system to produce nanoparticle test aerosols for human whole-body inhalation studies. We decided to use a generator with flame-based heating of aqueous precursor solutions. Validation of the test system was done by generating zinc oxide (ZnO) nanoparticles with minimal contamination of trace gases, i.e., nitric oxides or carbon monoxide that could confound the effects seen in exposed subjects. ZnO was selected based on the uncertainties surrounding its health effects after exposure at the workplace. The generation process of the developed flame generator yields ZnO nanoparticles with monomodal size distribution and very good temporal stability. The maximum target exposure mass concentration of 2 mg/m³ ZnO, with a resulting median particle diameter of 57 nm, is attainable in our human exposure laboratory. The morphological examination shows typical agglomerates and aggregates formed by high temperature processes. Overall, the performed experiments confirm that a constant exposure can be provided for all subjects at all times.

Copyright 2014 American Association for Aerosol Research     

Pre-adolescent children exhibit lower aerosol particle volume emissions than adults for breathing,speaking, singing and shouting

Speaking and singing are activities linked to increased aerosol particle emissions from the respiratory system, dependent on the utilized vocal intensity. As a result, these activities have experienced considerable restrictions in enclosed spaces since the onset of the COVID-19 pandemic due to the risk of infection from the SARS-CoV-2 virus, transmitted by virus-carrying aerosols. These constraints have affected public education and extracurricular activities for children as well, from in-person music instruction to children’s choirs. However, existing risk assessments for children have been based on emission measurements of adults. To address this, we measured the particle emission rates of 15 pre-adolescent children, all eight to ten years old, with a laser particle counter for the test conditions: breathing at rest, speaking, singing and shouting. Compared with values taken from 15 adults, emission rates for breathing, speaking and singing were significantly lower for children. Particle emission rates were reduced by a factor of 4.3 across all conditions, whereas emitted particle volume rates were reduced by a factor of 4.8. These data can supplement SARS-CoV-2 risk management scenarios for various school and extracurricular settings.     

Photochemie von Acylaziden. VIII [1]. Reagieren Acylnitrene wie 1,3-Dipole??

Photochemistry of Acylazides. VIII. Do Acylnitrenes React like 1,3-Dipoles? The formation of three- ore five-membered heterocyclic rings by the reaction of acylnitrenes with olefins depends on the electron density at the double bond. The generally expected formation of aziridines by a cheletropic reaction was observed by photolysis of aroylazides 1 in the presence of 2,5-dihydrofuran 2 . But with enolethers 3 and 4 oxazolines were directly formed. This [3 + 2] cycloaddition is regiospecific. The cycloaddition is modestly stereoselective by steric hindrance within the cyclic enolether 3b . Very small de-values were found with chiral substituents in the acylazide 13 . The azide decomposition was also achieved by photoinduced electron transfer. The same cycloaddition products as obtained by direct photolysis of the azides were obtained via radical anions of the acylazide. Using Michler's ketone as electron donor in the triplet state the formation of isocyanate which diminishes the yield of cycloadducts can be avoided.     

SMART-Reactors: Tailoring Gas Holdup Distribution by Additively Manufactured Lattice Structures

In chemical process engineering, fast gas-liquid reactions often suffer from an inefficient distribution of gas and therefore mixing and mass transfer performance. This study deals with the possibility of influencing the local gas holdup and bubble size distribution in a gas-liquid process using additively manufactured lattice structures (AMLS). The used measuring technique to study bubble size, velocity, and the local gas holdup is a photo-optical needle probe. By using AMLS, a significant radial homogenization of the local gas holdup and the mean bubble size is achieved. Furthermore, it can be demonstrated that the bubble size can be tailored by the geometry of the inserted structure. It is illustrated that the mean bubble velocities are lowered within the lattice resulting in a higher residence time of the dispersed phase with an impact on the mass transfer performance within the AMLS.     

采用水基前驱溶液喷墨印刷制备光催化活性TiO2薄膜

摘译 近年来,作为一种高能量带隙半导体,二氧化钛(TiO2)由于在紫外光照射下具有良好的光催化活性,已引起科研人员的广泛关注.由于TiO2无色透明,具有广泛的应用前景,如薄的TiO2涂层可用于创建自清洁、防雾、超亲水表面.同时,也能用于太阳能电池等光电子行业. 化学溶液沉积法因具有相对简单的大面积生产工艺,且较低的制膜成本和高可用性,成为TiO2薄膜制备常用的方法之一.针对另一种TiO2制备方法,即溶胶凝胶法,大量研究文献主要关注乙醇的水解控制.然而,工业需求鼓励开发水基前驱设计.其难度在于钛醇盐与水的高反应性.在有机介质中,加入少量的水往往导致水解.因此,需要采用络合剂作为稳定剂,阻止纯水中的水解反应和避免由此产生的产物沉淀.     

Effect of pasture vs. concentrate diet on CLA isomer distribution in different tissue lipids of beef cattle

This study examined the effects of feeding pasture vs. concentrate on the distribution of CLA isomers in the lipids of longissimus and semitendinosus muscle, liver and heart muscle, and subcutaneous fat in beef bulls. Sixty-four German Holstein and German Simmental bulls were randomly allocated to either an indoor concentrate system or periods of pasture feeding followed by a finishing period on a concentrate containing linseed to enhance their beef content of n−3 PUFA and CLA. The concentrations of CLA isomers in the different tissues were determined by GC and silver ion HPLC. The diet affected the distribution of individual CLA isomers in the lipids of the different tissues. The concentration (mg/100 g fresh tissue) of the most prominent isomer, cis-9,trans-11 18∶2, was increased up to 1.5 times in liver and heart tissue of bulls fed on pasture as compared with concentrate. However, no diet effect was observed for cis-9,trans-11 18∶2 in the lipids of longissimus muscle and subcutaneous fat. In all tissues, the second-most abundant CLA isomer in concentratefed bulls was trans-7,cis-9 18∶2. In contrast, trans-11,cis-13 18∶2 was the second-most abundant CLA isomer in all investigated tissue lipids of pasture-fed bulls. The concentration of the trans-11,cis-13 18∶2 isomer was up to 15 times higher in tissues of pasture-fed bulls as compared with concentrate-fed animals. Furthermone, diet affected the concentrations of the CLA trans,trans 18∶2 isomers. Pasture feeding significantly increased the concentrations of some trans,trans 18∶2 isomers as compared with concentrate, predominantly trans-12,trans-14 18∶2 and trans-11,trans-13 18∶2. Overall, pasture feeding resulted in significantly increased concentrations of the sum of CLA isomers in the lipids of longissimus, muscle, subcutaneous fat, heart and liver muscle of German Holstein and German Simmental bulls, but not in semitendinosus muscle.     

Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells

A new approach is presented in order to improve the thermal stability of polymer: [6-6]-phenyl C₆₁ butyric acid methyl ester (PCBM) bulk heterojunction solar cells. The central idea in this approach is the use of a polymer with high glass transition temperature (T_g), well above the normal operating temperatures of the devices. In this paper, a PPV-derivative with a T_g of 150 °C was used as an electron donor and the thermal stability of the obtained solar cells was compared with solar cells based on the reference material poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene] (MDMO-PPV) with a T_g of 45 °C. The use of the material with higher glass transition temperature resulted in a significant improvement of the thermal stability of the photovoltaic parameters. Furthermore, a systematic transmission electron microscope (TEM) study demonstrates that the better thermal stability of performance coincides with a more stable active layer morphology. Both improvements are attributed to the reduced free movement of the electron donor material (PCBM) within the active layer of the solar cell.