Cloning and sequence analysis of a gene (aly PG) encoding poly(alpha-L-guluronate)lyase from Corynebacterium sp. strain ALY-1

The aly PG gene, coding for a poly alpha-l-guluronate lyase (PG lyase) of Corynebacterium strain ALY-1, was cloned and sequenced. The gene consists of 768 bp encoding a signal peptide of 32 amino acids and a mature protein of 224 amino acids. Two disulfide bond cross-linkages were found to be formed between Cys-4 and Cys-51 and between Cys-200 and Cys-206 in the native PG lyase molecule. The deduced amino acid sequence of the Corynebacterium sp. aly PG gene exhibited 29% homology toward that of the Klebsiella pneumoniae, subsp. aerogenes aly A gene, with two conserved regions (the amino acid sequences from Y-102 to M-110 and from Y-221 to Q-229).     

On a posteriori estimates of inverse operators for linear parabolic initial-boundary value problems

We present numerically verified a posteriori estimates of the norms of inverse operators for linear parabolic differential equations. In case that the corresponding elliptic operator is not coercive, existing methods for a priori estimates of the inverse operators are not accurate and, usually, exponentially increase in time variable. We propose a new technique for obtaining the estimates of the inverse operator by using the finite dimensional approximation and error estimates. It enables us to obtain very sharp bounds compared with a priori estimates. We will give some numerical examples which confirm the actual effectiveness of our method.     

Enhanced catalytic activity of nanoshell carbon co-doped with boron and nitrogen in the oxygen reduction reaction

The use of carbon cathode catalysts in polymer electrolyte fuel cells instead of the current platinum catalysts is attracting increasing attention. We claim that two factors are important for enhancing the activity of carbon cathode catalysts in the oxygen reduction reaction (ORR): the formation of a nanoshell structure and co-doping with boron and nitrogen. Herein, we investigate the preparation and characterization of active ORR carbon catalysts that combine the above factors. Boron and nitrogen (BN)-doped nanoshell-containing carbon (BN-NSCC) was prepared by carbonizing a mixture of poly(furfuryl alcohol), cobalt phthalocyanine, melamine, and a trifluoroborane–methanol complex at 1000 °C. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed the formation of nanoshell structures with distorted graphitic layers and the introduction of boron and nitrogen atoms, respectively. The ORR activity was evaluated in oxygen-saturated 0.5 mol dm^?3 H₂SO₄ using Koutecky–Levich analysis. The BN-NSCC showed an eight to ten times higher ORR activity than undoped NSCC, with an increased number of electrons participating in the reaction. Tafel analysis revealed a change in the rate-determining step caused by BN-doping. Thus, the combination of a nanoshell structure and co-doping with boron and nitrogen was found to improve the ORR activity of carbon catalysts.     

Development of insertion-type peristalsis pump using pneumatic artificial muscles

This study aims to develop a new type of peristaltic pump that transports high-viscosity and solid–liquid mixture fluids. Pumps capable of transporting such fluids are essential in various situations such as factory transportation, outdoors, and emergencies. These fluids are conventionally transported by positive-displacement and rotodynamic pumps. However, solid–liquid fluids could collide with the impeller of the rotodynamic pump and thereby damage the pump, whereas the positive-displacement pump must be sufficiently large to apply high pressure to the transported fluid. A small pump that can transport these fluids would save factory space and enable outdoor applications such as dredging operations. Thus, we adopted earthworm peristalsis as a model mechanism of fluid transport within a standard plumbing infrastructure. The insertion-type peristaltic pump developed in this study uses an artificial rubber muscle to achieve an earthworm-like mechanism. The capability and energy efficiency of the mechanism is evaluated in water transportation experiments.     

Thermal Spray Using a High-Frequency Pulse Detonation Combustor Operated in the Liquid-Purge Mode

Experiments on thermal spray by pulsed detonations at 150 Hz were conducted. Two types of pulse detonation combustors were used, one operated in the inert gas purge (GAP) mode and the other in the liquid-purge (LIP) mode. In both modes, all gases were supplied in the valveless mode. The GAP mode is free of moving components, although the explosive mixture is unavoidably diluted with the inert gas used for the purge of the hot burned gas. In the LIP mode, pure fuel-oxygen combustion can be realized, although a liquid-droplet injector must be actuated cyclically. The objective of this work was to demonstrate a higher spraying temperature in the LIP mode. First, the temperature of CoNiCrAlY particles heated by pulsed detonations was measured. As a result, the spraying temperature in the LIP mode was higher than that in the GAP mode by about 1000 K. Second, the temperature of yttria-stabilized zirconia (YSZ) particles, whose melting point was almost 2800 °C, heated by pulsed detonations in the LIP mode was measured. As a result, the YSZ particles were heated up to about 2500 °C. Finally, a thermal spray experiment using YSZ particles was conducted, and a coating with low porosity was successfully deposited.     

Use of polyethylene films photografted with 2‐(dimethylamino)ethyl methacrylate as a potential adsorbent for removal of chromium (VI) from aqueous medium

A new polymeric adsorbent material based on polyethylene (PE) was prepared by photografting of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) as a positively chargeable monomer to a PE film. The effects of the experimental parameters, such as the pH value, temperature, and grafted amount on adsorption of chromium(VI) (Cr(VI)) ions were investigated for the DMAEMA‐grafted PE (PE‐g‐PDAMEMA) films. The maximum adsorption capacity was obtained at the initial pH value of 3.0 for a PE‐g‐PDMAEMA film with 1.8 mmol/g and the maximum adsorption capacity obtained was higher than or compatible to those of many of the other polymeric adsorbents prepared for Cr(VI) ions. The adsorption kinetics obeyed the mechanism of the pseudo‐second order kinetic model and adsorption of Cr(VI) ions on PE‐g‐PDMAEMA films was well expressed by the Langmuir isotherm model. A high Langmuir adsorption constant suggests that the adsorption of Cr(VI) ions occurs between protonated dimethylamino groups and ions mainly through the electrostatic interaction. Cr(VI) ions adsorbed were successfully desorbed from a PE‐g‐PDMAEMA film in solutions of NaCl, NH₄Cl, NH₄Cl containing NaOH, and NaOH and a PE‐g‐PDMAEMA film was regenerated and repeatedly used for adsorption of Cr(VI) ions without appreciable loss in the adsorption capacity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43360.     

The Functions of Metallothionein and ZIP and ZnT Transporters: An Overview and Perspective

Around 3000 proteins are thought to bind zinc in vivo, which corresponds to ~10% of the human proteome. Zinc plays a pivotal role as a structural, catalytic, and signaling component that functions in numerous physiological processes. It is more widely used as a structural element in proteins than any other transition metal ion, is a catalytic component of many enzymes, and acts as a cellular signaling mediator. Thus, it is expected that zinc metabolism and homeostasis have sophisticated regulation, and elucidating the underlying molecular basis of this is essential to understanding zinc functions in cellular physiology and pathogenesis. In recent decades, an increasing amount of evidence has uncovered critical roles of a number of proteins in zinc metabolism and homeostasis through influxing, chelating, sequestrating, coordinating, releasing, and effluxing zinc. Metallothioneins (MT) and Zrt- and Irt-like proteins (ZIP) and Zn transporters (ZnT) are the proteins primarily involved in these processes, and their malfunction has been implicated in a number of inherited diseases such as acrodermatitis enteropathica. The present review updates our current understanding of the biological functions of MTs and ZIP and ZnT transporters from several new perspectives.     

Mechanical role of reinforcement in seismic behavior of steel-strip reinforced earth wall

In the current design practices of steel-strip reinforced earth walls (SSREWs), the length of the reinforcing material is determined based on the equilibrium between the reinforcement tension and the earth pressure acting on the wall. Here, the resistance of the reinforcing material laid in the active failure zone (AFZ) is not considered. Moreover, the mechanical role of the reinforcing material against the integrity of the SSREW has not been sufficiently verified. Regarding the seismic stability of SSREW, although it is investigated by treating the entire reinforced earth wall as a rigid body, this inspection method is for gravity-retaining walls, and the difference in the seismic behavior between the SSREW and the rigid body is not clear. In this study, therefore, dynamic centrifuge model tests on 6 types of SSREWs were conducted to clarify the following items: (1) the basic earthquake behavior of a SSREW, (2) the mechanical role of the reinforcing material laid in the AFZ and (3) the mechanical role of the reinforcing material against the integrity of the SSREW. The results indicated that the reinforcing material laid in the AFZ can restrain the amount of deformation of the wall during earthquakes. Furthermore, the more stable the AFZ is, the smaller the maximum wall displacement will be.     

Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.