SESAME-S: Semantic Smart Home System for Energy Efficiency

As the urgent need for efficient and sustainable energy usage becomes ever more apparent, interest in Smart Homes is on the rise. The SESAME-S project (SEmantic SmArt Metering – Services for Energy Efficient Houses) uses semantically linked data to actively assist end-consumers in making well-informed decisions and controlling their energy consumption. By integrating smart metering and home automation functionality, SESAME-S works to effectively address the potential mass market of end-consumers with an easily customizable solution that can be widely implemented in domestic or business environments, with expected savings of over 20?% from the total energy bill. The developed system is a basis for conceptualizing, demonstrating, and evaluating a variety of innovative end-consumer services and their user interface paradigms. In this paper, we present the SESAME-S system as a whole and discuss the semantically enabled services, demonstrating that such systems may have broad acceptance in the future. The data obtained through such systems will be invaluable for future global energy-efficiency strategies and businesses.     

Effect of Copper on the Carrier Lifetime in Black Silicon

Black silicon is produced by laser annealing of a-Si:H films. During annealing, silicon microstructures are formed on the surface. We use time-resolved terahertz spectroscopy to study the photoconductivity dynamics in black silicon. We find that when a copper film is deposited on top of the a-Si:H layer prior to laser annealing, the carrier lifetime of black silicon is significantly reduced.     

Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.     

Effect of combining the equal-channel angular hydroextrusion,direct hydroextrusion and drawing on properties of copper wire

Effect of combined processing by the equal-channel angular hydroextrusion (ECAH), direct hydroextrusion (HE) and drawing (D) on properties of copper wire is discussed in the paper. The technique has been for the first time employed for hardening lengthy copper rods and wire and reaching the ultimate tensile strength σ = 686 MPa and the elongation to failure δ = 2% in the 0.5 mm diameter copper wire. These contrast with σ = 556 MPa and δ = 1.4% resulted from processing without ECAH. Electrical conductivity of the highest strength wire produced with ECAH and conductivity of a hardened wire produced without ECAH differ negligibly.     

DNA Antenna Tile‐Associated Deoxyribozyme Sensor with Improved Sensitivity

Some natural enzymes increase the rate of diffusion‐limited reactions by facilitating substrate flow to their active sites. Inspired by this natural phenomenon, we developed a strategy for efficient substrate delivery to a deoxyribozyme (DZ) catalytic sensor. This resulted in a three‐ to fourfold increase in sensitivity and up to a ninefold improvement in the detection limit. The reported strategy can be used to enhance catalytic efficiency of diffusion‐limited enzymes and to improve sensitivity of enzyme‐based biosensors.     

Heat Treatment and Chemical Composition of Fatty Acids and Rosin Acids Mixtures: Effects on Their Thermal Properties and Morphology

Mixtures of fatty acids and rosin acids are industrially important products utilized as a raw material for several purposes. Their thermal properties, especially cold stability and crystallization behavior is also important. Several fatty acid and rosin acid mixtures both from industrial products and from commercially available fatty and rosin acids were prepared and treated for 30 min at 80 °C under an inert atmosphere. Thereafter, the mixture was cooled to the desired temperature. Determination of the cloud point, chemical analysis of liquid and solid phase, thermal analysis by differential scanning calorimetry as well as morphology analysis by scanning electron microscopy were performed. The results revealed that crystallization was more rapid when it occurred at 10 °C compared to 25 °C. The crystal sizes increased with decreasing the crystallization temperature. Furthermore, crystals were of irregular shape and agglomerated when rapid cooling of the mixture occurred. Chemical analysis revealed that liquid phase was enriched with stearic acid, whereas crystals contained large amounts of abietic, dehydroabietic and linoleic acids. The cloud point of the mixtures increased with increasing amount of stearic and rosin acids. Dehydroabietic acid addition improved the cold stability of the synthetic fatty acid–rosin acids mixture.     

Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates: Pore Formation Mechanism

Fabrication of porous alginate hydrogels with a well‐controlled architecture useful for tissue engineering is still a challenge. Here, CaCO₃‐based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5–50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO₃ templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre‐encapsulated into CaCO₃ vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2%). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.     

Reactive,nonreactive, and flash spark plasma sintering of Al2O3/SiC composites—A comparative study

The influence of different SPS-based methods, that is, conventional spark plasma sintering (SPS), flash SPS (FSPS), and reactive SPS (RSPS) on the properties of Al₂O₃/SiC composite was investigated. It was shown that the application of preliminary high energy ball milling of the powders significantly enhances the sinterability of the ceramics. It was also demonstrated that FSPS provides unique conditions for rapid, that is, less than a minute, consolidation of refractory ceramics. The Al₂O₃-20 wt% SiC composite produced by FSPS possesses the highest relative density (~99%), fracture toughness (7.5 MPa m^1/2), hardness (20.3 GPa) and wear resistance among all ceramics produced by other SPS-based approaches with dwelling time 10 minutes. The RSPS ceramics hold the highest Young's modulus (390 GPa). Substitution of micron-sized Al₂O₃ particles by nano alumina does not lead to measurable enhancement of the mechanical properties.     

Local Accumulation of Lymphocytes in the Intima of Human Aorta Is Associated with Giant Multinucleated Endothelial Cells: Possible Explanation for Mosaicism of Atherosclerosis

Distribution of different types of atherosclerotic lesions in the arterial wall is not diffuse, but is characterized by mosaicism. The causes of such distribution remain to be established. At the early stages of atherogenesis, low-density lipoprotein (LDL) particles and immune cells penetrate into the intimal layer of the arterial wall through the endothelium. In adult humans, the luminal surface of the arterial wall is a heterogeneous monolayer of cells with varying morphology including typical endothelial cells (ECs) and multinucleated variant endothelial cells (MVECs). We hypothesized that distribution of MVECs in the endothelial monolayer can be related to the distribution pattern of early atherosclerotic lesions. We obtained en face preparations of intact adult (22–59 years old) aortic wall sections that allowed us to study the endothelial monolayer and the subendothelial layer. We compared the distribution of MVECs in the endothelial monolayer with the localization of early atherosclerotic lesions in the subendothelial layer, which were characterized by lipid accumulation and immune cell recruitment. In primary culture, MVECs demonstrated increased phagocytic activity compared to mononuclear ECs. Moreover, we have shown that unaffected aortic intima contained associates formed as a result of aggregation and/or fusion of LDL particles that are non-randomly distributed. This indicated that MVECs may be involved in the accumulation of LDL in the subendothelial layer through increased transcytosis. Interaction of LDL with subendothelial cells of human aorta in primary culture increased their adhesive properties toward circulating immune cells. Study of unaffected aortic intima revealed non-random distribution of leukocytes in the subendothelial layer and increased localization of CD45+ leukocytes in the subendothelial layer adjacent to MVECs. Together, our observations indicate that MVECs may be responsible for the distribution of atherosclerotic lesions in the arterial wall by participating in LDL internalization and immune cell recruitment.