Enhancement of mass transfer in a two-layer Taylor-Couette apparatus with axial flow

The effect of axial flow on the mass transfer through a liquid-liquid interface in a two-layer Taylor-Couette system is studied. The mass transfer of a passive scalar is driven by the diffusion through the boundary, enhanced by the convective mass transport due to the Taylor-Couette vortical flow, which is in turn affected by the axial pressure gradient. Numerical modeling shows that the axial flow obviates the symmetry of the distribution of the local Sherwood number, Sh, in a vortical cell and leads to decrease of its average counterpart. For better physical insight into this effect, simplified kinematic models of the phenomenon were considered. The numerical model shows at Sc=1 to 10 (Sc being the Schmidt number) that the mass transfer is enhanced by vortical flow in the regions where the motion is directed towards the interface. The axial throughflow makes for elongation of the Taylor vortices in the axial direction and reduces the area of the above regions, thereby increasing the local concentration gradient and reducing the mass transfer rate. Simplified analytical results for Sc?1 indicate redistribution of the mass flux over the interface compared with the case of Sc=1 to 10. The origin of this phenomenon is explained. It is also demonstrated that Sh scales as Pe^1/2 for the whole range of Sc, Pe being the Peclet number of the vortical motion.     

Change in physicomechanical properties of steel D1604AT15 during fatigue at different loading frequencies

Results are presented in a statistical arrangement for studying the effect of loading frequency on the fatigue life in bending of plates with a stress concentrator. The nature of change in microhardness, electrical conductivity, dislocation density, and block dimensions during fatigue at frequencies of 2.8, 8.8, and 18 kHz has been demonstrated. It has been established that in spite of some qualitative difference the main indicators of fatigue at these frequencies are retained.S. M. Kirov Belorussian Technology Institute, Minsk. Translated from Problemy Prochnosti, No. 10, pp. 31–34, October, 1989.     

多坐标系下目标跟踪的联合滤波

针对雷达目标观测和处理在不同的坐标系下完成，本文提出了联合滤波算法来跟踪机动目标。该算法以卡尔曼滤波器为基础，直角坐标系下和极坐标系下的算法相联合，不仅克服了两种坐标系下滤波算法的不足，而且对机动目标有很好的跟踪效果。仿真实验结果表明了该算法的有效性。     

Intermodality, retrospective image registration in the thorax

The purpose of this study was to develop an accurate, retrospectively applicable procedure for registering thoracic studies from different modalities in a short amount of time and with minimal operator intervention. METHODS: CT and PET studies were acquired from six patients. The pleural surfaces in both image sets were determined by segmenting based on 50% of the maximum soft-tissue value in the study. These surfaces were converted into three-dimensional volumes and used to register the CT and PET studies in three dimensions using a sum of least squares fitting approach. The registered PET study was then displayed in a hot metal scale overlayed on top of the gray scale CT study. The accuracy of the fit was evaluated through a phantom study and preliminary clinical evaluation. RESULTS: A phantom study was performed to determine the limits of this technique. The accuracy was determined to be less than 2.3 mm in the x and y direction and 3 mm in the z direction. Preliminary clinical evaluation was also performed with encouraging results. CONCLUSION: This technique accurately registers PET and CT images of the thorax, retrospectively, without the need for external fiducial markers or other a priori action.     

The effect of the EAAEAE insert on the property of human metallothionein-3

MT3 shows apparently different properties and function fromMT1 even though they have 70% sequence homology. Possibly thetwo inserts, Thr5 and a negatively charged hexapeptide at position-55in MT3, play important roles. A series of MT3 variants aroundthe EAAEAE hexapeptide have been prepared by site-directed mutagenesisand their properties and reactivity towards pH, EDTA and DTNBhave been studied. Our detailed studies revealed that the EAAEAEinsert is essential to the property of MT3. It is the hexapeptideinsert, to some extent, making the MT3     

聚酯新型催化剂乙二醇锑的工业应用

介绍了国产新型催化剂惭二醇锑在洛阳石油化工总厂聚酯装置上的使用情况，结果表明：乙二醇锑催化剂活性高、易溶解；以乙二醇锑催化剂合成的聚酯产品质量稳定，纺丝时的加工性能明显得到改善。     

Substantiation of the Radiochemical Characteristics of Liquid Radioactive Wastes That Determine Safe Operation of Deep Waste Disposal Sites

The qualitative and quantitative radiochemical composition of liquid wastes is substantiated. This makes possible further safe operation of deep waste disposal sites at the Mining-Chemical Plant and the Siberian Chemical Plant. The toxicity and temperature in a formation with the wastes removed are used as the assessment criteria, satisfaction of which guarantees that the wastes will remain localized within the assigned boundaries of the waste-disposal formation site. It is concluded that the standard limit should be imposed on the specific activity of the long-lived group of radionuclides – ⁹⁰Sr and ¹³⁷Cs – rather than on the total specific activity of the wastes placed in deep disposal sites. For maximum specific activity of ⁹⁰Sr and ¹³⁷Cs of 37 GBq/dm³ and total specific activity not exceeding 185 GBq/dm³ for buried wastes with radionuclide composition characteristic of modern radiochemical production operations, it is impossible for potentially dangerous radiation and thermochemical processes to occur in the waste-disposal formation site. The recommended limit permits reducing substantially the volume of buried wastes and therefore the region over which the wastes propagate in the deep disposal site.     

丙烯酸酯类助剂ACR的生产简况及市场分析

概述了ACR的功能、生产简况及市场趋势。     

Biophysical Model of Larval Yellow Perch Advection and Settlement in Lake Michigan

Potential for large-scale physical transport processes to affect recruitment of Lake Michigan yellow perch (Perca flavescens) was studied by examining the variation in larval distribution, growth rate, and settlement during June–August 1998–2003 using a 3D particle transport model linked with an individual-based bioenergetics growth model. In all years, virtual larvae were released nearshore in southwestern Lake Michigan, a known and important spawning region for yellow perch. For any given year, the same circulation pattern and water temperature either promoted or reduced yellow perch settlement depending on the consumption rates and settlement size chosen in the growth model. Increased consumption increased the number of settled larvae and expanded the total area where larvae settled, whereas increased settlement size reduced the number of settled larvae and reduced the overall settlement area. Interannual variability in circulation patterns and water temperature also resulted in contrasting larval settlement rates, settlement locations, and size of settlement areas between years. Model predictions were most consistent with field observations of age-0 yellow perch from Illinois and Michigan waters when settlement was assumed to occur at 50 mm. Moreover, our model suggests that larvae originating from southwestern Lake Michigan can recruit anywhere within the southern basin and even in the northern basin. Future model improvement will require information on the relative contribution of various sectors to the larval pool, their distribution with reference to the hydrodynamic landscape, the feeding and growth of yellow perch during their pelagic phase, and the size at transition to demersal stage.     

Analytical investigations of transitional operating modes of the second circuit of units at NPP with water-moderated reactors with consideration of control systems

A mathematical model for analysis of process parameters of equipment in the second circuit of nuclear power plants is presented, and the structure of the program and principles used for analysis of the equipment are described. A mathematical model for analysis of the deaerator and steam generator is described in detail. A computational analysis of several transitional modes, which is made possible on the basis of the mathematical model in question, is also presented in this paper, and a comparison is made with test data. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 16–22.