Fabrication of Copper Nanowire Films and their Incorporation into Polymer Matrices for Antibacterial and Marine Antifouling Applications

With the ban of tributyltin, copper‐based biocides are now widely used in antifouling coatings as the major active ingredients. Given the past experience of heavy‐metal accumulation in harbors with limited water exchange, there is a significant interest in developing copper materials that greatly reduce the amount of copper ions released into marine surroundings. In this paper, copper nanowires (NWs) encapsulated in polymer matrices are investigated as the means to control the release of copper ions and to achieve a long‐lasting antifouling effect. Very long CuNWs with high aspect ratio in organic solution are drop‐coated onto substrates to fabricate uniform thin films. They are then incorporated into an elastomeric polydimethylsiloxane (PDMS) matrix. A small amount of CuNWs in PDMS can inhibit barnacle cyprid settlement, while it exhibits low mortality to cyprids and nauplii present in the surrounding seawater environment. The low levels of copper released after 50 days suggest that the intersecting and interconnected CuNWs embedded in PDMS could potentially release copper ions continuously over a few years in seawater. This approach provides a novel platform to use hybrid materials as effective marine antifouling coatings, and may be applied to fouling release materials to enhance their antifouling properties.     

Technological aspects of flexible CIGS solar cells and modules

This paper describes the technological status of and some challenges in the manufacturing of Cu(In,Ga)Se₂ (CIGS)-based solar cells on flexible polymer and metal substrates. Substrate characteristics such as thermal expansion properties and stability, surface roughness, or substrate composition, strongly influence growth and properties of the following layers. For example, adhesion failure, cracking, or contamination by diffusion of impurities from the substrate may occur with some substrates. Aspects of (external) sodium incorporation into CIGS are discussed for high and low CIGS deposition temperature. Low-temperature deposition processes are particularly important when polyimide substrates are used. The electrical insulation of metal foils by dielectric barriers (e.g. SiO_x or Al₂O₃) allows the fabrication of monolithically integrated modules. A soft and selective patterning technique based on laser scribing and mask-free photolithography is described. Working modules as large as 20 cm × 30 cm were achieved with these methods.     

Sustained Increase in Serum Glial Fibrillary Acidic Protein after First ST-Elevation Myocardial Infarction

Acute ischemic cardiac injury predisposes one to cognitive impairment, dementia, and depression. Pathophysiologically, recent positron emission tomography data suggest astroglial activation after experimental myocardial infarction (MI). We analyzed peripheral surrogate markers of glial (and neuronal) damage serially within 12 months after the first ST-elevation MI (STEMI). Serum levels of glial fibrillary acidic protein (GFAP) and neurofilament light chain (NfL) were quantified using ultra-sensitive molecular immunoassays. Sufficient biomaterial was available from 45 STEMI patients (aged 28 to 78 years, median 56 years, 11% female). The median (quartiles) of GFAP was 63.8 (47.0, 89.9) pg/mL and of NfL 10.6 (7.2, 14.8) pg/mL at study entry 0–4 days after STEMI. GFAP after STEMI increased in the first 3 months, with a median change of +7.8 (0.4, 19.4) pg/mL (p = 0.007). It remained elevated without further relevant increases after 6 months (+11.7 (0.6, 23.5) pg/mL; p = 0.015), and 12 months (+10.3 (1.5, 22.7) pg/mL; p = 0.010) compared to the baseline. Larger relative infarction size was associated with a higher increase in GFAP (ρ = 0.41; p = 0.009). In contrast, NfL remained unaltered in the course of one year. Our findings support the idea of central nervous system involvement after MI, with GFAP as a potential peripheral biomarker of chronic glial damage as one pathophysiologic pathway.     

Comments on “Necessary and sufficient stability condition of fractional-order interval linear systems” [Automatica 44 (2008), 2985–2988]

This paper shows that the main thesis of the article “Necessary and sufficient stability condition of fractional-order interval linear systems” by Ahn and Chen (Automatica, vol. 44, pp. 2985–2988) is only a sufficient (and not a necessary) condition for the robust stability of fractional-order linear systems.     

River, reservoir and lake sediment contamination by heavy metals downstream from urban areas of Switzerland

This paper quantifies sediment contamination by heavy metals in four reservoirs and one lake located downstream from major urban areas in Switzerland. The waterbodies include the Wettingen Reservoir (located on the Limmat River downstream from Zürich), the Klingnau Reservoir (on the lower Aare River), the Wohlen Reservoir (downstream from Berne), the Verbois Reservoir (downstream from Geneva) and Vidy Bay (Lake Geneva, city of Lausanne). For all sediment cores and contaminants, a trend is observed from high contaminant values in the lower part of the cores, decreasing to lower concentrations in the upper part of the cores. However, for each site and each element, specific features are recognized. Applying the criteria of the Swiss ordinance on soil protection, all sediment cores must be classified as contaminated by one or more contaminants and at variable levels. From these data, it is concluded that: reservoirs and lakes located downstream from major urban centres in Switzerland have accumulated significant volumes of contaminated sediments in the past, representing the largest, but not the most intensely, contaminated sites on a national scale; the main environmental risk is remobilization of the contaminants and their return to the food chain, particularly by infiltration into the groundwater; and although the processes of remobilization are identified, the conditions of occurrence and the amplitude of the processes are still poorly known. Different options of reservoir and lake sediment management also are discussed and further research topics defined.     

Using Parallel Packed Bed within a High Temperature Thermal Energy Storage System for CSP-Plants

In order to optimize the electricity yield of CSP （concentrated solar power） plants, TES （thermal energy storage） systems are regarded as an essential component. Furthermore, for many electricity grid operators, it is important to have spinning reserves in the grid and dispatchable power available, both offered by CSP-plants with integrated thermal energy storage. Enolcon is developing a new TES-system since several years. The system itself was designed to offer a principle simple and robust setup （with regard to execution and operation） and which is reducing the electricity costs of CSP-power plants by the consequent use of state of the art technology. Furthermore, such system shall be open to future developments of CSP-systems with regard to increasing steam temperatures and steam pressure. Such TES-system shall be commercially available for large scale application already in year 2014/2015. The key elements of the enolcon-TES are the open cycle using always ambient air with an air-air-heat exchanger and the arrangement of the storage material in such way to minimize the pressure losses and the own electricity consumption. The development is progressing in a structured way by studies, engineering works, TES-pilot plants, isothermal air flow test plant for the verification of the CFD-calculations, and since end of 2012 by the operation of a high temperature TES-module with all features of the large scale modules.     

Is it only CO2 that matters? A life cycle perspective on shallow geothermal systems

Shallow geothermal systems such as open and closed geothermal heat pump (GHP) systems are considered to be an efficient and renewable energy technology for cooling and heating of buildings and other facilities. The numbers of installed ground source heat pump (GSHP) systems, for example, is continuously increasing worldwide. The objective of the current study is not only to discuss the net energy consumption and greenhouse gas (GHG) emissions or savings by GHP operation, but also to fully examine environmental burdens and benefits related to applications of such shallow geothermal systems by employing a state-of the-art life cycle assessment (LCA). The latter enables us to assess the entire energy flows and resources use for any product or service that is involved in the life cycle of such a technology. The applied life cycle impact assessment methodology (ReCiPe 2008) shows the relative contributions of resources depletion (34%), human health (43%) and ecosystem quality (23%) of such GSHP systems to the overall environmental damage. Climate change, as one impact category among 18 others, contributes 55.4% to the total environmental impacts. The life cycle impact assessment also demonstrates that the supplied electricity for the operation of the heat pump is the primary contributor to the environmental impact of GSHP systems, followed by the heat pump refrigerant, production of the heat pump, transport, heat carrier liquid, borehole and borehole heat exchanger (BHE). GHG emissions related to the use of such GSHP systems are carefully reviewed; an average of 63 t CO₂ equivalent emissions is calculated for a life cycle of 20 years using the Continental European electricity mix with 0.599 kg CO₂ eq/kWh. However, resulting CO₂ eq savings for Europe, which are between ?31% and 88% in comparison to conventional heating systems such as oil fired boilers and gas furnaces, largely depend on the primary resource of the supplied electricity for the heat pump, the climatic conditions and the inclusion of passive cooling capabilities. Factors such as degradation of coefficient of performance, as well as total leakage of the heat carrier fluid into the soil and aquifer are also carefully assessed, but show only minor environmental impacts.