Nuclear magnetic resonance characterization of high- and ultrahigh-performance concrete: Application to the study of water leaching

In the present study, we show that high-resolution ²⁹Si and ²⁷Al magic angle spinning (MAS) nuclear magnetic resonance (NMR) can be a powerful tool for analyzing actual concrete mixes. The influence of the amount of silica fume and of the type of cement in high-performance concrete (HPC), as well as the influence of the type of silica fume and of the granular packing in ultrahigh-performance concrete (UHPC) were investigated. Significant effects on the amount and shape of C-S-H, on the incorporation of aluminum in the C-S-H structure, and on the distribution of aluminum-containing hydrates were observed. Nuclear magnetic relaxation of protons was also performed and it showed the fractal feature of the pore size distribution in UHPC and the higher amount of larger pores in HPC. The microstructure of the surface of these same formulations leached by mineral water for up to 1 year exhibits slight modifications.     

One Question,Multiple Answers: Biochemical and Biophysical Screening Methods Retrieve Deviating Fragment Hit Lists

Fragment‐based lead discovery is gaining momentum in drug development. Typically, a hierarchical cascade of several screening techniques is consulted to identify fragment hits which are then analyzed by crystallography. Because crystal structures with bound fragments are essential for the subsequent hit‐to‐lead‐to‐drug optimization, the screening process should distinguish reliably between binders and non‐binders. We therefore investigated whether different screening methods would reveal similar collections of putative binders. First we used a biochemical assay to identify fragments that bind to endothiapepsin, a surrogate for disease‐relevant aspartic proteases. In a comprehensive screening approach, we then evaluated our 361‐entry library by using a reporter‐displacement assay, saturation‐transfer difference NMR, native mass spectrometry, thermophoresis, and a thermal shift assay. While the combined results of these screening methods retrieve 10 of the 11 crystal structures originally predicted by the biochemical assay, the mutual overlap of individual hit lists is surprisingly low, highlighting that each technique operates on different biophysical principles and conditions.     

Protein Engineering of the Progesterone Hydroxylating P450‐Monooxygenase CYP17A1 Alters Its Regioselectivity

The CYP171 enzyme is known to catalyse a key step in the steroidogenesis of mammals. The substrates progesterone and pregnenolone are first hydroxylated at the C17 position, and this is followed by cleavage of the C17?C20 bond to yield important precursors for glucosteroids and androgens. In this study, we focused on the reaction of the bovine CYP17A1 enzyme with progesterone as a substrate. On the basis of a created homology model, active‐site residues were identified and systematically mutated to alanine. In whole‐cell biotransformations, the importance of the N202, R239, G297 and E305 residues for substrate conversion was confirmed. Additionally, mutation of the L206, V366 and V483 residues enhanced the formation of the 16α‐hydroxyprogesterone side product up to 40 % of the total product formation. Furthermore, residue L105 was found not to be involved in this side activity, which contradicts a previous study with the human enzyme.     

Druids' Knowledge in Chemical Engineering: Analysis of the Illustrated Literature by Goscinny and Uderzo

The illustrated literature series Asterix (and Obelix) is commonly known as entertainment and distraction, but behind that mask, case studies for chemical production in small medium enterprises and the crucial role of research and development can be discovered. The series rightly puts chemistry and chemical engineering at the heart of success and prosperity. Overall, the motives exemplified are of high relevance today for chemical industry.     

Molecular Cross‐Talk between Nonribosomal Peptide Synthetase Carrier Proteins and Unstructured Linker Regions

Nonribosomal peptide synthetases (NRPSs) employ multiple domains separated by linker regions to incorporate substrates into natural products. During synthesis, substrates are covalently tethered to carrier proteins that translocate between catalytic partner domains. The molecular parameters that govern translocation and associated linker remodeling remain unknown. Here, we used NMR to characterize the structure, dynamics, and invisible states of a peptidyl carrier protein flanked by its linkers. We showed that the N‐terminal linker stabilizes and interacts with the protein core while modulating dynamics at specific sites involved in post‐translational modifications and/or domain interactions. The results detail the molecular communication between peptidyl carrier proteins and their linkers and could guide efforts in engineering NRPSs to obtain new pharmaceuticals.     

Microstructural characterization of creep anisotropy at 673 K in the M5® alloy

Zirconium alloy tubing is used in pressurized water nuclear reactors in order to prevent fissile material from leaking into the coolant. It can be the first safety wall of nuclear fuel, and is submitted to complex thermomechanical loadings. In consequence, new Nb-modified alloys, such as the M5® alloy, and fine numerical models are being developed to guarantee a better and longer mechanical integrity of these tubes. To identify the physical mechanisms that could be considered in such models, an experimental approach, combining creep tests with electron backscattered diffraction and Transmission electron microscopy investigations, was carried out.Tubular specimens were submitted to multiaxial creep tests at a temperature of 673 K. Seven ratios between the axial and hoop applied stresses were investigated. It enabled a macroscopic evidence of the creep anisotropy. Besides, EBSD analyses on a mesoscopic-sized non deformed area led to the characterization of the variation of the average Schmid factor with the direction of loading. Finally, TEM observations were done on seven crept samples, corresponding to the seven directions of loading tested mechanically. The variations of the different parameters investigated (activated slip systems, dislocation densities, curvatures of the dislocations) can be seen as the effects of the creep anisotropy at a microscopic scale. The correlation between results is then discussed in a multiscale frame.     

Treatment of olive mill washing water by ultrafiltration

Olive oil production requires important quantities of washing water containing low oil concentrations, but classical processes used to recover or to eliminate this oil are ineffective. This study presents a membrane technique to treat olive oil mill washing water using different commercial ultrafiltration membranes: one organic (PCI) and two ceramic (Ceraver) membranes. The influence of the hydrodynamic parameters (transmembrane pressure and flow rate) and the cut‐off membranes on the efficiency of the ultrafiltration process was evaluated, and it was shown the organic PCI membrane could reduce pollution due to organic matter by decreasing the value of the Chemical oxygen demand by about 90%. Moreover, the nature of the ultrafine pore membrane appeared to be an important parameter which may strongly increase or decrease the capacity of the membrane. The membrane cut‐off did not have a strong influence on the performance of the process but if the membrane pores were too large the stability of the dynamically formed membrane decreased at transmembrane pressures greater than 0.2 MPa.     

Potential influence of microorganisms on the corrosion of carbon steel in the French high- and intermediate-level long-lived radioactive waste disposal context

In the context of the high-level radioactive waste disposal CIGEO, the corrosion rate due to microbially influenced corrosion (MIC) has to be evaluated. In France, it is envisaged to dispose of high- and intermediate-level long-lived radioactive waste at a depth of 500 m in a deep geological disposal, drilled in the Callovo-Oxfordian claystone (Cox) formation. To do so, a carbon steel casing will be inserted inside disposal cells, which are horizontal tunnels drilled in the Cox. A specific cement grout will be injected between the carbon steel casing and the claystone. A study was conducted to evaluate the possibility of MIC on carbon steel in the foreseeable high radioactive waste disposal. The corrosiveness of various environments was investigated at 50°C and 80°C with or without microorganisms enriched from samples of Andra's underground research laboratory. The monitoring of corrosion during the experiments was ensured using gravimetric method and real-time corrosion monitoring using sensors based on the measurements of the electrical resistance. The corrosion data were completed with microbiological analyses including cultural and molecular characterizations.     

Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

The Study of a 231 French Patient Cohort Significantly Extends the Mutational Spectrum of the Two Major Usher Genes MYO7A and USH2A

Usher syndrome is an autosomal recessive disorder characterized by congenital hearing loss combined with retinitis pigmentosa, and in some cases, vestibular areflexia. Three clinical subtypes are distinguished, and MYO7A and USH2A represent the two major causal genes involved in Usher type I, the most severe form, and type II, the most frequent form, respectively. Massively parallel sequencing was performed on a cohort of patients in the context of a molecular diagnosis to confirm clinical suspicion of Usher syndrome. We report here 231 pathogenic MYO7A and USH2A genotypes identified in 73 Usher type I and 158 Usher type II patients. Furthermore, we present the ACMG classification of the variants, which comprise all types. Among them, 68 have not been previously reported in the literature, including 12 missense and 16 splice variants. We also report a new deep intronic variant in USH2A. Despite the important number of molecular studies published on these two genes, we show that during the course of routine genetic diagnosis, undescribed variants continue to be identified at a high rate. This is particularly pertinent in the current era, where therapeutic strategies based on DNA or RNA technologies are being developed.