Flood Hazards

The phenomenon of virtual space is fundamental to the way human beings relate perceptually, behaviorally, and existentially to their world. Virtuality is the presence of what is not literally present, and it thus enables the immanence of building to be annealed to the past and future, analogous form, and hypothetical possibility. In sum, virtuality is synonymous with “architecture” proper, as opposed to building simple. Through the use of gesture, the non-present is made present and given a secret status ruled by a non-classical or “grotesque” order. The principle of our access to the virtual is based on the act of reading, where the movement from the actual to the virtual is simultaneously a spatial and a philosophical transformation. Reading is not simply the translation of phonetic or iconographic characters into their linguistic equivalents, but a restructuring of the space of appearance. The origins and evolution of this “space of reading” are characterized by a distinctive architecture, and the architecture of inhabitable spaces is conditioned by this distinctive architecture: the architecture of reading is the means of reading architecture.     

Covariance‐based hardware selection part IV: Solution using the generalized benders decomposition

Recently the covariance based hardware selection problem has been shown to be of the mixed integer convex programming (MICP) class. While such a formulation provides a route to global optimality, use of the branch and bound search procedure has limited application to fairly small systems. The particular bottleneck is that during each iteration of the branch and bound search, a fairly slow semi‐definite programming (SDP) problem must be solved to its global optimum. In this work, we illustrate that a simple reformulation of the MICP and subsequent application of the generalized Benders decomposition algorithm will result in massive reductions in computational effort. While the resulting algorithm must solve multiple mixed integer linear programs, this increase in computational effort is significantly outweighed by the reduction in the number of SDP problems that must be solved. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3628–3638, 2016     

Role of salt on adhesion of an epoxy/aluminum (oxide) interface in aqueous environments

Joints held by polymeric adhesives are commonplace in many engineered products, but normal service can require exposure to environmental conditions that present a significant challenge for maintaining the structural integrity of the interface. In particular, aqueous environments can wreak havoc on the joint strength. Here, a mechanistic approach is used to understand the difference in the debonding behavior of an epoxy/aluminum (oxide) interface when exposed to deionized (DI) water and aqueous sodium chloride by correlating macroscopic failure with the sorption of salt and water into the adhesive and its nanoscale distribution. For the epoxy‐aluminum system examined here, the presence of sodium chloride increases the resistance to crack growth in comparison to DI water. The debonding appears to be controlled by water near the buried interface. Salt water decreases the solubility of water in the epoxy and decreases the concentration of water near the buried interface, but the concentration of salt that enters the epoxy is below the detection limit. Thus, even if ions cannot penetrate or sorb into the adhesive, the presence of salt can significantly alter the water distribution within the adhesive and ultimately the strength of the joint. POLYM. ENG. SCI., 56:18–26, 2016. © 2015 Society of Plastics Engineers     

Response of real-time black carbon mass instruments to mini-CAST soot

Soot is a climate forcer and a dangerous air pollutant that has been increasingly regulated. In aviation, regulatory measurements of soot mass concentration in the exhaust of aircraft turbine engines are to be based on measurements of black carbon (BC) calibrated to elemental carbon (EC) content of diffusion flame soot. The calibration soot must currently meet only one criterion: minimum EC to total carbon (TC) ratio of 0.8. However, not including soot properties other than the EC/TC ratio may potentially lead to discrepancies between different BC measurements. We studied the response of two instruments, the AVL Micro-Soot Sensor (MSS) and the Artium Laser-Induced Incandescence 300 (LII), to soot from two miniature combustion aerosol standard (mini-CAST) burners. By changing the air-fuel ratio, premixing nitrogen into the fuel, and using a catalytic stripper to remove volatile compounds, we produced a wide range of particle morphologies and EC contents. As the EC content decreased, both the instruments underreported the EC mass, but the LII diverged more severely. Upon closer investigation of eight conditions with EC/TC > 0.8, the LII underreporting was found independent of primary particle size, but increased with decreasing geometric mean diameter of the soot agglomerates. As the geometric mean diameter decreased from 160 nm to 50 nm, the differences between the LII and MSS increased from 15% to 50%. The results suggest that in addition to EC content, calibration procedures for the regulatory BC measurements may need to take particle size distributions into account.

© 2016 American Association for Aerosol Research     

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.

     

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Conversion and free volume

Thermal rearrangement of polyimides with ortho-position groups to polybenzoxazoles and related structures has been of recent interest for producing gas separation membranes. This study explores the influence of synthesis route and ortho-position functional group on the thermal rearrangement process and the fractional free volume of thermally rearranged (TR) polymers produced from polyimides derived from 3,3′-dihydroxy-4,4′-diamino-biphenyl and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (HAB–6FDA). Acetate, propanoate, and pivalate ortho-position functional groups were considered. Thermogravimetric analysis (TGA) was used to study thermal rearrangement at temperatures between 350 and 450 °C, and evolved gases from TGA were analyzed via mass spectrometry to characterize the byproducts of thermal rearrangement and thermal degradation. CO₂ was the major byproduct of thermal rearrangement for all samples, and its evolution began well before the onset of thermal degradation. When non-hydroxyl ortho-position groups were present in the polymers, several byproducts other than CO₂ were also observed due to the loss of these ortho-position groups before thermal rearrangement. Free volume generally increased with increasing extent of thermal rearrangement, but precise values of free volume could not be accurately determined for polymers with propanoate and pivalate ortho-position functional groups due to uncertainties in the chemical structure of partially converted materials. For polymers with acetate and hydroxyl ortho-position groups, free volume could be determined within the uncertainty of density measurements. Thermal rearrangement behavior and free volume results for acetate containing polymers synthesized via different routes were very similar. Based on these results, the chemical structure of the ortho-position functional group has a larger impact on TR polymer properties than the polyimide precursor synthesis route.     

Cuticular Extracts from Acromis sparsa (Coleoptera: Cassidinae) Mediate Arrestment Behavior of the Commensal Canestriniid Mite Grandiella rugosita

Astigmatid mites in the family Canestriniidae are often closely associated with tortoise leaf beetles (Chrysomelidae: Cassidinae). For example, the survival of the commensal canestriniid mite Grandiella rugosita depends on dispersal to the cassidine beetle Acromis sparsa. Here, we tested whether the beetle cuticle provides chemical cues for host recognition for G. rugosita. In two-choice assays with cuticular extracts from A. sparsa and the co-occurring, non-host cassidine Chelymorpha alternans offered simultaneously, mites clearly preferred the area treated with extract from their host. In no-choice assays, G. rugosita spent three times longer and moved three times slower on host cuticular extracts compared to non-host extracts and the solvent control. Analyses of the chemical composition of cuticular extracts from males and females of A. sparsa and C. alternans revealed complex mixtures of mainly methyl branched hydrocarbons, which clearly separated both species in a principal component analysis. We found no qualitative difference between males and females of either species, but in C. alternans quantitative differences between males and females were detected. Our results demonstrate that G. rugosita is able to discriminate between cuticular extracts from its host A. sparsa and the non-host C. alternans. The components eliciting the observed arrestment behavior remain to be determined.     

Catalytic combustion for industrial gas turbines

This brief review provides a general account of work directed at the use of catalytic combustion in gas turbine engines. A major potential advantage of using catalytic combustion is that the fuel can be burnt efficiently at temperatures low enough (< 1500°C) to avoid significant oxidation of atmospheric nitrogen. This advantage was less important when catalytic combustion was demonstrated in the 1970s than it is today and received relatively little attention until the following decade. After discussion of the principles involved in the design of a combustor that must meet the mixing, size, performance and durability goals of a based gas turbine application, the review turns to accounts of experiments conducted on a laboratory scale with simple configurations. These established basic operating parameters for satisfactory combustion performance and led to larger scale work and to prototype design concepts for industrial gas turbines in the late 70s and early 80s. Test results were encouraging but were not pursued definitively in the U.S.A. Activity continued at several centres in Japan, with exploration of a number of different catalyst arrangements, geometries, and control systems, again with encouraging results. At the same time, there has been renewed interests in the U.S.A. and in Europe, spurred largely by the emphasis on reducing emissions of nitrogen oxides (NOx). The paper concludes with suggestions for further development of catalytically stabilized combustion systems for gas turbines. These systems must ensure adequate pre-catalyst temperature, with evenly premixed fuel and air, and sufficient temperature rise across the catalyst to ensure effective completion of reaction in a homogeneous reaction mode. The outstanding problems are largely concerned with questions of catalyst integrity and longevity in practical configurations and realistic engine operating conditions.