环境中氚和碳-14

本文介绍了加拿大恰克河实验室有关氚和碳－14在环境中行为和评价的研究。     

Theory and design of a tapered line distributed photodetector

We present the theory and design of a tapered line distributed photodetector (TLDP). In the previously demonstrated velocity-matched distributed photodetector (VMDP), high electrical bandwidth is achieved by proper termination in the input end to absorb reverse traveling waves, sacrificing one-half of the quantum efficiency. By utilizing the tapered line structure and phase matching between optical waves and microwaves in our analyzed structure, a traveling-wave photodetector is more realizable and ultrahigh bandwidth can be attained due to removal of the extra input dummy load that sacrifices one-half of the total quantum efficiency. To investigate the advantages of TLDP over VMDP, we calculate their electrical bandwidth performances by using an analytic photodistributed current model. We adopted low-temperature-grown (LTG) GaAs-based metal-semiconductor-metal (MSM) traveling-wave photodetectors as example unit active devices in the analytic bandwidth calculation for their high-speed and high-power performances. Both VMDP and TLDP in our simulation are assumed to be transferred onto glass substrates, which would achieve high microwave velocity/impedance and make radiation loss negligible. The simulated bandwidth of a properly designed LTG GaAs MSM TLDP is /spl sim/325 GHz, which is higher than the simulated bandwidth of the LTG GaAs MSM VMDP with an open-circuit input end (/spl sim/240 GHz) and is almost comparable to the simulated bandwidth of an input-terminated LTG GaAs MSM VMDP (/spl sim/330 GHz). This proposed method can be applied to the design of high-bandwidth distributed photodetectors for radio-frequency photonic systems and optoelectronic generation of high-power microwaves and millimeter waves.     

由光率体求导折射率及振动方向的新方法

从光率体出发，利用坐标轴旋转，导出了光在晶体中传播时折射率及振动方向的公式。     

吐丝圈径对大规格高碳盘条组织性能的影响

计算与分析了斯太尔摩冷线上盘条的吐丝圈径、搭接密度及"佳灵"装置横向布风曲线之间的关系,研究了吐丝圈径的大小对大规格82B盘条组织和性能的影响,确定了大规格82B盘条最小吐丝圈径应为980mm.     

The organisational learning effects of management accounting information under advanced manufacturing technology

This study empirically examined the organisational learning effects of the nonfinancial performance information provided by management accounting information systems (MAISs) under advanced manufacturing technology (AMT). In this study, a target costing system and the frequent and quick reporting of information were considered the facilitators of learning. First, we examined the relationships between AMT level and the amount of nonfinancial performance information produced by MAISs. The empirical results showed that there are significant positive relationships between the level of AMT and nonfinancial performance information. With a systems approach, we also proved the impact of the relationships among AMT levels, nonfinancial performance information and learning facilitators on the organisational performance of a firm. The results of our research suggest that under a high level of AMT, for the provision of information to result in an increase of performance through organisational learning, a target costing system must be introduced and a large amount of information should be provided frequently and quickly. The results of this study also showed that although AMT level may be low, fairly well-arranged facilitators and a moderately large amount of information may be necessary for the improvement of performance. In conclusion, effective organisational learning depends on the provision of relevant information as well as efficient learning support mechanisms.     

网络化制造中基于STEP-NC的编程方法

STEP-NC是由欧美提出的新的数控接口标准，目的是取代旧的数控标准ISO6983。本文首先分析了STEP-NC的两种应用标准：ISO14649（ARM）和STEPAP238（AIM），并且分析了Part21和Part28的应用领域及Part21文件格式和其中的信息产生方法。然後介绍了ST-Developer环境下ROSEC＋＋颠库编程接口及其应用程序的早、晚编联方式，并且以此为基础设计了整个程序的编程流程，重点介绍了工艺规划设计。最后给出了在C＋＋编程环境下利用ROSE库函数写入形成STEP AP238文件的方法。     

Interface characteristics and mechanical properties of carbon fibre reinforced copper composites

Interface characteristics of carbon fibre reinforced copper matrix composites materials with various interface states and their effect on the flexural strength of composites have been studied. Interfacial states are mechanical bonding, dissolution bonding and reaction bonding. To a certain extent, raising the interfacial strength enables an increase in the flexural strength due to prevention of carbon fibre being pulled out under low stress during fracture process of composites. Raising the interfacial bondage strength, causes the brittleness of composites to increase; the fracture surface of composites is converted from a fibre pull-out model to a fibre even model. While strengthening the interface bondage, the extent of chemical reaction and dissolution at the interface must be controlled to avoid degrading the carbon fibre.     

Automatic conversion from lexical words to prosodic words for mandarin text-to-speech system

In real speech, not like lexical words (LWs), prosodic words (PWs) are basic rhythmic units. The naturalness of a Text-to-Speech (TTS) system is directly influenced by the segmentation of the PWs. Most of the PWs are the combination of several LWs. In this paper, three Lexical Combination Models are proposed to combine LWs into PWs, including a Directed Acyclic Graph Model, a Segmentation Model and a Markov Model (MM). To cope with the situation where some long LWs should be segmented into two or more PWs, a Lexical Split Model (LSM) is applied to the long LWs. Experimental results prove that relatively constant results with various training data can be obtained from a MM. The Transformation-Based Error Driven Learning (TBED) algorithm, for its high performance of individual property, is applied in combination with the MM to improve the precision of PW segmentation. Experiments show that among the three proposed models, the MM combined with TBED and LSM, leads to the best performance, in which a precision of 93.00% and a recall of 93.23% are achieved. The perception test indicates that by using PWs as the lowest prosodic units a speech sounds more natural and acceptable than by using LWs. This paper is supported by NSFC Project (60503071); 973 Natural Basic Research Program of China (2004CB318102); Postdoctor Science Foundation of P. R. China (20070420275).     

Critical Configurations for 1-View in Projections from ℙ<Superscript>k</Superscript> → ℙ<Superscript>2</Superscript>

In this paper we describe, from a theoretical point of view, critical configurations for the projective reconstruction of a set of points, for a single view, i.e. for calibration of a camera, in the case of projections from ℙ^k to ℙ² for k ≥ 4. We give first a general result describing these critical loci in ℙ^k, which, if irreducible, are algebraic varieties of dimension k−2 and degree 3. If k=4 they can be either a smooth ruled surface or a cone and if k = 5 they can be a smooth three dimensional variety, ruled in planes, or a cone. If k≥ 6, the variety is always a cone, the vertex of which has dimension at least k − 6. The reducible cases are studied in Appendix A. These results are then applied to determine explicitly the critical loci for the projections from ℙ^k which arise from the dynamic scenes in ℙ³ considered in [13]. Marina Bertolini is currently Associate Professor of Geometry at the Department of Mathematics at the Università degli Studi di Milano, Italy. Her main field of research is Complex Projective Algebraic Geometry, with particular interest for the classification of projective varieties and for the geometry of Grassmann varieties. On these topics M. Bertolini has published more than twenty reviewed papers on national and international journals. She has been for some years now interested also in applications of Algebraic Geometry to Computer Vision problems. Cristina Turrini is Associate Professor of Geometry at the Department of Mathematics of Università degli Studi di Milano, Italy. Her main research interest is Complex Projective Algebraic Geometry: subvarieties of Grassmannians, special varieties, automorphisms, classification. In the last two years she has started to work on applications of Algebraic Geometry to problems of Computer Vision. She is author or co-author of about thirty reviewed papers. She is also involved in popularization of Mathematics, and on this subject she is co-editor of some books.