基于Web环境下的OLP技术的研究和实现

论述了当前基于C/S结构的OLAP系统在体系结构上的不足之处,认为解决方法是使用三层结构.在讨论了WebEB环境下对数据库进行操作的的各种技术的特点后,分析了作者设计和实现的一个基于Web环境的OLAP查询工具EASYQUERY.     

转炉钢渣处理技术的开发和应用

经一年来的生产实践表明,本钢研发的转轮式钢渣水淬处理方法安全可靠,钢渣处理效率高达8t／min,钢渣分离度好,工艺布置紧凑,主体设备结构简单,占地面积小,钢渣粒化液压倾翻渣罐速度可调,粒化周期可控范围大,时间在5～15min内,水淬后的钢渣粒度均匀,小于5mm的比例达95％以上,有利于钢渣的进一步应用。     

连续波雷达中对较大加速度的一种估计方法

在连续波雷达信号事后处理过程中,当目标的加速度比较大、信噪比又比较低时,各种算法很难处理出正确的结果。而目标的径向加速度是一个非常关键的参数。对它的成功的估计是后续处理中得到目标速度与距离的一个重要前提。本文针对这种情况,对连续波雷达回波频谱幅度产生原因进行分析,提出了二次曲线拟合频谱幅度来估计加速度的方法。仿真证明该方法的有效性。     

Direct Friction Welding of TiAl Alloy to 42CrMo Steel Rods

The effect of post-weld heat treatment (PWHT) on the mechanical properties and microstructure of direct friction-welded joint between TiAl alloy and 42CrMo steel rods was investigated in this paper. It was found that solid joint between TiAl alloy and 42CrMo steel could be obtained without adding interlayer. After PWHT at 580°C for 2 h, the tensile strength of the joint reached 405 MPa, and fracture happened through the TiAl alloy substrate with quasi-cleavage features. The tempered sorbite formed near the interface, improving the joint strength significantly. It was found that TiFe₂, TiAl, and small amount of TiC brittle phases formed at the interface, and the interfacial layer was as thin as 2–5 µm. The precipitated phases were 1 µm in average size, and distributed discontinuously at the interface.     

超声波倒车雷达中电荷放大器的分析与选择

为了提高超声波倒车雷达系统的量程及灵敏度,提出利用PROTEL软件对电荷放大器进行仿真选型.今对常见的LM2904、OP07、LF356和LF357_NSC四种不同性能的运算放大器所组成的电荷放大电路的性能进行分析及仿真,得出了适合本应用的电荷放大电路.实验数据表明,本电路的实际测量距离能达到6m,误差为0.6%.     

基于MM-EMD的改进HHT及应用

针对传统Hilbert-Huang变换假设"信号由IMF(Instinct Mode Functions)分量与普通趋势项构成"这一固有局限,根据油压信号的自身特点,提出了基于MM-EMD(Mathematical morphology and Empirical Mode Decomposition)的Hilbert-Huang变换改进方法,并将其应用于油压信号分析处理中。该方法的基本思想如下:针对存在非IMF、非普通趋势项分量的信号,先用数学形态滤波器分离出该分量,再对剩余信号进行EMD分解与Hilbert谱分析。仿真信号与实测信号表明,新方法能取得比传统Hilbert-Huang变换更好的分析效果。     

电荷放大器可靠性分析

介绍了电荷放大器在存储测试系统中的作用,详细说明了电荷放大器工作原理,推导出电荷量与输出电压之间的关系。通过故障树的方法对电荷放大器的可靠性进行分析,得出电荷放大器的MTBF和可靠性曲线,定量计算出电阻、电容、焊点和芯片在一个完整的存储测试电路中的失效率,定性的分析出不同部分对整体系统失效率的影响度。     

Multi‐modal brain tumor image segmentation based on SDAE

Accurate tumor segmentation has the ability to provide doctors with a basis for surgical planning. Moreover, brain tumor segmentation needs to extract different tumor tissues (Edema, tumor, tumor enhancement, and necrosis) from normal tissues which is a big challenge because tumor structures vary considerably across patients in terms of size, extension, and localization. In this article, we evaluate a fully automated method for segmenting brain tumor images from multi‐modal magnetic resonance imaging volumes based on stacked de‐noising auto‐encoders (SDAEs). Specially, we adopted multi‐modality information from T1, T1c, T2, and Flair images, respectively. We extracted gray level patches from different modalities as the input of the SDAE. After trained by the SDAE, the raw network parameters will be obtained, which are adopted as a parameter of the feed forward neural network for classification. A simple post‐processing is implemented by threshold segmentation method to generate a mask to get the final segmentation result. By evaluating the proposed method on the BRATS 2015, it can be proven that our method obtains the better performance than other state‐of‐the‐art counterpart methods. And a preliminary dice score of 0.86 for whole tumor segmentation has been achieved.     

Biomimetic Engineering of a Scavenger‐Free Nitric Oxide‐Generating/Delivering System to Enhance Radiation Therapy

Nitric oxide (NO) is a potent tumor‐cell radiosensitizer but it can be readily scavenged by hemoglobin (Hb) in vivo. A biomimetic incubator that can generate and deliver NO in a scavenger (Hb)‐free environment to enhance its radiosensitizing effect to maximize its efficacy in radiotherapy is proposed. This NO incubator comprises a poly(lactic‐co‐glycolic acid) (PLGA) hollow microsphere (HM) that contains an NO donor (NONOate) and a surfactant molecule (sodium caprate, SC) in its aqueous core. In acidic tumorous environments, the PLGA shell of the HM allows the penetration of protons from the outside, activating the hydrolytic cleavage of NONOate, spontaneously generating NO bubbles, which are immediately trapped/stabilized by SC. The SC‐stabilized NO bubbles in the HM are then squeezed through the spaces of its PLGA matrices by the elevated internal pressure. Upon leaving the HM, the entrapped NO molecules may passively diffuse through their SC‐stabilized/protected layer gradually to the tumor site, having a long‐lasting radiosensitizing effect and inhibiting tumor growth. The entire process of NO generation and delivery is conducted in a scavenger (Hb)‐free environment, mimicking the development of young ovoviviparous fish inside their mothers' bodies in the absence of predators before birth.     

基于宽带扫频式的弹载通信干扰机干扰类别的综合评判

对影响弹载通信干扰机干扰效果的主要因素进行了分析,建立了评价宽带扫频式弹载通信干扰机干扰类别的指标体系,通过比较和选择典型评价方法,首先根据两级比例法形成综合判断矩阵,然后运用层次分析法确定各指标的权重,最后分析构建了宽带扫频式弹载通信干扰机干扰类别的综合评判模型并举例进行了验证.结果表明弹载通信干扰机采用宽带扫频式干...