CuO formation control as a function of mixed ratio of Cu-free powders in the synthesis of YBCO superconductors on Cu substrates

YBa₂Cu₃O_x (Y123) superconducting films were fabricated on Cu substrates using a simple screen-printing method, from Cu-free powders (Y₂O₃ and BaCO₃). In the process, CuO, which causes superconducting properties of Y123 films to deteriorate, was formed on the film surface. By varying the atomic ratio of Y to Ba (Y:Ba = 1:1∼1:4), the ratio needed to prevent CuO formation was found for the film surface that had been heat-treated at 980^∘C for 17 s. The film, with the ratio of Y to Ba (Y:Ba = 1:1), is reheat-treated at 930^∘C for 9 min 30 s to form a superconducting Y123 phase. It was possible to prevent CuO formation by controlling the ratio of Cu-free powders in the mixture and to fabricate YBCO superconductors on Cu substrates using a two-step heat-treatment.     

Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition

PMN-PZT ceramics doped with Li₂CO₃ and Bi₂O₃ as sintering aids were manufactured in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, and their micro structural, dielectric and piezoelectric properties were investigated. The sintering aids were proved to lower the sintering temperature of doped PMN-PZT ceramics due to the effect of LiBiO₂ liquid phase. Optimal values for multilayer piezoelectric transformer application, such as electromechanical coupling factor (k_p) of 0.50, mechanical quality factor (Q_m) of 2264, and dielectric constant (K) of 1216, and curie temperature (T_c) of 317 °C were found at 0.1 wt.% Li₂CO₃ added ceramics sintered at 940 °C.     

Point fingerprint: a new 3-D object representation scheme

This paper proposes a new, efficient surface representation method for surface matching. A feature carrier for a surface point, which is a set of two-dimensional (2-D) contours that are the projections of geodesic circles on the tangent plane, is generated. The carrier is named point fingerprint because its pattern is similar to human fingerprints and plays a role in discriminating surface points. Corresponding points on surfaces from different views are found by comparing their fingerprints. The point fingerprint is able to carry curvature, color, and other information which can improve matching accuracy, and the matching process is faster than 2-D image comparison. A novel candidate point selection method based on the fingerprint irregularity is introduced. Point fingerprint is successfully applied to pose estimation of real range data.     

Topical Omega-3 Fatty Acids Eyedrops in the Treatment of Dry Eye and Ocular Surface Disease: A Systematic Review

Dry eye is a common inflammatory condition of the ocular surface. While oral omega-3 supplementation for its treatment has been extensively studied, recent large-scale studies have cast doubt on their efficacy. However, efficacy of topical omega-3 has yet to be reviewed. We performed a systematic search of PubMed, Embase, and Cochrane databases for all studies evaluating topical omega-3 in dry eye. Five human and five animal studies were included. Of the five human studies, two were on dry eye disease (DED), one was on contact lens discomfort, and two were on patients undergoing corneal collagen crosslinking. In humans, there is promising evidence for improved ocular surface staining and tear break-up time compared to controls, equivocal evidence for improvements to ocular surface symptoms and meibomian gland dysfunction, and no effect on increasing tear production. Data from animal models largely agree with these findings, and further reveal decreased inflammatory cytokines and monocyte infiltration. Our review suggests that topical omega-3 is a promising treatment for dry eye, but also points to the paucity of evidence in this field. Further trials in humans are required to characterize effects of topical omega-3 and optimize its dosage.     

Comprehensibility of universal healthcare symbols for wayfinding in healthcare facilities

Healthcare facilities are often complex and overwhelming for visitors, and wayfinding in healthcare facilities can be challenging. As there is an increasing number of global citizens who travel to seek medical care in another country, it is critical to make wayfinding easy for visitors who are not familiar with the language in a foreign country. Among many wayfinding aids, symbols are helpful for those visitors who have limited ability to understand written language. This study tested universal healthcare symbols in the United States, South Korea, and Turkey to compare the comprehension of symbols cross-country and identify predictors of the correct comprehension. To explore statistically significant relationships between symbol comprehension and countries, Pearson's Chi-square tests, logistic regression, and ANOVA were conducted. The test results showed that ten symbols among 14 tested have significant relationship with countries. Results of this study demonstrate that symbol comprehension can be varied significantly in different countries.     

Prophylactic effects of probiotics on respiratory viruses including COVID-19: a review

Food Science and Biotechnology - Coronavirus disease 2019 (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is mainly transmitted through respiratory droplets....     

Characterization of subtilin KU43 Produced by Bacillus subtilis KU43 isolated from traditional Korean fermented foods

An antimicrobial peptide produced by Bacillus subtilis KU25, KU43, and KU44 was isolated from traditional Korean fermented foods and characterized. It was named as subtilin KU25, KU43, and KU44. Subtilin KU25, KU43, and KU44 were sensitive against α-chymotrypsin, protease XIII, and various proteinase enzymes, respectively. B. subtilis KU43 was selected as the producer with the broadest antimicrobial spectrum. Subtilin KU43 was stable at a pH range of 3 to 9 for 4 h, and withstood exposure to temperatures of 50–90°C for 30 min. The mode of inhibition against Listeria monocytogenes ATCC 15313 involved a bactericidal effect by a reduction in the cell numbers and breakage of the indicator cell membranes. The molecular mass of subtilin KU43 was measured at approximately 3.5 kDa. These results demonstrate the development of novel strains from traditional Korean fermented foods, and illustrate the possibility that some of these strains might generate a natural preservative compound.     

POSS-based luminescent hybrid material for enhanced photo-emitting properties

In this present work, we have developed a novel POSS type monomer ligand “2,6-pyridinediamine-bis-(propanylheptaisobutyl POSS)” (PDC-POSS) and utilized in the preparation of potential luminescent hybrid complex Eu-PDC-POSS with an inner transition metal ion Eu³⁺. The solubility and photo-emitting properties of new Eu-PDC-POSS hybrid material were studied. The precursor PDC-POSS was synthesized by treating (3-aminopropyl)heptaisobutyl POSS with PDC (2,6-pyridinedicarboxylic acid chloride), and then coordinated with Eu³⁺ using europium nitrate to afford Eu-PDC-POSS hybrid material. The europium-doped hybrid material was characterized using fourier transform infrared spectroscopy, and scanning electron microscopy along with energy dispersive X-ray analysis. The photo emitting properties were studied using a fluorescence spectrophotometer in which, the results showed enhancement in red emission peak at 618 nm for Eu-PDC-POSS, when compared to that of a known solgel-based material Eu-PDC-solgel.     

Anti-inflammatory and anti-genotoxic activity of branched chain amino acids (BCAA) in lipopolysaccharide (LPS) stimulated RAW 264.7 macrophages

Food Science and Biotechnology - The purpose of this study was to evaluate the anti-inflammatory and anti-genotoxic activity of branched-chain amino acids (BCAAs) in lipopolysaccharide (LPS)...     

Analysis of thermoelastic characteristics for vertical-cracked thermal barrier coatings through mathematical approaches

Thermoelastic characteristics of thermal barrier coatings (TBCs) with vertical cracks were analyzed through mathematical approaches to investigate the thermoelastic behaviors of TBCs in a service temperature. TriplexPro?-200 system was applied to prepare the relatively dense TBC using METECO 204NS powder. The microstructure of top coat in the TBC was just controlled to create vertical type cracks by reheating without powder feeding in same equipment and rapid cooling process. A couple of governing partial differential equations were derived based on the thermoelastic theory, and a finite volume model was developed to the governing equations to evaluate the thermoelastic characteristics, such as temperature distribution profile, displacement, and stress, inducing a thermal fatigue. For the specimen with two or more vertical type cracks, smaller displacement appears to longitudinal direction and larger displacement to radial direction as the number of crack increases. In the longitudinal stress distribution profiles to z-direction, the tensile stress at the interface between the bond coat and the substrate converts into the compressive stress when the specimen has vertical cracks more than two, while larger magnitude undulation develops for the specimen with smaller number of crack in the radial stress distribution profiles. The results obtained demonstrate that multiple vertical cracks enhance the thermal durability and extend the lifetime of TBCs.