Preparation and characterization of modified starch‐based plastic film reinforced with short pulp fiber. II. Mechanical properties

Native corn starch‐ and hydroxypropylated starch (HPS‐) based plastic films were prepared using the short pulp fiber as the reinforcement and the glycerol as the plasticizer. The results of tensile test showed that the strain and stress at break and elastic modulus increased with pulp content. With glycerol content, the strain at break increased considerably, but the breaking stress and elastic modulus decreased. And the stress–strain curves showed that the brittleness problem of films was overcome by the pulp, glycerol, and water content. The hydroxypropyl starch films showed results similar to those of the native starch films. The results of the three‐point bending test showed that maximum deflection, flexural strength, and specific work increased with pulp content, but the flexural modulus was the highest at a pulp content of 20%. And with the glycerol content, the maximum deflection and specific work of rupture increased, but the bending elastic modulus decreased. The hydroxypropyl starch films showed results similar to those of native starch films as far as the maximum deflection and flexural strength were concerned, but the bending elastic modulus and specific work of the hydroxypropyl starch films were considerably lower than those of starch films. So it was concluded that the flexibility of films was improved by the hydroxypropylation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2108–2117, 2003     

High oleic acid oil suppresses lung tumorigenesis in mice through the modulation of extracellular signal-regulated kinase cascade

This study was undertaken to estimate the effect of dietary high oleic acid oil (OA) on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in mice. Diet containing 10% oil was fed to mice through experimental periods. On day 30 after NNK injection (100 mg/kg body weight, i.p.), the treatment increased the level of prostaglandin E₂ (PGE₂) as well as proliferating cell nuclear antigen, a marker of cell proliferation in a high linoleic acid oil (LA)-fed group but not in an OA-fed group. The NNK treatment also induced the activation of an extracellular signal-regulated kinase (Erk) cascade (Erk, Mek and Raf-1) in an LA-fed group. On the other hand, OA feeding abolished the NNK-induced activation of the Erk cascade. In conjugation with these events, OA feeding reduced lung tumor incidence and tumor multiplicity (percentage of mice with tumors) in mice compared with LA feeding at the 20th experimental week. These results suggest that OA suppresses lung tumorigenesis and that this suppression is correlated with the inhibition of PGE₂ production and inactivation of the Erk cascade.     

Measurement of minimum angle of resolution (MAR) in the stereoscopic display using the optotype of stereoscopic stimuli

In stereoscopic images, the crossing point of the viewing directions of the two eyes determines the perceived depth. Assuming that accommodation is affected by the positions of the crossing point, the effect of crossing point on minimum angle of resolution (MAR) was investigated. For 40 participants, MAR was measured by two‐alternative forced choice where Snellen optotype E of up and down directions were used as two kinds of stimuli. As the crossing point of the viewing direction of the left and right eyes moves farther from the sample display, the ability to identify the direction of letter E decreases at the optotype of the same line thickness. The change of MAR shows linear trends with respect to the optical power change that are the reciprocal of the distance from the participant to the crossing points located out of screen and on screen.     

Study of the Interfacial Reaction of Styrene/Maleic Anhydride Copolymerand (Amine)-Terminated Butadiene-Acrylonitrile Copolymer Using FTIR Imaging Techniques

The interfacial reaction between styrene/maleic anhydride copolymer (SMA) and amine-terminated butadiene-acrylonitrile copolymer (ATBA) was observed using Fourier transform infrared (FTIR) imaging spectroscopy. The anhydride and amine reacted to form an imide. Each component was detected using a characteristic wavenumber, which was 1601 cm -1 for SMA, 2237 cm -1 for ATBA, and 1701 cm -1 for the imide. FTIR images were taken as the reaction proceeded at 150, 160, 170, and 180°C. At low temperatures (150 and 160°C), diffusion-controlled kinetics were observed since interdiffusion between the reactants did not appear in the images. On the other hand, both the diffusion front and the reaction front are observed in the images at high reaction temperatures (170 and 180°C), which indicates that the kinetics became reaction-controlled rather than diffusion-controlled. Absorbance profiles were extracted from the images and used for the calculation of the extent of reaction. The data were analyzed using the Frederickson and Milner theory based on the assumption of diffusion-controlled kinetics, and this theory fit the low reaction temperature data.     

A multi-fluid nonrandom lattice fluid model: General derivation and application to pure fluids

A multi-fluid nonrandom lattice fluid model with no temperature dependence of close packed volumes of a mer, segment numbers and energy parameters of pure systems is presented. The multi-fluid nonrandom lattice fluid (MF-NLF) model with the local composition concept was capable of describing properties for complex systems. However, the MF-NLF model has strong temperature dependence of energy parameters and segment numbers of pure systems; thus empirical correlations as functions of temperature were represented for reliable and convenient use in engineering practices. The MF-NLF model without temperature dependence of pure parameters could not predict thermodynamic properties accurately. It was found that the present model with three parameters describes quantitatively the vapor pressure and the saturated density for the pure fluid.     

Changes in the Peeled Surfaces of Copper Thin Films Deposited on Polyimide Substrates After Heat Treatment

Peel strength between a copper (Cu) thin film and a polyimide (pyromellitic dianhydride-oxydianiline, or PMDA-ODA) substrate is reduced by heat treatment at 150°C in air. In this work, we investigated the peel strength, the morphology of the interface between Cu films and polyimide substrates using optical microscopy and electron microscopy, and chemical change of the interface using Auger electron spectroscopy (AES) and micro X-ray photoelectron spectroscopy (XPS). The analysis showed that CuO “lumps” were present on the peeled surface of PMDA-ODA after heat treatment at 150°C in air. The peeled surfaces of other polyimide substrates were also analyzed: biphenyl dianhydride-para phenylene diamine (BPDA-PDA) and biphenyl dianhydride-oxydianiline (BPDA-ODA). CuO lumps were present on the peeled surface of BPDA-ODA after the heat treatment, but not that of BPDA-PDA. Compared with the adhesion strength for the Cu thin film, the adhesion strength was high for the Cu/PMDA-ODA and Cu/BPDA-ODA laminates, but the adhesion strength was very low for the Cu/BPDA-PDA laminate. This low strength is the reason that CuO lumps were not detected on the peeled surface of the BPDA-PDA substrate. These CuO lumps were related to the adhesion degradation of the Cu/polyimide laminates after the heat treatment.     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Equilibrium and kinetic studies of the extraction of chelated copper(II) anions with Aliquat 336

The equilibrium and kinetics of solvent extraction of Cu²⁺ from aqueous solutions containing equimolar EDTA with Aliquat 336 in n‐decanol and kerosene at 298 K were investigated. The concentrations of Cu²⁺ (8–50 mol m^?3), Cl^? (5–60 mol m^?3), and Aliquat 336 (20–100 mol m^?3) were varied. A semi‐empirical model with three parameters was proposed to describe the equilibrium behavior, in which the non‐idealities in both aqueous and organic phases were considered. Over the ranges studied, the model agreed reasonably well with the experimental data (standard deviation, 15%). The forward and backward reaction rate constants were determined as (5.31 ± 0.16)×10^?6 m^9/4 mol^?3/4 s^?1 and (2.62 ± 0.09)×10^?7 s^?1, respectively, at 298 K. An interfacial reaction mechanism was proposed, which revealed that the reaction between the chelated anions and trimeric amine molecules at the interface was rate limiting. The derived rate laws were consistent with the experimental results. © 2002 Society of Chemical Industry     

Interactions of Impact Shock Waves in a Thin-Walled Explosive Container. II. Impact by a Cone-Nosed Projectile

Interaction of impact shock waves that could detonate an explosive (Composition B) confined in a thin-walled container impacted by a cone-nosed projectile is numerically studied, based on the Forest Fire explosive reaction rate model. The normal impact on the container by a small projectile with a conical nose is considered. Depending on the cone angle of the nose part of the projectile, the zone of interaction of initiating shock waves can be remote from the central axis of the impact. The off-the-central-axis detonation is interpreted from the viewpoint of different interaction modes in the explosive container, which are reflected from the cassette wall, change their directions, and superimpose onto each other, leading to explosive detonation.     

Catalytic degradation of waste polyolefinic polymers using spent FCC catalyst with various experimental variables

Liquid-phase catalytic degradation of waste polyolefinic polymers (HDPE, LDPE, PP) over spent fluid catalytic cracking (FCC) catalyst was carried out at atmospheric pressure with a stirred semi-batch operation. The effect of experimental variables, such as catalyst amount, reaction temperature, plastic types and weight ratio of mixed plastic on the yield and accumulative amount distribution of liquid product for catalytic degradation was investigated. The initial rate of catalytic degradation of waste HDPE was linearly increased with catalyst amount (4-12 wt%), while that was exponentially increased with reaction temperature (350-430 ‡C). Spent FCC catalyst in the liquid-phase catalytic degradation of polymer was not deactivated fast. The product distribution from catalytic degradation using spent FCC catalyst strongly depended on the plastic type. The catalytic degradation of mixed plastic (HDPE: LDPE: PP: PS=3: 2: 3: 1) showed lower degradation temperature by about 20 ‡C than that of pure HDPE.