Equalization digital on-channel repeater in the single frequency networks

Digital On-Channel Repeater (DOCR) can be used for Single Frequency Networks (SFN's). It is much simple and low cost compared to Distributed Transmitter which needs Studio to Transmitter Link (STL). However, traditional DOCR has one of those defects such as a power limit, a long time system processing delay or a poor output signal quality. In order to overcome all of those defects, we introduce Equalization DOCR (EDOCR) which regenerates the original 8-VSB output signal with relatively short time system processing delay. Lab. and Field test results show that the EDOCR can eliminate the loop-back signal up to 5.5 dB with 5.5 /spl mu/s system processing delay. By using EDOCR, we can save spectrum resources and extend coverage areas.     

Molecularly‐Engineered, 4D‐Printed Liquid Crystal Elastomer Actuators

Three‐dimensional structures that undergo reversible shape changes in response to mild stimuli enable a wide range of smart devices, such as soft robots or implantable medical devices. Herein, a dual thiol‐ene reaction scheme is used to synthesize a class of liquid crystal (LC) elastomers that can be 3D printed into complex shapes and subsequently undergo controlled shape change. Through controlling the phase transition temperature of polymerizable LC inks, morphing 3D structures with tunable actuation temperature (28 ± 2 to 105 ± 1 °C) are fabricated. Finally, multiple LC inks are 3D printed into single structures to allow for the production of untethered, thermo‐responsive structures that sequentially and reversibly undergo multiple shape changes.     

Hierarchical sampling optimization of particle filter for global robot localization in pervasive network environment

This paper presents a hierarchical framework for managing the sampling distribution of a particle filter (PF) that estimates the global positions of mobile robots in a large‐scale area. The key concept is to gradually improve the accuracy of the global localization by fusing sensor information with different characteristics. The sensor observations are the received signal strength indications (RSSIs) of Wi‐Fi devices as network facilities and the range of a laser scanner. First, the RSSI data used for determining certain global areas within which the robot is located are represented as RSSI bins. In addition, the results of the RSSI bins contain the uncertainty of localization, which is utilized for calculating the optimal sampling size of the PF to cover the regions of the RSSI bins. The range data are then used to estimate the precise position of the robot in the regions of the RSSI bins using the core process of the PF. The experimental results demonstrate superior performance compared with other approaches in terms of the success rate of the global localization and the amount of computation for managing the optimal sampling size.     

Simultaneous Formation of Ohmic Contacts on p +- and n +-4H-SiC Using a Ti/Ni Bilayer

In this work, Ti/Ni bilayer contacts were fabricated on both p ⁺- and n ⁺-4H-SiC formed by ion implantation, and the effects of the Ti interlayer on the contact resistance and interfacial microstructure were studied. Adoption of a thin (10 nm) Ti interlayer resulted in specific contact resistance of 4.8 μΩ cm² and 1.3 mΩ cm² on n ⁺- and p ⁺-4H-SiC, respectively, comparable to the values for contacts using only Ni. Moreover, contacts using Ti/Ni provide a flat and uniform interface between Ni₂Si and SiC, whereas discontinuous, agglomerated Ni₂Si islands are formed without the use of a Ti interlayer. In addition, the Ti interlayer was demonstrated to effectively dissociate the thin oxide film on SiC, which is advantageous for low-resistance, reliable ohmic contact formation. In summary, use of a Ti/Ni bilayer is a promising solution for one-step formation of ohmic contacts on both p ⁺- and n ⁺-4H-SiC, being especially suitable for SiC n-channel metal-oxide-semiconductor field-effect transistor (nMOSFET) fabrication.     

Fully aromatic polyimide gate insulators with low temperature processability for pentacene organic thin-film transistors

This paper demonstrates the effects of the imidization ratio of polyimide gate insulators on the performance of organic thin-film transistors (OTFTs). We report the synthetic results of polyimide films imidized at a temperature of 200 °C along with an easily removed organic base catalyst (1,8-diazabicyclo[5.4.0]undec-7-ene, DBU), and their application in gate insulators of organic thin-film transistors. The degree of imidization increased to almost 100% after a thermal treatment at 200 °C for 40 min in the presence of DBU. The performance of the pentacene OTFT dramatically improved by using low temperature cured polyimide film as the gate insulator.     

Designing a Stable Cathode with Multiple Layers to Improve the Operational Lifetime of Polymer Light‐Emitting Diodes

The short device lifetime of blue polymer light‐emitting diodes (PLEDs) is still a bottleneck for commercialization of self‐emissive full‐color displays. Since the cathode in the device has a dominant influence on the device lifetime, a systematic design of the cathode structure is necessary. The operational lifetime of blue PLEDs can be greatly improved by introducing a three‐layer (BaF₂/Ca/Al) cathode compared with conventional two‐layer cathodes (BaF₂/Al and Ba/Al). Therefore, the roles of the BaF₂ and Ca layers in terms of electron injection, luminous efficiency, and device lifetime are here investigated. For efficient electron injection, the BaF₂ layer should be deposited to the thickness of at least one monolayer (～3 nm). However, it is found that the device lifetime does not show a strong relation with the electron injection or luminous efficiency. In order to prolong the device lifetime, sufficient reaction between BaF₂ and the overlying Ca layer should take place during the deposition where the thickness of each layer is around that of a monolayer.     

Low Voltage CMOS LC VCO with Switched Self‐Biasing

This paper presents a switched self‐biasing and a tail current‐shaping technique to suppress the 1/f noise from a tail current source in differential cross‐coupled inductance‐capacitance (LC) voltage‐controlled oscillators (VCOs). The proposed LC VCO has an amplitude control characteristic due to the creation of negative feedback for the oscillation waveform amplitude. It is fabricated using a 0.13 µm CMOS process. The measured phase noise is ‐117 dBc/Hz at a 1 MHz offset from a 4.85 GHz carrier frequency, while it draws 6.5 mA from a 0.6 V supply voltage. For frequency tuning, process variation, and temperature change, the amplitude change rate of the oscillation waveform in the proposed VCO is 2.1 to 3.2 times smaller than that of an existing VCO with a fixed bias. The measured amplitude change rate of the oscillation waveform for frequency tuning from 4.55 GHz to 5.04 GHz is 131 pV/Hz.     

Optical BGP Routing Convergence in Lightpath Failure of Optical Internet

Optical Border Gateway Protocol (OBGP) is an extension to BGP for Optical Cross Connects (OXCs) to automatically setup multiple direct optical lightpaths between many different autonomous domains. With OBGP, the routing component of a network may be distributed to the edge of the network while the packet classification and forwarding is done in the core. However, it is necessary to analyze the stable convergence functions of OBGP in case of lightpath failures. In this paper, we first describe the architecture of the OBGP model and analyze the potential problems of OBGP, e.g., virtual BGP router convergence behavior in the presence of lightpath failure. We then propose an OBGP convergence model derived from an inter‐AS (Autonomous System) relationship. The evaluation results show that the proposed model can be used for a stable OBGP routing policy and OBGP routing convergence under lightpath failures of the optical Internet.     

Security flaw of authentication scheme with anonymity for wireless communications

Recently, Wu et al. discussed some security flaws of enhanced authentication scheme with anonymity for wireless environments proposed by Lee et al. and showed how to overcome the problems regarding anonymity and backward secrecy. However, in the paper, we will show that Wu et al.?s improved scheme still did not provide user anonymity as they claimed.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.