Evaluation of ethanol fermentation parameters for bioethanol production from sugar beet pulp and juice

The aim of this study was to investigate the efficient utilization of sugar beet pulp, as well as raw, concentrated raw and thick sugar beet juice, for bioethanol production. Different fermentation conditions were examined. The influence of raw material pre‐treatment (pasteurization or sterilization), type of batch culture process (stationary or shaken) as well as the type of Saccharomyces cerevisiae yeast preparation on the yields of the process were studied. Moreover, the fermentation process effectiveness was examined in connection with the quality of the obtained distillates. Sterilization, stationary batch culture and Safdistil C‐70 yeast preparation were identified as the most profitable factors for sugar beet pulp fermentation, providing a high fermentation efficiency and ethanol yield (87.7% of theoretical ethanol yield). Concentrated raw beet juice resulted in a value of 94.2% of theoretical yield, and thick juice a 92.6% yield. The results suggest that bioethanol production from sugar beet pulp and sugar beet juice has promise as an alternative fuel. The raw spirits obtained from the sugar beet juice were characterized as having the lowest quantity of volatile by‐products. Copyright © 2014 The Institute of Brewing & Distilling     

Application of various methods for determination of the color of cocoa beans roasted under variable process parameters

Cocoa beans of Forastero variety from Togo were subjected to roasting under either constant or variable process parameters. The variable process parameters were roasting air flow rate, temperature and relative humidity. The color of roasted cocoa beans was determined by pigment extraction under various conditions followed by either their spectrophotometric assays or CIE L*a*b measurements. Also the Maillard compounds index and total polyphenols content correlated with progress of the browning of beans were determined. It was found that an increase in the roasting air relative humidity stimulated formation of brown pigments, while elevated temperature caused worsening of color parameters of roasted cocoa beans. The most suitable method of color characterization of roasted cocoa beans was found to be pigments extraction combined with either separation of their fractions or CIE L*a*b measurements. These assays revealed that cocoa beans roasted under variable roasting air flow rate were characterized by improved color parameters. The relatively simple and inexpensive CIE L*a*b measurements ensured fast analysis of color parameters, while total polyphenols in roasted cocoa beans were quickly estimated by using F–C reagent. Furthermore, quantification of melanoid pigments in roasted cocoa beans can be based on determination of the index of nonenzymatic browning products content, which is relatively simple and inexpensive.     

Silicon compounds as additives improving coating performance: fixation of silicon compounds with cellulose

In this study the reactivity of cellulose with new solvent born preparations containing organosilanes, alkyd resin and natural oil was analysed. Structural analysis of cellulose after reaction with organosilanes and after extraction was performed using Fourier-transform infrared spectroscopy (FTIR). In IR spectra the analyzed bands included 1250 cm⁻¹ responsible for vibrations of the SiC group and 800 cm⁻¹ responsible for vibrations of SiC and/or SiO groups. These bands are characteristic of silicon bonds with atoms of carbon and oxygen originating from the methoxy groups found in organosilanes. The presence of these bands in the spectra proves the occurrence of a reaction between cellulose and organosilanes. The concentration of silicon was determined by AAS in cellulose after reaction with preparations and after extraction.     

Microbiological denitrification of red beet juice

The purpose of study was the determination of optimal conditions for red beet juice denitrification by Paracoccus denitrificans bacteria as well as the evaluation of the usefulness of microbiologically treated juice for the production of a natural colouring preparation for foods. Total reduction of nitrates was found during bacterial culturing at 25 and 30 °C, at an initial pH of 7.0-8.0 and juice osmotic pressure of 900-1100 mOsm/kg. Microbiological denitrification procedure affected colour, taste and aroma of the juice. However, the use of juice as food colouring and component was made feasible by acidification and partial evaporation of water together with volatile substances.     

How many protein‐coding genes are there in the Saccharomyces cerevisiae genome?

We have compared the results of estimations of the total number of protein-coding genes in the Saccharomyces cerevisiae genome, which have been obtained by many laboratories since the yeast genome sequence was published in 1996. We propose that there are 5300-5400 genes in the genome. This makes the first estimation of the number of intronless ORFs longer than 100 codons, based on the features of the set of genes with phenotypes known in 1997 to be correct. This estimation assumed that the set of the first 2300 genes with known phenotypes was representative for the whole set of protein-coding genes in the genome. The same method used in this paper for the approximation of the total number of protein-coding sequences among more than 40 000 ORFs longer than 20 codons gives a result that is only slightly higher. This suggests that there are still some non-coding ORFs in the databases and a few dozen small ORFs, not yet annotated, which probably code for proteins.     

Effects of the methods of pre-treatment before freezing on the retention of chlorophylls in frozen leaf vegetables prepared for consumption

The investigation included kale, New Zealand spinach and spinach. The evaluation covered the raw material; the raw material after blanching; the raw material after cooking; and frozen products prepared for consumption after 0, 4, 8 and 12 months of refrigerated storage. Both the traditional method of freezing (blanching before freezing) and the modified method of freezing (cooked before freezing) were used in the experiment, as well as two storage temperatures, T = −20 °C and T = −30 °C. The content of chlorophylls in fresh kale was four times that in New Zealand spinach and 1.5 times that in spinach. With the exception of New Zealand spinach, blanching and cooking significantly reduced the content of chlorophylls. In kale products prepared for consumption, the content of chlorophylls decreased in each successive stage of the investigation. In products of New Zealand spinach and spinach, the losses were usually not significant. After 12 months of refrigerated storage, frozen kale products prepared for consumption retained 52–65% of total chlorophylls compared with the content in the raw material; products of New Zealand spinach and spinach retained 66–71%. In kale and New Zealand spinach, the content of chlorophyll a decreased more rapidly than that of chlorophyll b, while in spinach the converse was true. The kale products obtained using the modified method contained more chlorophylls, while in the two spinach species their content was lower. The lower storage temperature resulted in a higher retention of chlorophylls in vegetables.     

Bioactive compounds in rye flours with different extraction rates

Rye flours with extraction rate of 100% (wholemeal flour), 95% (brown flour), 90% (brown flour) and 70% (light flour) were prepared in order to study the relation between flour extraction rates and content of bioactive compounds. The following compounds were analysed: total phenolic compounds (TPC), total flavonoids (TF), inositol hexaphosphate (IP6), reduced (GSH) and oxidized (GSSG) glutathione, tocopherols (T) and tocotrienols (T3). The reduced/oxidized glutathione status (GSH/GSSG) of the flours was examined as a potential index of flour resistance against oxidative stress. The following observations were made in relation to the flour extraction rates and bioactive compounds contents: (a) milling process caused decrease in content in TPC, TF, IP6, GSH and GSSG, T and T3, (b) the most resistant against oxidation processes were suggested a brown flours, then light and finally wholemeal flour, (c) the ratio of tocotrienols to tocopherols (T3/T) was the highest in rye flours with extraction rate of 100–90% whereas light flour was the poorest source of tocopherols and tocotrienols. The provided data support current trend to increase number of rye products from wholemeal or brown flours.     

In vitro culture of Boletus badius as a source of indole compounds and zinc released in artificial digestive juices

Food Science and Biotechnology - The objective of this study was to obtain the in vitro cultures of Boletus badius under controlled conditions and investigate the release of indole compounds and...