Study of Desorption and Adsorption During Grain Aeration

One requirement in designing and operating and operating system is to minimize the moisture change in stored grain. Moisture transfer during the aeration process is generally believed to be caused by the partial pressure difference between water in grain and water in air (P₃-P₄). A mathematical model was developed for rough rice, which predicts the partial pressure difference under various grain and ambient conditions. Observations of moisture change over 10 aeration tests confirmed the good correlation between sorption phenomena and partial pressure differences. Studies indicated that air relative humidity, air temperature, grain temperature and grain moisture are significant factors influencing the partial pressure differences and, thus, affecting     

Analysis of thin walled structures using the boundary element method

In this article the direct boundary element formulations of stretching and bending plate problems are combined together to solve thin walled structures and other similar frames. The final system is obtained by assuming each individual plane structural element as a subregion. After the necessary transforms of these equations they can be combined together taking into account the displacement compatibility and equilibrium conditions.     

Cost Effective VLSI Architectures for Full-Search Block-Matching Motion Estimation Algorithm

In this paper, we present efficient VLSI architectures for full-search block-matching motion estimation (BMME) algorithm. Given a search range, we partition it into sub-search arrays called tiles. By fully exploiting data dependency within a tile, efficient VLSI architectures can be obtained. Using the proposed VLSI architectures, all the block-matchings in a tile can be processed in parallel. All the tiles within a search range can be processed serially or concurrently depending on various requirements. With the consideration of processing speed, hardware cost, and I/O bandwidth, the optimal tile size for a specific video application is analyzed. By partitioning a search range into tiles with appropriate size, flexible VLSI designs with different throughput can be obtained. In this way, cost effective VLSI designs for a wide range of video applications, from H.261 to HDTV, can be achieved.     

Measurement and prediction of pressure drop in two-phase flow

Experimental data for air–water two-phase co-current flow in two different pipe diameters were used to test the prediction of pressure drop by a number of existing theories and correlations. Several models are shown to be useful for prediction, particularly with the stratified regimes which have proved difficult to handle in the past. The model suggested by Olujic proved to be of particular value.     

The effect of bandwidth allocation policies on delay inunidirectional bus networks

We consider the problem of allocating bandwidth fairly to each node in a shared, unidirectional bus network. We focus on the p_i persistent protocol, since these are open loop policies designed to operate well in high speed networks, which have a very large bandwidth-delay product and feedback in the upstream direction is not available in a timely manner. First, we introduce an improvement to the basic p_i persistent protocol, in which we replace random coin tosses with a deterministic counting algorithm, and thereby reduce the delays for all nodes for any given choice of {p_i}. We then describe an exact method for calculating average packet delays and queue lengths in both the p_i persistent and our new deterministic n out of m protocols, based on the regenerative approach of Georgiades et al. (1987). These delay results, together with simulation measurements, show that both of these protocols still waste some bandwidth. After presenting a lower bounding argument to show that some wasted bandwidth is inevitable in all such distributed access control schemes, assuming a passive bus without feedback in the upstream direction, we show that changing the bus to unidirectional point-to-point links between (very simple) active interfaces at each node allows us to construct distributed access schemes that require no upstream feedback and are both work conserving and fair. To illustrate how this can be done, we introduce the p_i preemptive protocol, in which each node randomly inserts its own packets into the traffic arriving from upstream. We derive a simple and effective heuristic for calculating the preemption probability for each node, and use simulation to show how well it equalizes the delays at each node     

Influence of lips on thin-walled sections

Turning the free edge of an unstiffened flange inwards or outwards to form a ‘lip’, can substantially improve the local buckling resistance of a member. The lip is the most common type of edge stiffener used in cold-rolled, thin-walled sections. In this paper the behaviour of plate elements of thin-walled sections stiffened by compound lips (i.e. lips which are folded twice to form ‘lips on the lips’) is examined both theoretically and experimentally. An outline of a series of tests on compound edge-stiffened thin-walled sections of various geometries is given and some load-end compression displacement paths are compared with the theoretical predictions. Reasonably good agreement is obtained between the experimental and theoretical results. Comparisons of the theoretical predictions with experimental results of other researchers are also presented in this paper.     

EFFECT OF STORAGE ON THE RHEOLOGICAL BEHAVIOUR OF BABY FOODS

The effect of storage temperature on rheological behaviour of four varieties of baby foods was studied. After 24-month storage at 15C and 25C, the constant A in Weltman model increased significantly for the vegetables, meat and fish samples, and decreased significantly for the fruit samples. After 24-month storage at 5C and 15C there were no significant changes in flow behavior index, consistency index and yield stress of the Herschel-Bulkley model for the vegetables, meat, fish and fruit samples. Increase in storage temperature decreased the consistency index and yield stress of the fruit samples.     

NMR IMAGING, CALORIMETRIC, and MATHEMATICAL MODELING STUDIES of FOOD FREEZING

Nuclear magnetic resonance imaging (MRI), calorimetry, and temperature measurements were used to monitor cylindrical potato sections frozen at -11C and -42C. MRI showed the advance of the nonsymmetric freezing zone and loss of signal intensity as liquid water turned to ice. Differential calorimetry was used to follow heat removal during transient freezing. Measured times to 95% enthalpy change were 24 min (-42C) and 49 min (-11C), as compared to modeled values of 29 min (-42C) and 100 min (-11C). Times to 95% change in the NMR signal, integrated over the area of the image, were 21 min (-42C) and 56 min (-11C). Changes in NMR signal intensity could be correlated with the amount of unfrozen water remaining after a steady-state had been reached. At -42C, NMR indicated 25% unfrozen water remaining as compared to 26% by calorimetry, and 22% by modeling. At -11C, NMR measured 67% unfrozen water remaining as compared to 48% by calorimetry, and 25% by equilibrium modeling.     

A comparison of mail and telephone interview strategies for mental health surveys

The high cost of mental health surveys of the general population has sparked interest in less costly research methods. Two low-cost mental health survey strategies (mail and telephone) were compared in terms of cost, response rate and quality of data obtained. A total of 1,074 persons agreed to participate in the study as a sample, one-half by telephone and the other half by mail. They completed the Diagnostic Interview Schedule Self-Administered, a questionnaire designed to be self-administered, which was used to assess specific mental disorders and to evaluate risk factors. In addition, 239 respondents who were selected according to the presence or absence of specific diagnoses were reinterviewed face-to-face using the Diagnostic Interview Schedule as an external criterion. The telephone method yielded a better response rate (15% higher) and better control over answers (for example, less missing data). The mail strategy was less expensive and appeared to yield data of slightly better quality, particularly for respondents suffering from anxiety disorders.     

Power engineering industry interaction at Clemson University

The authors present a successful model of industry/university cooperation in establishing a strong power system curriculum in both the graduate and undergraduate level. Numerous long-term and short-term research projects have been developed to satisfy the university mission and to tackle challenging problems facing the power industry. A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. The power industries involvements in the power program at Clemson University and the strategic improvements that have been accomplished in research and education are outlined