Der PC in zehn Jahren und seine Auswirkungen auf die Gesellschaft

In this article it is argued that in ten years’ time personal computers as we know them now won’t exist anymore — all their functions will by then be integrated in mobiles which will be our steady companions. As such, mobiles will change our lives to an enormous extent. Technology as well as consequences will be discussed in this paper.     

Realistic semiconductor heterostructures design using inverse scattering

We discuss the construction of optimized electronic filters using inverse scattering methods. We study a wide range of densities and temperatures, room temperature included. Discretization methods of the potential (including the self-consistent potential of the conduction electrons) are worked out that retain all its properties.     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Referenzprozesse für elektronische Ausschreibungen aus Sicht des industriellen Einkaufs

Many companies and purchasing departments only possess a limited knowledge about the modelling of inter-company business processes for electronic procurement. In the past the discussion about electronic procurement was mostly focused on technical aspects. This article introduces a reference process model for procurement auctions. The process model is made up of a basic process, which describes a minimal process for procurement auctions, and a number of process alternatives, which allow for the adoption of the basic process to changing parameters and individual company requirements.     

Simulationsmodell zur Bestimmung der magnetischen Eigenschaften von Transformatorkernen bei nichtharmonischer Erregung

Übersicht Ausgehend von der modellmäßigen Domänenstruktur ferromagnetischer Werkstoffe werden für den Bereich einer 180°-Blochwand die Kräfte zwischen magnetischen Elementardipolen untereinander und gegenüber einem äußeren Magnetfeld berechnet und so die Blochwanddynamik erfaßt. Da nicht alle benötigten Parameter aus der atomaren Struktur des Werkstoffs ableitbar sind, werden die freien Parameter durch Anpassung der Simulation an eine z.B. B-H-Messung 50 Hz festgelegt. Ziel dieses so kalibrierten Modells ist es, Aussagen zum Werkstoffverhalten in Betriebsbereichen zu liefern, die durch normgerechte Werkstoffbewertung nicht abgedeckt und für den praktischen Einsatz von Interesse sind. Als Anwendungsbeispiel wird die B-H-Charakteristik eines Transformatorkerns bei Impulserregung simuliert. Obwohl die Übereinstimmung mit Messungen gut ist, weisen detailliertere Betrachtungen auf eine verbesserungsfähige Verlustmodellierung hin.

---

Simulation model to determine the magnetic properties of transformer cores for non-harmonic excitation

Contents Employing the modelled domain structure in ferromagnetic material, for the area of a 180° blochline the forces between the atomic magnetic dipoles and by an outer magnetic field are calculated and so the dynamic properties of the blochline are considered. Because not all required parameters can be derived from the atomic structure of the material, the remaining parameters are set by adapting the simulation to measured values e.g. for 50 Hz. The aim of the so calibrated model is to determine the behaviour of the material for working conditions, which cannot be investigated by standardized measurings but are of special interest. As an example of application the hysteresis loop of a pulse stressed transformer core is simulated. Although the correspondence with the measured values is quite good, on closer inspection an improvable loss modelling is indicated.

     

Radiale Wärmeleitung in durchströmten Schüttungsrohren

Heat Transport to the Wall of Packed Tubes. Radial conduction of heat in packed tubes has a crucial influence on yield and selectivity of many heterogeneously catalyzed reactions. In spite of many years of intensive research in the field, there are still tremendous discrepancies between correlations of different origin. Even the standard model using two constant heat transport parameters, which was introduced in the fifties and has since become most widely accepted, has been controversially discussed and called into question. The unsatisfactory state of the art has been an incentive for several groups of researchers to take up this old topic once again. Three parallel experimental investigations on heat transport with air flowing in packed tubes of similar dimensions, electrically heated, steam-heated, or water-cooled, were completed in 1991. Comparative evaluation of the results of these three investigations, together with other data from the relevant literature, now provides the first clear answers to some of the questions so controversially discussed in the past.     

In-situ-Messung der Stickoxidkonzentration in turbulenten Diffusionsflammen

Zusammenfassung Die laserspektroskopischen Me?methoden laserinduzierte Fluoreszenz und spontane Ramanspektroskopie werden eingesetzt zur Messung der Konzentrationen von Stickoxid, Hydroxyl sowie der chemischen Hauptkomponenten und der Temperatur. Betrachtet wird die thermische Umsetzung von Wasserstoff mit Luftsauerstoff. Es wird die experimentelle Vorgehensweise und Problematik dargestellt. Ebenso wird der Weg der Modellierung und Berechnung turbulenter Verbrennungsvorg?nge am konkreten Beispiel skizziert. Die Annahme chemischen Gleichgewichts stellt sich als ungenügend in der Berechnung der Stickoxid- und Hydroxylkonzentrationen heraus. Eine deutlich bessere Vorhersage wird durch Einführen einer Reaktionsfortschrittsvariablen für das chemische Modell erreicht.     

An efficient implementation of certain iterative refinement preconditioners

Preconditioned iterative methods of conjugate gradient type for solving elliptic and parabolic problems discretized on grids wth local refinement are considered. The sparsity pattern of the residuals computed throughout the iterative process is investigated. It turns out that they are nonzero only near the interface nodes between the coarse-and fine-grids. This observation is used to formulate the preconditioned CG, and when the matrix is not symmetric as in the parabolic case—the generalized CG and GMRES methods, thus substantially saving storage and computation.     

A local solution method for shock boundary-layer interaction on a swept wing

Summary The paper describes a local solution method for the calculation of the interaction between a weak shock front and a turbulent boundary layer on a swept wing. A multiple-deck approach allows the simplification of the governing equations according to the physical character of each deck. The mathematical model is based upon small-perturbation theory. The final boundary-layer solution is given by an iterative coupling of the solutions for each domain. The results are compared with experiments and with other theoretical solutions.