Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites

The changes in mechanical properties, the thermal stability, and the water absorption capacity of poly (vinyl chloride)/olive residue flour composites were studied as a function of various residue olive flour ratios, i.e., 0, 5, 15, and 25% by weight taking into account the effect of benzylation chemical treatment of the filler. The study showed that composite samples prepared with the untreated filler exhibited higher tensile modulus and hardness compared with the neat resin, whereas elongation and tensile strength were observed to decline. On the other hand, the PVC hardness was found to increase with addition of the untreated olive residue flour (ORF), however the composite samples prepared with the benzylated flour exhibited lower hardness than those prepared with untreated olive residue. Moreover, the amount of absorbed water depends on the amount of filler in the composite. The comparison of the results obtained from the samples of F5, F20, and F30 formulations between the untreated and treated ORF indicated a reduction in absorbed water for the composite samples containing treated ORF with benzyl chloride. As a result, the mechanical properties of the treated composites were improved. Furthermore, the thermal characterization of the different samples carried out by color change test and thermogravimetric analysis revealed an increase in the onset temperatures of decomposition for the treated composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Morphological aspects of rubber fracture and wear

Morphology of carbon black (CB)‐filled rubber was studied with AFM and SEM and the classification of filler agglomerates, based on their internal structure and filler–matrix interactions, has been proposed. It varies according to the activity of CB and the kind of rubber. It has been shown that fracture of rubber starts either inside filler agglomerates (de‐cohesion) or in a filler–matrix interphase (de‐adhesion) initiating wear of the material. Microscopic observations correlate well with TGA and EPR data of wear debris collected during friction of rubber. The increase of thermal stability of CB and the appearance of additional spin signals, respectively, for elongated samples or debris, are proposed to be associated with de‐cohesion or de‐adhesion of the agglomerates. New approach to the fracture of rubber called “fatal agglomerate concept” is presented. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.     

Temperature Dependence of the Magnetic Properties of Amorphous Fe-Me-Si-B Alloys

Alloying of amorphous Fe-Me-Si-B metallic compositions with nickel and molybdenum results in a decrease in the values of saturation magnetization in fields with a magnetic intensity of 0.72 MA/m. The same alloying additions decrease the temperature of formation of new magnetic Fe₃B-type phases, which are stable up to 873 ± 5 K.     

Plasma power can make better powders

It may be a truism to say that round powders pack better, but spheroidisation of powder particles is one of the successful commercial applications of induction plasma technology and can play a key role in substantial improvement of powder quality and fluidity…     

Distinctive Features of Minimization of a Risk Functional in Mass Data Sets

A statistical learning model is considered within the framework of the theory of uniform convergence of frequencies of errors in the case where the convergence is violated as a result of increasing the informativeness of training examples. Drawbacks of nonconstructive refinements of Vapnik-Chervonenkis estimates based on an assumption on the distribution law of violations are shown. A new approach to obtaining constructive estimates for mass data sets is proposed.     

Effect of current stressing on the reliability of 63Sn37Pb solder joints

The effect of current stressing on the reliability of 63Sn37Pb solder joints with Cu pads was investigated at temperatures of −5 °C and 125 °C up to 600 h. The samples were stressed with 3 A current (6.0 × 10² A/cm² in the solder joint with diameter of 800 μm and 1.7 × 10⁴ A/cm² in the Cu trace with cross section area of 35 × 500 μm). The temperatures of the samples and interfacial reaction within the solder joints were examined. The microstructural change of the solder joints aged at 125 °C without current flow was also evaluated for comparison. It was confirmed that the current flow could cause the temperature of solder joints to rise rapidly and remarkably due to accumulation of massive Joule heat generated by the Cu trace. The solder joints stressed at 125 °C with 3 A current had an extensive growth of Cu₆Sn₅ and Cu₃Sn intermetallic compounds (IMC) at both top and bottom solder-to-pad interfaces. It was a direct result of accelerated aging rather than an electromigration or thermomigration effect in this experiment. The kinetic is believed to be bulk diffusion controlled solid-state reaction, irrespective of the electron flow direction. When stressed at −5 °C with 3 A current, no significant change in microstructure and composition of the solder joints had occurred due to a very low diffusivity of the atoms as most Joule heat was eliminated at low temperature. The IMC evolution of the solder joints aged at 125 °C exhibited a subparabolic growth behavior, which is presumed to be a combined mechanism of grain boundary diffusion and bulk diffusion. This is mainly ascribed to the retardant effect against the diffusion course by the sufficiently thick IMC layer that was initially formed during the reflow soldering.     

Effect of electric field on the vapor-phase growth of carbon nanostructures

A mathematical model of dc gas discharge plasma has been developed in order to determine the electric field strength at a substrate surface during plasmachemical deposition of carbon nanostructures. A numerical solution of the model equations has been obtained using the experimentally determined boundary conditions and model parameters. A comparison of the solution to experiment confirms the adequacy of the proposed mathematical model, which provides the electric field profiles and the electron and ion density distributions near the substrate surface. Estimations show that, for carbon nanostructures with a characteristic size of about 30 nm, the electric field strength at the surface is sufficiently high to provide for their directional growth along the field.     

Degradation of steels in the hulls of river ships

The surface corrosion of skin plates of the hulls of river ships is caused by the interaction of oxygen and hydrogen with the iron surface at the sites of damage to the protective lacquer coatings on the outer surface of the hull. The inner surface of the hull is subjected to the action of the condensates of water vapor with different degrees of acidity. Furthermore, near the fuel tanks, hydrogen-containing media (mainly, the hydrocarbon fuel) also affect the inner surface of the hull. As a result of hydrogenation, the plasticity of the skin plates of the fuel tanks sharply decreases, which is confirmed by the data of measurements of their impact toughness and microhardness, as well as by the results of microfractographic examinations. The contemporary hull plates subjected to thermomechanical treatment reveal a significant improvement of their plastic characteristics as compared with the requirements of the existing standard specifications. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 3, pp. 117–120, May–June, 2007.     

Risk evaluations for the courts: Is service quality a function of specialization?

Psychologists are often asked to testify in court. However, concerns have been expressed in both the legal and psychological literatures about the quality of these services. This article presents survey results comparing the practice patterns of generally licensed psychologists with those of specialist forensic diplomates in providing risk evaluations. Results suggest that general clinicians frequently perform these evaluations, but forensic diplomates use more modern risk instruments, are more aware of the scientific literature, and provide the court with more information about the scientific basis of their testimony. The implication of these results for legal professionals, psychologist training, and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)