Can digital rights management be standardized?

With increasing use of the Internet as a content-distribution platform, mere interoperability of the codec is no longer sufficient if content owners are not prepared to distribute their content online for fear of piracy. Therefore, one also needs interoperability in the area of managing and protecting related intellectual property rights. To provide interoperability of digital rights management (DRM) systems to protect the content rather than the distribution channel, MPEG has embarked on developing intellectual property management and protection (IPMP) specifications targeted at the content itself that are natively built into its standards. It is the hope that such standards will allow for interoperability of content commerce systems, giving consumers more choice, while providing rights holders with the tools to effectively protect their assets and to develop complex and attractive business offering to tempt consumers. While it remains uncertain whether standardization is in fact the right vehicle to provide the e-content market with an impetus to grow, it appears that MPEG is working on a set of specifications with relatively good chances of helping to achieve this goal.     

Low supply voltage high-performance CMOS current mirror with low input and output voltage requirements

This paper presents a scheme for the efficient implementation of a low supply voltage continuous-time high-performance CMOS current mirror with low input and output voltage requirements. This circuit combines a shunt input feedback and a regulated cascode output stage to achieve low input resistance and very high output resistance. It can be used as a high-precision current mirror in analog and mixed signal circuits with a power supply close to a transistor's threshold voltage. The proposed current mirror has been simulated and a bandwidth of 40 MHz has been obtained. An experimental chip prototype has been sent for fabrication and has been experimentally verified, obtaining 0.15-V input-output voltage requirements, 100-/spl Omega/ input resistance, and more than 200-M/spl Omega/ (G/spl Omega/ ideally) output resistance with a 1.2-V supply in a standard CMOS technology.     

Evanescently coupled photodiodes integrating a double-stage taper for 40-Gb/s applications-compared performance with side-illuminated photodiodes

The design, fabrication, and performance of double-stage taper photodiodes (DSTPs) are reported. The objective of this work is to develop devices compatible with 40-Gb/s applications. Such devices require high efficiency, ultrawide band, high optical power handling capability, and compatibility with low-cost module fabrication. The integration of mode size converters improves both the coupling efficiency and the responsivity with a large fiber mode diameter. Responsivity of 0.6 A/W and 0.45 A/W are achieved with a 6-/spl mu/m fiber mode diameter and cleaved fiber, respectively, providing relaxed alignment tolerances (/spl plusmn/1.6 /spl mu/m and /spl plusmn/2 /spl mu/m, respectively), compatible with cost-effective packaging techniques. DSTPs also offer a wide bandwidth greater than 40 GHz and transverse-electric/transverse-magnetic polarization dependence lower than 0.2 dB. Furthermore, a DSTP saturation current as high as 11 mA results in optical power handling greater than +10 dBm and a high output voltage of 0.8 V. These capabilities allow the photodiode to drive the decision circuit without the need of a broad-band electrical amplifier. The DSTP devices presented here demonstrate higher responsivities with large fiber mode diameter and better optical power handling capabilities and are compared with classical side-illuminated photodiodes.     

RF microelectronics for W-CDMA mobile communication systems

Third generation (3G) mobile communication systems are now just starting to be introduced. With a maximum data rate of 2 Mbit/s they will make wireless access to broadband data services like the Internet or video applications feasible. Most of the different physical layer technologies summarised under the acronym 3G are based on wideband-CDMA (W-CDMA), in contrast to existing second generation systems, which mostly use TDMA and FDMA. This has severe consequences for the design of the transceiver front-ends. During standardisation these were assumed to have an adequate RF performance yet they still present a performance bottleneck for the system. Starting with a short introduction to UMTS (Universal Mobile Telecommunications System)-the 3G standard to be deployed in Europe and already operating in Japan-this paper describes by way of example some of the test cases specified for UMTS and their impact on the analogue front-end. It is shown that accurate simulation of all the analogue and digital signal processing is necessary in order to predict the RF performance needed of today's commercial RFICs. The paper then presents and reviews some actual design examples. Finally, possible technologies and techniques for application in future mobile terminals are discussed     

High-temperature fibre Bragg grating thermometer

The use of gratings written in tin-doped silica fibres as a thermometer for high-temperature applications is described. Measurements up to ~800°C show a significant advantage over conventional fibre gratings. A considerable blue-shift has been observed at high temperatures. If corrections for blue-shift are taken into account, the errors are smaller than ~2°C     

On the comparison between OFDM and single carrier modulation with aDFE using a frequency-domain feedforward filter

Most comparisons between single carrier and multicarrier modulations assume frequency-domain linear equalization of the channel. We propose a new frequency-domain decision feedback equalizer (FD-DFE) for single carrier modulation, which makes use of a data block transmission format similar to that of the orthogonal frequency-division multiplexing with cyclic prefix (OFDM). The scheme is a nonadaptive DFE where the feedforward part is implemented in the frequency domain, while feedback signal is generated by time-domain filtering. Through simulations in a HIPERLAN-2 scenario, we show that FD-DFE yields a capacity very close to that of OFDM. This result is also confirmed by analytical derivations for a particular case. Furthermore, when no channel loading is considered, FD-DFE performs closely to OFDM for the same averaged frame error rate in a coded transmission. Design methods of the FD-DFE are investigated and a reduced complexity technique is developed, with the result that FD-DFE and OFDM have a similar computational complexity in signal processing     

Adaptive antenna system design for multi-element combining with transient interrupted channels

This paper presents an analysis and design procedure for a buoyant cable array antenna used for satellite communications. The towed multi-element array is susceptible to washovers and fluctuations due to the ocean wave interaction with the floating hose where the elements are housed. A model of system performance for coherent multi-element combining is presented based on the dropouts and fades of the individual elements. The array design, including the number and spacing of elements, is shown to be highly dependent on the individual element exposure characteristics and the degree of correlation of the fades between channels. The joint statistics of the array are analyzed using a binary conditional element exposure model and a first-order Markov interelement correlation model. Using this analysis, a family of array designs meeting the communications requirements is produced.     

Improvement in the DOA estimation of broadband signals usingpartially IIR beamformers

An ideal broadband beamformer requires an increased number of taps for each filter, which in turn increases the complexity of the design. It is shown that for angles near the broadside of the antenna the beamforming is more accurate compared to the angles near the endfire, and it is advantageous to use recursive filters combined with a computed number of zeros for angles near the endfire. The proposed method is used for estimating the arrival angle of the incoming signals and displays uniform accuracy for all angles     

Analysis of transient interaction of electromagnetic pulse with an air layer in a dielectric medium using wavelet-based implicit TDIE formulation

The interaction of transient electromagnetic pulse with an air layer in a dielectric medium is formulated in terms of a time-domain integral equation and solved numerically via the method of moments. Previous related works pointed to the inherent inadequacy of the marching-on-in-time method in this case, but suggested no remedy. This paper explains why an implicit modeling scheme would work effectively in this case. It is also noted that the use of an implicit scheme would normally involve a solution of a very large and dense matrix equation. To alleviate this drawback of the implicit scheme, the use of a wavelet-based impedance-matrix-compression technique, which has facilitated in the very recent past solutions of time-domain problems with greater efficiency, is described.     

LiNbO3 optical waveguides formed in a new proton source

Proton-exchanged planar waveguides have been fabricated on Z-cut and X-cut lithium niobate crystals by using a new proton source formed by a mixture of benzoic and adipic acids. Waveguide index profiles and optical characteristics have been obtained at different values of the adipic-benzoic acid concentration ratio. The samples have been structurally characterized by Raman and infrared (IR) absorption spectroscopy and double-crystal X-ray diffraction. Good quality samples have been fabricated by using 30 mol% ratio dilution, showing very low scattering levels (<0.1 dB/cm), relatively high electrooptic coefficient (r₃₃=0.88 pm/V), and low relative percentage of interstitial protons (26%). The main factor limiting the waveguide optical properties is the substitutional-interstitial proton ratio, which can be easily controlled to produce good quality waveguides. A demonstration of the repeatability of the exchange process in the acid mixture is also provided