Effect of rotor profiles on the torque of a switched-reluctancemotor

The authors examine effects on the torque that simple variations of the standard rotor pole face profile could have, basically from an elementary viewpoint of how the modified profiles affect the distribution and magnitude of the radial and tangential components of the flux density. It is observed that the average torque is mostly affected by changes that alter the dominant radial component, such as changes in the effective air gap length. The other observation that an increase in the average torque can also be obtained by a favorable shift in the torque versus angle characteristics by relatively simple changes of the rotor pole profile is not so well known. Such a shift that reduces the slope of the torque angle characteristic, skewing the curve towards the unaligned position, has two advantages: one is that the phase inductance is at its maximum positive slop and, hence, the maximum torque, when the phase is energized; second, the flatter inductance profile near the aligned position when the phase current is to be commutated would allow a faster drop off of the commutated current and, thus, a smaller negative torque     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Central sleep apnea

A central sleep apnea is the absence of respiratory effect, and, thus, the absence of airflow during sleep. Central hypopnea, a related disorder, is also discussed. The sensory component of central sleep apnea; defects involving the integrative and executive neurons; non-neurologic causes of central sleep apneas, including chronic obstructive pulmonary disease and congestive heart failure; diagnosis; treatment; and other topics are reviewed in detail.     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Tablet Excipients to the Year 2001: A Look into the Crystal Ball

The future for tablet excipients is reviewed from a number of viewpoints: new materials, formulation development, quality, regulatory aspects, logistics, and production. The field of excipients is changing rapidly in response to economic, regulatory, and scientific pressures. As our understanding of drug delivery improves, so will the demands we place on excipients and on their quality, both chemical and functional. In order to fully optimize drug delivery systems, a better understanding of excipients and their properties and limitations is required. The materials science approach to the study of excipients will help to increase our understanding of excipients and how best to use them. But excipients are only one part of the very complex mechanism whereby new medicinal products are brought to the marketplace. It is important that the processes of formulation design and development are properly integrated to obtain optimized drug delivery systems as early as possible. Developments in related fields such as manufacturing technology, logistics, and analytical techniques will also influence the field of excipients.     

Multi-emitter Si/GexSi1-x heterojunctionbipolar transistor with no base contact and enhanced logic functionality

We demonstrate multi-emitter Si/Ge_xSi_1-x n-p-n heterojunction bipolar transistors (HBT's) which require no base contact for transistor operation. The base current is supplied by the additional emitter contact under reverse bias due to the heavy doping of the emitter-base junction. Large-area HBT test structures exhibit good transistor characteristics, with current gain β≈400 regardless of whether the base current is supplied by a test base electrode or one of the emitter contacts. These devices have enhanced logic functionality because of emitter contact symmetry. Since device fabrication does not require base electrode formation, the number of processing steps can be reduced without significant penalty to HBT performance     

Development of contrast sensitivity and temporal-frequency selectivity in primate lateral geniculate nucleus

We studied the development of spatial contrast-sensitivity and temporal-frequency selectivity for neurons in the monkey lateral geniculate nucleus. During postnatal week 1, the spatial properties of P-cells and M-cells are hardly distinguishable, with low contrast-sensitivity, sluggish responses, and poor spatial resolution. The acuity of P-cells improves progressively until at least 8 months, but there is no obvious increase in their maximum contrast-sensitivity with age. The contrast sensitivity of M-cells is already clearly higher than that of P-cells by 2 months, and at 8 months of age this characteristic difference between M- and P-cells approaches the adult pattern. There is a major increase in responsiveness during the first 2 postnatal months, especially for M-cells, the peak firing rate of which rises fivefold, on average, between birth and 2 months. Many P-cells in the neonatal and 2-month-old animals did not give statistically reliable responses to achromatic gratings, even at the highest contrasts: this unresponsiveness of P-cells might result from low gain and/or chromatic opponency. The upper limit of temporal resolution in the neonate is low--about one-third of that in the adult. Among M-cells, the improvement in temporal resolution, like that in contrast sensitivity, is rapid over the first 2 months, followed by a slower change approaching the adult value by 8 months of age. The development of contrast sensitivity, responsiveness and temporal tuning are little affected, if at all, by binocular deprivation of pattern vision from birth for even a prolonged period.