Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

Guaranteed inclusions for the complex generalized eigenproblem

A method is described which produces guaranteed bounds for a solution of the generalized complex eigenproblem. The method extends a similar approach for general systems of nonlinear equations to the special case of complex pencils, where under weaker assumptions stronger assertions can be proved.     

Solar duct for lighting and ventilation Santa Amalia building Barcelona -Spain

The Santa Amalia building in Barcelona is a block of six flats incorporating a duct by which ligth is sent to the kitchens - previously without natural ligthing- and also allows natural ventilation. Moreover, the passive solar gains obtained from the extensive glazed surfaces and the conservation of internal heat gains, along with a high degree of isulation, give energy saving of 68% for heating.     

Reactive energy measurement using frequency controlled analog-to-pulse-rate converter

Contents This paper analyzes a problem of phase shifting and deseribes a novel method for electronic reactive energy measurement. The proposed measurement structure, composed of an integrator as a phase shifting circuit and a frequency controlled analog-to-pulse-rate converter, provides for the measurement completely in accordance with IEC definition of reactive energy, which is performed with simple but high performance metering device.

---

Die Blindverbrauchsmessung anhand eines netzsynchronisierten Analog-Frequenz-Wandlers

Übersicht In diesem Artikel wird das Problem der Phasenverschiebung analysiert und eine neue Meßmethode für elektronische Blindverbrauschsmessung aufgezeigt. Die vorgeschlagene Strucktur, bestehend aus einem Integrator als Phasenschieber und netzkontrolliertem Analog-Frequenz-Wandler, ermöglicht die Verwirklichung eines einfachen aber präzisen Elektrizitätszählers zur Messung der Blindenergie, dessen Arbeitsprinzip mit den IEC Empfehlungen vollkommen übereinstimmt.

     

Twisted axially loaded rod with shear and compressibility

Summary Stability of a twisted and axially compressed elastic rod is analysed using the Euler method of adjacent equilibrium configuration. The constitutive equations of the rod are assumed in the form that takes into account both shear of the cross-sections and compressibility of the rod axis. It is shown that bifurcation points of the non-linear system of equations describing equilibrium are determined from the linearized system of equations. The influence of shear and compressibility on the critical values of twisting couple and compressive force is obtained. Moreover, the bifurcation pattern is examined by using the Liapunov-Schmidt method.     

On simulation methods for solving the Boltamann equation

We will give an overview of the problem and then show how to modify an already present algorithm, so that it is also useful from a practical point of view. Further we will show that this algorithm is suitable for parallel computing and prove by means of an example that it can compete with the Bird algorithm, which is almost always applied by engineers but has only a heuristic base.     

Relation between hardness and compressive strength of polymer concrete

Experimental studies were made of the influence of mixing and casting techniques and of curing time upon the compressive strength and hardness of methyl methacrylate based polymer concrete. The Rockwell K and F scales were found to be suitable for the hardness determinations. Over a wide range of hardness and strength values, the average compressive strength (f_c) varied linearly with the average hardness (R_K) according to the relation f_c (psi) = 560 R_K - 12000, irrespective of casting and curing variables. The weaker materials exhibited greater variations in hardness. Hardness testing is found to provide a meaningful and convenient method for evaluating the quality of polymer concrete.     

Thermal expansion behavior of various aromatic polyimides

The thermal expansion behavior for various aromatic polymides was investigated. Usally polymers, including polyimides, have high thermal expansion coefficients (3–6 × 10^?5 K^?1), compared with metals and ceramics. However, there are some polyimides which have very low thermal expansion coefficients below 1 × 10^?5 K^?1. This property was observed for the polymides obtained from pyromellitic dianhydride or 3,3′ 4,4′-biphenyltetracarboxylic dianhydride and aromatic diamines which were constituted of only benzene rings fused at para positions. It was proposed that their low thermal expansion coefficient related to the linearity in their polymer molecular skeltons.     

INTEGER analysis of two-dimensional polygonal objects

A consistent modelling scheme for digital images is presented, with the grey-level raster image as input and the list-oriented polygonal image as output. The output information consists of two parts: The metric of the polygonal object, represented by coordinates of marked positions, and the global topology, which takes the form of a two-dimensional topologic order. The central problem, which has to be solved, is to select a digital polygon, approximating a digital arc such that the essential feature of the arc is represented at a predefined precision level. The proposed algorithm uses simple incremental calculations of INTEGER quantities to solve the problem.