A study of the effect of stiffness distribution on nonlinear seismic response of multi-degree-of-freedom structures

The ductility requirement of elastoplastic multi-d.o.f. shear structures is studied by analysing the response obtained through step-by-step integration of the equations of motion for some recorded accelerograms. In view of the high dependence of the structural strength reserve beyond the elastic range on the distribution of plastic deformations in the structure, this paper aims to establish the influence of the stiffness distribution and of the earthquake features on the local ductility demand. Attention is also paid to the analysis of the influence of variation in excitation intensity and duration on the seismic behaviour of the structural models considered. Numerical results show that overall structural ductility alone is not sufficiently representative to evaluate the ultimate state of multi-d.o.f. structures. Local ductility must also be specified in order to create a reliable aseismic design. In this context, the important role played by the distribution of stiffness over the structure is emphasized.     

Interaction of bacteriophage R17 and reovirus type III with the clay mineral allophane

A study has been made of the adsorption of bacteriophage R17 and reovirus type 3 by the amorphous aluminosilicate clay mineral allophane. In agreement with previous studies of virus adsorption to other minerals such as montmorillonite and aluminium hydroxide, the principal factors influencing adsorption were found to be mixing time, pH and the concentrations and isoelectric points of both the virus and the absorbent. However, allophane was found to be a much better adsorbent for reovirus and R17 over the pH range 5–7, the natural pH range of many fresh waters.By using highly purified radioactive reovirus it was possible to follow both the distribution of radioactive virus in a clay suspension and the specific infectivity of the virus. This study revealed that when adsorbed virus was eluted by neutral phosphate solutions it retained its physical integrity but was of a lower specific infectivity.     

Chloroaromatic formation in incineration processes

The high-temperature reactions of chlorinated hydrocarbons are reviewed with a primary focus on the gas-phase molecular growth chemistry and elementary reaction mechanisms leading to the formation of chlorinated benzenes and chlorinated polycyclic aromatic hydrocarbons. Recent heterogeneous mechanistic studies of the chlorination and condensation of aliphatic hydrocarbons at lower temperatures are also summarized. Copper(II) valent species play an important role as catalyst and reagent. The main thermal pathways for chlorinated dibenzodioxins and furans have been deduced by these laboratory experiments, which try to model the complex reality of the post-incineration zone of municipal and hazardous waste incinerators.     

Procedure for predicting settlements of thawing bases for engineering calculations

It was shown that in order to compute the settlement of thawing cohesive soil under a load in time it is necessary to experimentally determine the consolidation coefficient. A procedure is suggested for determining this coefficient, as well as use of the classical solution of a differential equation for seepage consolidation to describe the settlement of soil, thawing of which can occur according to any law.State All-Union Scientific Research Institute of Roads. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 5–7, July–August, 1993.     

A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Indirect check of aggregate pore effects on concrete

It is very difficult to quantify aggregate pores directly in a way that allows pore/water interaction to be accurately related to hardened concrete properties. This work examines, a number of aggregates through water absorption checks and gives results of tests on some concretes made with them. Three especially relevant concrete properties are examined, initial surface absorption, freeze/thaw behaviour and drying shrinkage; it is shown that aggregate absorption is reflected in these properties.     

Effect of chlorination practice on soluble organics

As the practice of chlorination for the disinfection of waste effluents is apparently to be extended, this study was initiated to examine the possibility that chlorinated organics could be formed in the disinfection process. A group of pure compounds that had been demonstrated to be susceptible to chlorination were examined under conditions likely to apply under normal disinfection practice.From the results obtained, it appears only organics with ring structures and electron activating substituents, or amino groupings are capable of chlorination. The frequent presence of ammonia or amino groups means that chloramine formation with its asociated toxicity is likely. However, the presence of ammonia or amino groups will retard the reaction with other compounds making chlorination of these unlikely.     

Conceptual aspects of water re-use

A simplified model of a municipal water recycle system is presented and gives a clear picture of the relationship between process variables such as the intensity of the treatment, the accumulation of pollutants and the number of times the water is re-used. The model can be used to determine the necessary requirements for the treatment process in order to reach a certain desired drinking water quality. This model is extended to cover a variety of practical conditions. It is also shown that accumulation under practical conditions is limited, even if there is no treatment. The model predicts that the recycle system can utilise a low quality supplementary supply, e.g. brackish water. Although the model is derived for a recycle system for domestic water supply it can be used for any closed loop water system.     

Lead in glasgow street dirt and soul

The levels of lead in city street dirt and in soil from various locations in Glasgow were investigated during spring 1976. Lead concentrations in street dirt ranged from 150–2300 ppm, mean 960 ppm, and were significantly elevated with respect to the observed “natural” level of 78 ppm. Lead derived from anti-knock compounds in petrol and introduced to the environment via automobile exhausts was clearly implicated as the main source of lead pollution in a series of soil lead measurements at the centre and periphery of eight Glasgow parks.Various chemical leaching techniques were employed and compared. Less than 5% of street dirt and soil lead was found to be associated with the organic phase.     

The relative influence of wind,sunlight and temperature on user comfort in urban outdoor spaces

This paper presents the development of a comfort index that measures adaptivity in outdoor spaces. Over a 9-month period 649 people were surveyed in three locations, in temperatures between 10 and 28 °C. An exploratory factor analysis develops a 15-item scale of comfort that includes measures of adaptivity: clothing, exposure time and seating location. The scale is regressed on physical measures: average instantaneous wind speed; maximum wind speed; mean-exposed radiant temperature; mean-shaded radiant temperature and ambient temperature. The results model the relative contributions of the microclimatic factors for the comfort in the outdoor space. Analyses suggest gustiness and wind speed are most important in determining user satisfaction. There is strong support for the theory that people actively adapt to microclimatic conditions.