Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

Law,liability and expert systems

This paper examines some of the possible legal implications of the production, marketing and use of expert systems. The relevance of a legally useful definition of expert systems, comprising systems designed for use both by laymen and professionals, is related to the distinctions inherent in the legal doctrine underlying provision of goods and provision of services. The liability of the sellers and users of, and contributors to, expert systems are examined in terms of professional malpractice as well as product liability. A recurring theme indicates that legislators may be inclined to restrict possibilities of liability suits in order to avoid disincentives to the creation of expert systems.     

Phase Shifter for a 915 MHz Phased Array Hyperthermia System

This paper describes a design for an analog phase shifter operating at 915 MHz and suitable for use in a phased array microwave hyperthermia system. Here, the major operating constraint was minimization of amplitude variation over a 1800 phase shift, whereas previous phase shifters were designed to obtain a linear relationship between phase and control voltage. The result is a simple, inexpensive hybrid coupler phase shifter that operates over a narrow bandwidth and provides 180°of continuous phase shift with input powers up to 1 W.     

Optimal characteristic polynomials for digital multistep pseudorandom numbers

The digital multistep method generates uniform pseudorandom numbers by transforming sequences of integers obtained by multistep recursions. The statistical independence properties of these pseudorandom numbers depend on the characteristic polynomial of the recursion. We describe a method of calculating characteristic polynomials that are optimal with respect to statistical independence of pairs of successive pseudorandom numbers. Tables of such optimal characteristic polynomials for degrees ≤64 are included.     

Biaxiale Ermüdung reibrührgeschweißter Strukturelemente

Biaxial fatigue of friction stir welded stiffened panels Within the framework of the European WelAir project, cruciform specimens made from stiffening FSW overlap joints were fatigued in the DLR biaxial test rig. To resemble the loading situation of pressurized fuselage structures, proportional loading without any phase shift, but with different load ratios λ between the loading components in both directions was applied.Natural crack initiation and subsequent crack growth were governed by the stiffness gradient caused by introducing the stringer. Cracks initiated and propagated at run‐in and run‐out locations in a direction perpendicular to the weld seam. The shortest fatigue life was observed for uniaxial loading in welding direction (λ = 0). An additional stress component perpendicular to the joint line (λ > 0) resulted in a higher number of cycles to failure. Similar to single stringer panels, increasing the load ratio also increased the number of cycles to failure for FSW clip‐stringer structural members, but additionally gives a different location of the fatal crack.     

Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.     

One Hundred Years of Social Psychology Quantitatively Described.

This article compiles results from a century of social psychological research, more than 25,000 studies of 8 million people. A large number of social psychological conclusions are listed alongside meta-analytic information about the magnitude and variability of the corresponding effects. References to 322 meta-analyses of social psychological phenomena are presented, as well as statistical effect-size summaries. Analyses reveal that social psychological effects typically yield a value of r equal to .21 and that, in the typical research literature, effects vary from study to study in ways that produce a standard deviation in r of .15. Uses, limitations, and implications of this large-scale compilation are noted. (PsycINFO Database Record (c) 2010 APA, all rights reserved)