Gronwall inequality for hybrid systems

The Gronwall inequality, a well-known and useful result both for continuous-time and discrete-time signals, is extended to hybrid signals, namely those that combine continuous time and discrete time. An application of the result to establishing a bounded energy bounded state property for hybrid systems with inputs is provided.     

Determination of 200 °C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis,X-ray Diffraction,Hardness and Electrical Conductivity Measurements

Ternary Al-Ag-Ga system at 200 °C was experimentally and thermodynamically assessed. Isothermal section was extrapolated using optimized thermodynamic parameters for constitutive binary systems. Microstructure and phase composition of the selected alloy samples were analyzed using light microscopy, scanning electron microscopy combined with energy-dispersive spectrometry and x-ray powder diffraction technique. The obtained experimental results were found to be in a close agreement with the predicted phase equilibria. Hardness and electrical conductivity of the alloy samples from four vertical sections Al-Ag₈₀Ga₂₀, Al-Ag₆₀Ga₄₀, Ag-Al₈₀Ga₂₀ and Ag-Al₆₀Ga₄₀ of the ternary Al-Ag-Ga system at 200 °C were experimentally determined using Brinell method and eddy current measurements. Additionally, hardness of the individual phases present in the microstructure of the studied alloy samples was determined using Vickers microhardness test. Based on experimentally obtained results, isolines of Brinell hardness and electrical conductivity were calculated for the alloys from isothermal section of the ternary Al-Ag-Ga system at 200 °C.     

Aerodynamic design and analysis of a small-scale vertical axis wind turbine

Small-scale vertical axis wind turbines are regarded today as an attractive source of green energy, still insufficiently implemented and tested. This paper presents a fast design methodology of such a VAWT, in terms of choosing its main parameters: airfoil, rotor diameter and solidity. For obtaining generated power of each considered geometrical model at different undisturbed wind velocities and rotor angular velocities two models were used — momentum and vortex-wake model, combined with experimentally measured airfoil data (airfoil lift and drag coefficients). Even though the former model is simpler, it is the most utilized model, known to provide good results in stationary working regimes. Both models still present fairly accurate and fast tools for computation and optimization, particularly useful in the phase of conceptual design. In this research, the use of the momentum model resulted in determination of the maximal power coefficient, optimal- and minimal freestream velocity for every considered VAWT model. From these output parameters, a selection of the optimal geometric model was done, and a more detailed transient analysis and flow representation around the selected solution was obtained by the vortex-wake model. The results obtained by the two used computational models coincide satisfactorily.     

Sorption/release of diclofenac sodium in/from free‐standing poly(acrylic acid)/poly(ethyleneimine) multilayer films

Polyelectrolyte multilayer films deposited onto various substrates have been used extensively as drug delivery systems. However, little attention has been paid to the release of drugs from free‐standing polymeric films. Herein, we report the construction of thermal crosslinked free‐standing poly(acrylic acid) (PAA)/branched poly(ethyleneimine) (PEI) multilayer films composed of 25 double layers [(PAA/PEI)₂₅] and their use in sorption/release of diclofenac sodium (DS). The (PAA/PEI)₂₅ multilayer films were characterized by scanning electron microscopy, potentiometric titrations and Fourier transform infrared spectroscopy, while the sorption/release of DS was monitored by UV – Vis spectroscopy. The DS sorption equilibrium data were fitted with five isotherm models (Langmuir, Freundlich, Sips, Dubinin–Radushkevich, and Temkin). The maximum equilibrium sorption capacity, q_m, given by the Langmuir model was 32.42 mg DS/g. The Korsmeyer–Peppas semiempirical equation showed that the release of DS from the free‐standing (PAA/PEI)₂₅ films proceeded by pseudo‐Fickian diffusion, irrespective of the releasing media. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43752.     

Electrochemical impedance spectroscopy and corrosion behaviour of Al2O3-Ni nano composite coatings

In this paper, the results on the electrochemical impedance spectroscopy and corrosion properties of electrodeposited nanostructured Al₂O₃-Ni composite coatings are presented. The nanocomposite coatings were obtained by codeposition of alumina nanoparticles (13 nm) with nickel during plating process. The coating thickness was 50 μm on steel support and an average of nano Al₂O₃ particles inside of coatings at 15 vol.% was present. The structure of the coatings was investigated by scanning electron microscopy (SEM). It has been found that the codeposition of Al₂O₃ particles with nickel disturbs the nickel coating's regular surface structure. The electrochemical behavior of the coatings in the corrosive solutions was investigated by polarization potentiodynamic and electrochemical impedance spectroscopy methods. As electrochemical test solutions 0.5 M sodium chloride and 0.5 M potassium sulphate were used in a three electrode open cell. The corrosion potential is shifted to more negative values for nanostructured coatings in 0.5 M sodium chloride. The polarization resistance in 0.5 M sodium chloride decreases in 24 h, but after that increases slowly. In 0.5 M potassium sulphate solution the polarization resistance decreases after 2 h and after 30 h of immersion the polarization resistance is higher than that of the beginning value. The corrosion rate calculated by polarization potentiodynamic curves obtained after 30 min from immersion in solution is smaller for nanostructured coatings in 0.5 M potassium sulphate (4.74 μm/year) and a little bit bigger in 0.5 M sodium chloride (5.03 μm/year).     

Robustness of quantized control systems with mismatch between coder/decoder initializations

This paper analyzes the stability of linear systems with quantized feedback in the presence of mismatch between the initial conditions at the coder and decoder. Under the assumption of the perfect channel, we show that using the scheme proposed in [Liberzon, D., & Neši?, D. (2007). Input-to-state stabilization of linear systems with quantized state measurements. Institute of Electrical and Electronic Engineers Transaction on Automatic Control, 52, 767-781] it is possible to achieve stability with exponential convergence of linear systems with quantized feedback when the coder and decoder are initialized at different initial conditions.     

Summarizing transactional databases with overlapped hyperrectangles

Transactional data are ubiquitous. Several methods, including frequent itemset mining and co-clustering, have been proposed to analyze transactional databases. In this work, we propose a new research problem to succinctly summarize transactional databases. Solving this problem requires linking the high level structure of the database to a potentially huge number of frequent itemsets. We formulate this problem as a set covering problem using overlapped hyperrectangles (a concept generally regarded as tile according to some existing papers); we then prove that this problem and its several variations are NP-hard, and we further reveal its relationship with the compact representation of a directed bipartite graph. We develop an approximation algorithm Hyper which can achieve a logarithmic approximation ratio in polynomial time. We propose a pruning strategy that can significantly speed up the processing of our algorithm, and we also propose an efficient algorithm Hyper+ to further summarize the set of hyperrectangles by allowing false positive conditions. Additionally, we show that hyperrectangles generated by our algorithms can be properly visualized. A detailed study using both real and synthetic datasets shows the effectiveness and efficiency of our approaches in summarizing transactional databases.     

The master sintering curves for BaTi0.975Sn0.025O3/BaTi0.85Sn0.15O3 functionally graded materials

The most important aim in the design and processing of functionally graded materials (FGMs) is to produce devices free from any deformation. Smart choices of different combination of graded layers, as well as the heating rate during sintering, are important for the fabrication of high-quality FGMs. In this study, BaTi_0.975Sn_0.025O₃/BaTi_0.85Sn_0.15O₃ (noted as BTS2.5 and BTS15, respectively) FGM was used as a model system for the construction of master sintering curves (MSCs) and estimation of the effective activation energies of sintering for different BTS graded layers. The MSCs were constructed, for BTS2.5 and BTS15 graded layers in FGMs, using shrinkage data obtained by a heating microscope during sintering at four constant heating rates, 2, 5, 10 and 20 °/min. The effective activation energies were determined using the concept of MSC; values of 359.5 and 340.5 kJ/mol were obtained for graded layers BTS2.5 and BTS15, respectively. A small difference of the effective activation energies of chosen powders made it possible for us to prepare high-quality FGMs, without delamination, distortion or other forms of defects.     

A class of non-canonic,driving-point immittance realizations of passive,common-ground,transformerless, two-element-kind RLC networks

A new class of non-canonic, driving-point immittance realizations of passive, common-ground, transformerless, two-element-kind RLC networks with minimum number of nodes is presented. Six new algorithms of realization are developed by application of canonic, orthogonal matrix transformations with reduced number of degrees of freedom. the number of applied RLC elements of one kind can be minimized and of the other kind reduced, while their parameter values are calculated directly in a linear way.     

A Genetic Programming Approach to Rainfall-Runoff Modelling

Planning for sustainable development of water resources relies crucially on the data available. Continuous hydrologic simulation based on conceptual models has proved to be the appropriate tool for studying rainfall-runoff processes and for providing necessary data. In recent years, artificial neural networks have emerged as a novel identification technique for the modelling of hydrological processes. However, they represent their knowledge in terms of a weight matrix that is not accessible to human understanding at present. This paper introduces genetic programming, which is an evolutionary computing method that provides a transparent and structured system identification, to rainfall-runoff modelling. The genetic-programming approach is applied to flow prediction for the Kirkton catchment in Scotland (U.K.). The results obtained are compared to those attained using two optimally calibrated conceptual models and an artificial neural network. Correlations identified using data-driven approaches (genetic programming and neural network) are surprising in their consistency considering the relative size of the models and the number of variables included. These results also compare favourably with the conceptual models.