Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.     

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties

Polyethylene-layered silicate nanocomposites were prepared by the in situ intercalative polymerization of ethylene by the so-called polymerization-filling technique and analyzed by transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Non-modified montmorillonite and hectorite were first treated by trimethylaluminum-depleted methylaluminoxane before being contacted by a Ti-based constrained geometry catalyst. The nanocomposite was formed by addition and polymerization of ethylene. In the absence of a chain transfer agent, ultra high molecular weight polyethylene was produced. The tensile properties of these nanocomposites were poor and essentially independent of the nature and content of the silicate. Upon hydrogen addition, the molecular weight of the polyethylene was decreased with parallel improvement of the tensile and shear moduli, in relation to the filler content. The exfoliation of the layered silicates was confirmed by XRD analysis and TEM observation. The mechanical kneading of the molten nanocomposites resulted in the partial collapse of the exfoliated structure driven by the thermodynamic stability of the layered filler.     

Acoustic emission monitoring of uniaxial pressing of ceramic powders

Powder compaction is a critical step in a classical method for the production of zero-defect ceramic products. We have studied the development of this step to determine whether acoustic emission can be used to detect the presence of flaws in a compact. In uniaxial pressing at room temperature, the creation and extension of flaws occur principally during the ejection of the compacts. The type and extent of flaws depend on the mechanical properties of the powder used and on the pressing conditions. Acoustic emission was used to monitor the consolidation by uniaxial pressing of Al₂O₃ powders and a UO₂---PuO₂ powder. It was possible to detect flaws in the compacts, to determine their type for a given powder, and to identify the type of powder used by a direct examination of cumulative counts of acoustic emission events and by a statistical analysis of amplitude distributions. Hence, the introduction of this technique in a fabrication process offers the possibility of detecting the presence of defects in compacts as soon as they are created. This would decrease the difficulties involved in reuse in the process of the powder from defective products, and would limit further flaw development during sintering, which are two major problems in the nuclear industry.     

Oxidation Kinetics of Carbon Deposited on Cerium‐Doped FePO4 during Dehydration of Glycerol to Acrolein

A cerium‐doped FePO₄ catalyst dehydrates glycerol to acrolein in the gas phase but carbon accumulation reduces the reaction rate with time. Reaction rates may be maintained for longer times by co‐feeding low concentrations of oxygen together with the glycerol, but the acrolein yield drops proportionally to the oxygen concentration. The catalyst is easily regenerated by air and the reaction rate is proportional to both the oxygen concentration and quantity of carbon. The carbonaceous deposits may be due to both glycerol and acrolein: when either is fed to the catalyst, the CO₂/CO ratio is close to 1; during the regeneration step, the CO₂/CO ratio is near 4. A kinetic model of first order in both oxygen concentration and adsorbed sites characterizes the transient data very well.     

Synthesis and Anticancer Properties of Oxazepines Related to Azaisoerianin and IsoCoQuines

In this article, we report the synthesis and biological properties of a series of novel oxazepines related to isoCA-4 having significant antitumor properties. Among them, three oxazepin-9-ol derivatives display a nanomolar or a sub-nanomolar cytotoxicity level against five human cancer cell lines (HCT116, U87, A549, MCF7, and K562). It was demonstrated that the lead compound in this series inhibits tubulin assembly with an IC₅₀ value of 1 μM and totally arrests the cellular cycle in the G2/M phase at the low concentration of 5 nM in HCT116 and K562 cells. Molecular modeling studies perfectly corroborates these promising results.     

Design of New Cardanol Derivative: Synthesis and Application as Potential Biobased Plasticizer for Poly(lactide)

A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by ¹H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.

     

Hydrolytic degradation of poly(l‐lactic acid)/poly(methyl methacrylate) blends

The hydrolytic degradation of poly(l ‐lactic acid)/poly(methyl methacrylate) (PLLA/PMMA) blends was carried out by the immersion of thin films in buffer solutions (pH = 7.24) in a shaking water bath at 60 °C for 38 days. The PLA/PMMA blends (0/100; 30/70; 50/50; 70/30; 100/0) were obtained by melt blending using a Brabender internal mixer and shaped into thin films of about 150 µm in thickness. Considering that PMMA does not undergo hydrolytic degradation, that of PLLA was followed via evolution of PLA molecular weight (recorded by size exclusion chromatography), thermal parameters (differential scanning calorimetry (DSC)) and morphology of the films (scanning transmission electron microscopy). The results reveal a completely different degradation pathway of the blends depending on the polymethacrylate/polyester weight ratio. DSC data suggest that, during hydrolysis at higher PMMA content, the polyester amorphous chains, more sensitive to water, are degraded before being able to crystallize, while at higher PLLA content, the crystallization is favoured leading to a sample more resistant to hydrolysis. In other words, and quite unexpectedly, increasing the content of water‐sensitive PLLA in the PLLA/PMMA blends does not mean de facto faster hydrolytic degradation of the resulting materials. © 2018 Society of Chemical Industry     

Encapsulation of nanoparticles by polymerization compounding in a gas/solid fluidized bed reactor

For the first time, a fluidized bed reactor was used for encapsulating nanoparticles by the polymerization compounding approach using Ziegler–Natta catalysts. The polymerization reaction was carried out using a solvent-free process in a gas-phase reactor. This direct gas–solid reaction greatly simplified collecting the particles of interest after polymerization because none of the extra steps often found in encapsulation processes, such as filtering and drying, were performed in this work. The grafting of the catalyst to the original surface of particles was confirmed by X-ray photoelectron spectroscopy. Micrographs obtained by transmission electron microscopy confirmed the presence of a thin layer of polymer, in the order of a few nanometers, around the particles. The thickness of this coating was affected by the operating conditions of the process. The characterization of the modified particles with electron microscopy also revealed that zirconia nanoparticles tend to be coated in an agglomerated state, whereas aluminum particles were mostly individually encapsulated by the polymer. In addition, the effects of temperature and pressure were studied on the encapsulation process and a kinetic analysis was presented based on the available models in the literature. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Transport properties of organic vapours in silicone/clay nanocomposites

Poly(dimethylsiloxane) (PDMS)/clay nanocomposites have been synthesized using a novel ω-ammonium functionalized oligo-PDMS surfactant (PDMS-N⁺(CH₃)₃) and processed in membrane form. In order to relate the clay morphological structure to the degree of dispersion and physical properties of the membrane, the clay ion-exchanged by PDMS-N⁺(CH₃)₃ has been compared to a non-exchanged sodium MMT and to two organoclays organo-modified by using either non-functional alkyl ammonium cations (C₃₈H₈₀N⁺) or hydroxyalkyl ammonium (C₂₂H₄₈ON⁺) cations. Morphological analysis and transport properties (sorption, diffusion and permeability) have been investigated using two penetrants: acetone and n-hexane. The mechanical and rheological properties of the PDMS nanocomposite membranes have also been studied. It has been found a significant effect of the clay organo-modifier on the morphology, physical and barrier properties of the systems.     

Role of Orai3 in the Pathophysiology of Cancer

The mammalian exclusive Orai3 channel participates in the generation and/or modulation of two independent Ca²⁺ currents, the store-operated current, I_crac, involving functional interactions between the stromal interaction molecules (STIM), STIM1/STIM2, and Orai1/Orai2/Orai3, as well as the store-independent arachidonic acid (AA) (or leukotriene C4)-regulated current I_arc, which involves Orai1, Orai3 and STIM1. Overexpression of functional Orai3 has been described in different neoplastic cells and cancer tissue samples as compared to non-tumor cells or normal adjacent tissue. In these cells, Orai3 exhibits a cell-specific relevance in Ca²⁺ influx. In estrogen receptor-positive breast cancer cells and non-small cell lung cancer (NSCLC) cells store-operated Ca²⁺ entry (SOCE) is strongly dependent on Orai3 expression while in colorectal cancer and pancreatic adenocarcinoma cells Orai3 predominantly modulates SOCE. On the other hand, in prostate cancer cells Orai3 expression has been associated with the formation of Orai1/Orai3 heteromeric channels regulated by AA and reduction in SOCE, thus leading to enhanced proliferation. Orai3 overexpression is associated with supporting several cancer hallmarks, including cell cycle progression, proliferation, migration, and apoptosis resistance. This review summarizes the current knowledge concerning the functional role of Orai3 in the pathogenesis of cancer.