An Investigation of Information Systems Interoperability in UK Universities: Findings and Recommendations

This article reports on the key findings and implications of the Joint Information Systems Committee (JISC)-funded Online Catalogue and Repository Interoperability Study (OCRIS), a 3-month project which investigated the interoperability of Online Public Access Catalogues (OPACs) and Institutional Repositories (IRs) within UK universities. A series of detailed recommendations enumerate some of the ways in which they might begin to develop and support an interoperable systems landscape to the benefit of all key stakeholders.

The project combined quantitative and qualitative research methods including an online questionnaire distributed to staff within 85 universities, desk research, and two case studies conducted at the Universities of Cambridge and Glasgow.     

,,Location-based Services“ – Personalisierung mobiler Dienste durch Verortung

Zusammenfassung Im Zeitalter der Informationsgesellschaft, so wurde postuliert, spielten r?umliche Distanzen keine Rolle mehr und unsere r?umliche Mobilit?t n?hme ab. Die Mobilit?t in den letzten Jahren, speziell die Freizeitmobilit?t, hat hingegen zugenommen. Die Bereitstellung ortsbezogener Dienste – ,,Location-based Services“ – unterstützt und f?rdert dieses Verhalten.     

Parallel Lagrange interpolation on <Emphasis Type="Italic">k</Emphasis>-ary <Emphasis Type="Italic">n</Emphasis>-cubes with maximum channel utilization

This paper proposes an efficient parallel algorithm for computing Lagrange interpolation on k-ary n-cube networks. This is done using the fact that a k-ary n-cube can be decomposed into n link-disjoint Hamiltonian cycles. Using these n link-disjoint cycles, we interpolate Lagrange polynomial using full bandwidth of the employed network. Communication in the main phase of the algorithm is based on an all-to-all broadcast algorithm on the n link-disjoint Hamiltonian cycles exploiting all network channels, and thus, resulting in high-efficiency in using network resources. A performance evaluation of the proposed algorithm reveals an optimum speedup for a typical range of system parameters used in current state-of-the-art implementations.

Optimal infinite scheduling for multi-priced timed automata

This paper is concerned with the derivation of infinite schedules for timed automata that are in some sense optimal. To cover a wide class of optimality criteria we start out by introducing an extension of the (priced) timed automata model that includes both costs and rewards as separate modelling features. A precise definition is then given of what constitutes optimal infinite behaviours for this class of models. We subsequently show that the derivation of optimal non-terminating schedules for such double-priced timed automata is computable. This is done by a reduction of the problem to the determination of optimal mean-cycles in finite graphs with weighted edges. This reduction is obtained by introducing the so-called corner-point abstraction, a powerful abstraction technique of which we show that it preserves optimal schedules. This work has been mostly done while visiting CISS at Aalborg University in Denmark and has been supported by CISS and by ACI Cortos, a program of the French Ministry of Research.     

The Basic Constructive Logic for Negation-Consistency

In this paper, consistency is understood in the standard way, i.e. as the absence of a contradiction. The basic constructive logic B_Kc4, which is adequate to this sense of consistency in the ternary relational semantics without a set of designated points, is defined. Then, it is shown how to define a series of logics by extending B_Kc4 up to minimal intuitionistic logic. All logics defined in this paper are paraconsistent logics.     

Continuous State Dynamic Programming via Nonexpansive Approximation

This paper studies fitted value iteration for continuous state numerical dynamic programming using nonexpansive function approximators. A number of approximation schemes are discussed. The main contribution is to provide error bounds for approximate optimal policies generated by the value iteration algorithm.      

Peristaltic micropump system with piezoelectric actuators

This work presents a driving system for a peristaltic micropump that is based on piezoelectric actuation. The effects of the actuation sequence on pump performance are also considered. A valveless peristaltic micropump based on piezoelectric actuation is designed and fabricated using microelectromechanical system technology. The pump has three parts––silicon, Pyrex glass and commercially available bulk PZT (lead zirconate titanate) chips. The peristaltic micropump actuated by PZT chips comprises three chambers that are in series. The driving system consists of an ATmega 8535 microprocessor, a high voltage power supply, three differential amplifiers, a phase controller, an A/D converter, a 555 oscillator and an LCD module. It is supplied via a 110 Vrms 60-Hz AC line and is programmable. The system can produce step-function signals with voltages of up to 100 V_pp and frequencies ranging from 10 Hz to 1 kHz, as the inputs for the pump. Fluid pumping with air is successfully demonstrated. Additionally, 3-, 4- and 6-phase actuation sequences for the pump are designed and used to study the effects on pump performance, as revealed by the flow rate and the displacement of a pump diaphragm. The experimental results show that the flow rate and the displacement of the diaphragm actuated by the 4-phase sequence exceed those actuated by the 3- and 6-phase sequences. A flow rate of 17.6 μl min⁻¹ and a displacement of 2.91 μm (peak-to-peak) in 4-phase peristaltic motion are achieved at 100 Hz and 100 V_pp. The results demonstrate that the pump actuated in the 4-phase sequence is the most efficient. Consequently, the actuation sequences can affect the pump performance.     

Direct microscale imprinting of Al at room temperature with Si inserts

For direct imprinting of metals, hard materials such as diamond and SiC have been used to construct mold inserts in preference to Si, despite the ease in fabricating Si-based micro-/nano- scale structures. In this communication, we demonstrate that micron scale Al structures can be replicated with good fidelity at room temperature by compression molding with Si inserts without incurring insert damage. We further report on results of a finite element analysis of the mechanics of the molding process. The finite element results provide some understanding of the observed lack of damage to the Si inserts.     

Collapse-free thermal bonding technique for large area microchambers in plastic lab-on-a-chip applications

Bonding is an essential step to form microchannels or microchambers in lab-on-a-chip applications. In this paper, we present a novel plastic thermal bonding technique to seal and form large area microchambers (planar characteristic width and length on the order of 1 mm and characteristic thickness on the order of 10–100 μm) without collapse by introducing a holed pressure equalizing plate (HPEP) that includes holes of the same size and shape as the microchambers. To demonstrate the proposed technique, two types of large area microchambers [(1) 20 × 10 mm and 40 μm thick and (2) 12 × 2.5 mm and 120 μm thick] with microchannels were designed and replicated on plastic substrates by means of hot embossing and injection molding processes with prepared two nickel mold inserts. The replicated large area microchambers as well as the microchannels in the plastic lab-on-a-chip were successfully sealed (i.e., no leakage) and formed without any collapse by the proposed thermal bonding technique with the help of the HPEP.     

Perceptual image preview

Image preview is a convenient way to browse large or multiple images on small displays. However, current signal-level image resampling algorithms may remove many features of interest in the preview image. In this paper, we propose perceptual image preview which retains more perceptual features such that users can inspect features of interest by viewing the preview image only and without zooming in. This technology has two components, structure enhancement and perceptual feature visualization. Structure enhancement enhances the image structure while suppressing subtle details using a gradient modulation method, thus making the succedent perceptual features more apparent. For perceptual feature visualization, features of interest detected in the picture is visualized on the structure enhanced preview image. We demonstrate with two examples of most commonly used image quality features, image blur and noise. The effectiveness of the proposed method is validated by experimental results.