Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism

The thermal expansion of a titanium modified, swelling resistant austenitic stainless steel designated as D9 is studied by measuring the lattice parameter as a function of temperature in the range 300-1300 K by high-temperature X-ray diffraction technique. The thermal expansion data thus obtained is in reasonable agreement with the typical thermal expansion values reported for similar nuclear grade austenitic stainless steels. However, at temperatures exceeding 900 K, the measured thermal expansivity exhibits a pronounced non-linear increase due partly to the precipitation of complex carbide and intermetallic phases. The high-temperature thermal expansion data obtained in the present study are augmented by modelling the low-temperature thermal expansion behaviour by Grüneisen formalism.     

Thermal stability of CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> multilayer thin films prepared by pulsed laser deposition

Multilayers of CeO₂/ZrO₂ thin films were deposited on Si (100) substrates using pulsed laser deposition at an optimized oxygen partial pressure of 3×10⁻² mbar and at room temperature. The CeO₂ layer thickness was 10 nm, while the ZrO₂ layer thickness was varied as 10, 20 and 30 nm. CeO₂ and ZrO₂ layers were deposited alternately to obtain 25 bilayers. High temperature x-ray diffraction (HTXRD) results showed that the multilayer films had cubic ceria and tetragonal ZrO₂. Thermal expansion coefficients were calculated for CeO₂ and t-ZrO₂ and found to increase with the decrease of ZrO₂ layer thickness. The cross sectional transmission electron microscopy (XTEM) of CeO₂/ZrO₂ multilayer also indicated that ceria was found to be in cubic phase while zirconia contained predominantly tetragonal phase along with cubic phase in thermally annealed specimen.     

Modeling and simulation of WDM optical networks under traffic control protocols

A proper node architecture design capable to support different network protocol enhances the data transport capability of a wavelength division multiplexed system. In the present paper a simple node architecture model has been developed to simulate the node throughput based on media access control protocols for bursty data traffic of variable time slot duration and data rate. An appropriate mathematical model has been derived to evaluate different types of traffic reservation protocols used in WDM networks. It has been observed that the network performance is well controlled through implemented protocols and network design parameters.     

13C CP/MAS NMR Spectroscopy of Native and Acid Modified Starches

¹³CP/MAS NMR spectroscopic studies of some starches from cereals (wheat, maize and finger millet), pulses (green gram, chick pea), tuber (potato) and root (tapioca), and their respective acid (HCI, HNO₃) modified starches were carried out. While cereal starches exhibited a triplet signal for their anomeric carbons, pulse, tuber and root starches showed doublets. Line width changes in signals indicated that debranching in the above modified starches led to narrowing of C₆ signals (more pronounced in the case of potato and tapioca starches) and were consistent with the release of branching strains. Potato starch, both native and modified, was found to be different from other starches as inferred from the chemical shift values for their anomeric carbons and line shape. The dihedral angle (ϕ′2) calculated from chemical shift values for C₁ and conformation of dihedral angel (x) as predicted from chemical shift of C₆ are discussed with respect to structural organization.     

Plackett-burman design for determining the preference of Rhizomucor miehei lipase for FA in acidolysis reactions with coconut oil

The preference of lipase (EC 3.1.1.3) from Rhizomucor miehei in the incorporation of 11 FA, ranging from C10∶0 to C22∶6, into coconut oil TAG during acidolysis was studied by applying the Plackett-Burman experimental design. Enzymatic acidolysis reactions were carried out in hexane at 37°C for 48 h with coconut oil (0.1 M) and a mixture of 11 FA at a TAG to FA molar ratio of 1∶1. Lipase was used at the 5 wt% level. The incorporation of FA into coconut oil TAG was determined by GC. The lipase showed preference for long-chain saturated FA for incorporation into coconut oil TAG. The FA with 18 carbon atoms showed a high incorporation rate (18∶1>18∶1>18∶3). The lipase showed the least preference for the incorporation of 12∶0, which occurs in maximal concentration (46%), whereas the most preferred FA, 18∶0, occurs at a very low concentration (<2%) in coconut oil. The overall preference of lipase for the incorporation of different FA into coconut oil TAG was 18∶0>18∶2, 22∶0>18∶1, 18∶3, 14∶0, 20∶4, 22∶6>16∶0>12∶0≫10∶0.     

Pramila Rao · D. Sujatha · K. Rathina Raj · S. Vishwanatha · K. Narasimhamurthy · P. Saibaba · D. Narasimha Rao · S. Divakar

 Subchronic toxicity dietary studies were conducted in albino rats on the safety aspects of residual β-cyclodextrin in egg samples treated for cholesterol removal at concentrations of 250, 125 and 20 ppm for a period of 90 days. Daily food intake, body weight gain, relative organ weights, histopathology, haematology and serum enzyme activities were studied. The study however, did not reveal any toxicity at any of the levels tested. It can therefore be concluded from the present study that β-cyclodextrin-treated egg samples do not cause any toxicity. Received: 28 September 1999     

Provably secure blockchain privacy-preserving smart contract centric dynamic group key agreement for large WSN

The Journal of Supercomputing - The contemporary Group Key Agreement (GKA) entails lightweight computing, reduced communication, decentralized certification, personal privacy protection,...     

Scheduling and sequencing of rubber compounds on banbury mixers in a tyre company

Scheduling and sequencing compounds on banbury mixers is a daily production planning function in a tyre company. The current scheduling procedures are based on experience. A number of factors, such as, capacity, cost, time, speed, set-up of mixers, compound changeovers, density and demand of compound, have to be considered during planning. In this paper, we propose a two-stage approach to this problem. This approach can be easily computerised to aid the personnel in the planning function. An example, considering actual data obtained from the company, is used to illustrate the approach. The current scheduling practice by company personnel, as inferred from past record, is also reported.     

Palladium‐nanoparticle intercalated vermiculite for selective hydrogenation of α,β‐unsaturated aldehydes

Palladium nanoparticles were generated in the interlamellar region of swelling 2:1 type vermiculite clay using an adsorption excess isotherm. An adsorption excess isotherm was constructed for vermiculite after exchanging the exchangeable Na⁺ ions in the interlamellar region using a binary liquid mixture (ethanol:toluene). Based on adsorption excess isotherm, 1% w/w palladium was intercalated into the interlamellar space of vermiculite. The Pd‐intercalated vermiculite was characterized by X‐ray diffraction, transmission electron microscopy and atomic absorption spectroscopy. The 1% w/w Pd‐intercalated vermiculite was tested for its catalytic activity towards selective hydrogenation reactions involving some α,β‐unsaturated carbonyl compounds using a pulse reactor and its catalytic activity was compared with commercial 1% Pd/C. The intercalated catalyst was found to be very selective towards the desired product of unsaturated alcohols. Copyright © 2007 Society of Chemical Industry     

Low-Temperature Processing of ZrB2-ZrC Composites by Reactive Hot Pressing

Dense ZrB₂-ZrC and ZrB₂-ZrC _x∼0.67 composites have been produced by reactive hot pressing (RHP) of stoichiometric and nonstoichiometric mixtures of Zr and B₄C powders at 40 MPa and temperatures up to 1600 °C for 30 minutes. The role of Ni addition on reaction kinetics and densification of the composites has been studied. Composites of ∼97 pct relative density (RD) have been produced with the stoichiometric mixture at 1600 °C, while the composite with ∼99 pct RD has been obtained with excess Zr at 1200 °C, suggesting the formation of carbon deficient ZrC _x that significantly aids densification by plastic flow and vacancy diffusion mechanism. Stoichiometric and nonstoichiometric composites have a hardness of ∼20 GPa. The grain sizes of ZrB₂ and ZrC _x∼0.67 are ∼0.6 and 0.4 μm, respectively, which are finer than those reported in the literature. This article is based on a presentation given in the symposium entitled “Materials Behavior: Far from Equilibrium” as part of the Golden Jubilee Celebration of Bhabha Atomic Research Centre, which occurred during December 15–16, 2006 in Mumbai, India.