Particles and vegetation: implications for the transfer of particle-bound organic contaminants to vegetation

This paper presents a comprehensive review of the mechanisms responsible for the transfer of atmospheric particulate deposition and soil particulate re-suspension onto vegetation. The nature of atmospheric aerosols and dry/wet particulate deposition are reviewed, together with information from the literature on radionuclides as tracers of the air particle/soil particle to vegetation transfer processes. Information from these fields is used to make inferences about the potential significance of these pathways in supplying particle-bound semi-volatile organic chemicals (e.g. polycyclic aromatic hydrocarbons, polychlorinated dibenzo-p-dioxins and dibenzofurans, polychlorinated biphenyls) to vegetation. Retention of compounds on particles brought to the above-ground plant surfaces is discussed. In the absence of definitive field/experimental studies, calculations are made drawing on the literature data to estimate the contributions of atmospheric and soil particle-bound organic contaminants to the plant concentration. These show that depending on the site-specific, species-specific and compound-specific scenarios considered, particulate-bound inputs may be negligible or may dominate the supply of organic contaminants to the above-ground portion of plants. However, field/experimental studies and direct measurements are needed to provide reliable quantitative data on this topic.     

A semiautomated procedure for the determination of phosphorus in water, waste waters and particulates

Improved procedures for the determination of total dissolved phosphorus (TDP), particulate phosphorus (PP) and dissolved inorganic orthophosphate (DP) are described. Organic particulate material is solubilized in 5 n NaOH, and phosphorus compounds are oxidized and mineralized to orthophosphate by persulfate digestion. DP is determined by an improved automated molybdenum blue procedure that does not require sample pH adjustment or a correction for silicate interference in the 0–50 mg Si 1^?1 range. The use of 36-position digestion racks allows 32 TDP or PP samples to be digested in ca. 1 and 4 h respectively. Detection limits in μg of phosphorus 1^?1 are DP, 2; TDP, 5; and PP. 1. Waste water samples were analyzed for TDP and PP by the nitric acid-sulfuric acid procedure and by the proposed method. There was no significant difference between the two sets of data (P > 0.45).     

A colorimetric method for ammonia in natural waters

An improved phenol-hypochlorite method for determining ammonia in water using nitroprusside as catalyst has been investigated. Unlike other recently published methods, the method is simple (and sufficiently sensitive for low-level analyses) and does not require accurate time intervals between reagents, not expensive equipment. The method is well suited for routine use.

Beer's Law was obeyed over the whole ammonia range investigated. Reproducibility was 1·3 per cent with 10 μg N, and 5·7 per cent with 1 μg N.     

Partitioning of polycyclic aromatic hydrocarbons between dissolved and particulate phases in natural waters

Quantities of polycyclic aromatic hydrocarbons (PAH), some of which are carcinogens, enter natural waters in effuents of coke production and other high-temperature industrial pyrolysis processes. Because of their low water solubilities. PAH compounds are generally considered to occur in particulate form in lakes and rivers. However, present studies of ¹⁴C-anthracene adsorption by autoclaved yeast cells indicated that significant fractions of both dissolved and particulate forms of PAH may exist in natural waters. Quantities of anthracene adsorbed exceeded values for PAH adsorption onto mineral surfaces by more than an order of magnitude: suspended organic material may thus be more important than mineral particles in adsorption of PAH compounds. Adsorption was highly dependent upon the yeast cell concentration, and varied widely through the range of suspended organic solids normally encountered in natural waters. The heat of adsorption (5.2 kcal/mole) was characteristic of a physical adsorptive process. Because ecological effects and pathways of dissolved and particulate PAH may differ, adsorptive partitioning may be important in determining PAH hazards to higher organisms in aquatic food chains, and ultimately to man.     

Trace-metal concentrations in normal human liver: methods to cope with marked variability

Concentrations of trace elements in human tissues characteristically vary widely, and the distributions of most concentrations are skewed to the right. Examination of some of the factors which contribute to the marked variability and skewness of the concentrations revealed that: (1) distributions of concentrations are satisfactorily normal (Gaussian) after logarithmic transformation, (2) ash weight is the best frame of reference in which to report results, (3) the distributions of metal concentrations are not further normalized by adjustments which assume that tissue lipid or collagen contains a fixed fraction of the metal found in the parenchyma, and (4) the choice of sample site within the liver is of minimal significance.     

Method for detecting moment connection fracture using high-frequency transients in recorded accelerations

The 1994 Northridge earthquake caused brittle fractures in steel moment frame building connections, despite causing little visible building damage in most cases. Future strong earthquakes are likely to cause similar damage to the many un-retrofitted pre-Northridge buildings in the western US and elsewhere. Without obvious permanent building deformation, costly intrusive inspections are currently the only way to determine if major fracture damage that compromises building safety has occurred. Building instrumentation has the potential to provide engineers and owners with timely information on fracture occurrence. Structural dynamics theory predicts and scale model experiments have demonstrated that sudden, large changes in structure properties caused by moment connection fractures will cause transient dynamic response. A method is proposed for detecting the building-wide level of connection fracture damage, based on observing high-frequency, fracture-induced transient dynamic responses in strong motion accelerograms. High-frequency transients are short (<1 s), sudden-onset waveforms with frequency content above 25 Hz that are visually apparent in recorded accelerations. Strong motion data and damage information from intrusive inspections collected from 24 sparsely instrumented buildings following the 1994 Northridge earthquake are used to evaluate the proposed method. The method’s overall success rate for this data set is 67%, but this rate varies significantly with damage level. The method performs reasonably well in detecting significant fracture damage and in identifying cases with no damage, but fails in cases with few fractures. Combining the method with other damage indicators and removing records with excessive noise improves the ability to detect the level of damage.     

In situ dialysis for the determination of the state of trace elements in natural waters

A new method is described which enables determination of the concentration of truly dissolved forms of trace elements in natural waters without substantial influence of adsorption on the walls of apparatus and vessels. The method also simplifies further analysis of the ionic and molecular forms of trace elements. It consists in immersing a dialysis bag, filled with pure water, directly into the natural water in situ and allowing the dialysis and adsorption equilibriu to be established. Conditions for the use of this method are discussed and results of the determination of the dissolved fraction of 20 elements in river water, as compared with the results by filtration and ultrafiltration are presented. Neutron activation analysis was used for the elemental determinations.     

Development of passive viscoelastic damper to attenuate excessive floor vibrations

Recent changes in the construction of building floors have included the use of light material composite systems and long span floor systems. Although these changes have many advantages, such floor systems can suffer from excessive vibration due to human activities. This problem is exacerbated in office buildings due to the reduction in inherent damping associated with modern fit outs. Excessive floor vibrations are often realised after the completion of construction or following structural modifications and normally arise due to inadequate knowledge of the damping values in the design process. Thus rectification measures are normally required to reduce floor accelerations. This paper proposes a new innovative passive viscoelastic damper to reduce floor vibrations. This damper can be easily tuned to the fundamental frequency of the floor and can be designed to achieve various damping values. The paper discusses the analytical development of the damper with experimental results presented on a prototype to demonstrate its effectiveness.     

Seismic methods for study of soil building properties

Bulletin of Engineering Geology and the Environment - Information about distribution of elastic wave propagation velocities Vp, Vs in the subsurface zone of a soil mass can be obtained rapidly and...     

Experimental studies on the weatherability of the capivara dam basalts,rio paranapanema,brazil

The weatherability of the basalts in the Capivara Dam site, Rio Paranapanema, São Paulo State, Brazil, has been studied by means of saturation-drying tests. A great number of samples have disaggre — gated intensively with production of fines. The behavior of these rocks is related to their petrography, especially to their content in expansive clay minerals. These studies were performed in order to obtain data for the utilization of this material as rock fill, including ripraps.