Determination of shear strength values according to EN 408

This paper presents the results of 382 shear tests carried out according to EN 408. The test pieces consisted of spruce (Picea abies) and varied in density and ring width orientation (radial, tangential and at an angle of 45° to the steel plates). In addition pieces containing pith and knots were tested. The paper discusses problems observed when using this test configuration and shows that the test results do not support the characteristic shear strength values as given in EN 338. Moreover, the test results do not support the relationship between characteristic shear strength and characteristic bending strength as given in EN 384.

---

Résumé Cet article présente les résultats de 382 essais de cisaillement menés conformément à EN 408. Les éprouvettes d’essai sont en épicéa (Picea abies) et présentent une variabilité en termes de masse volumique et d’orientation des cernes d’accroissement (radiale, tangentielle, à un angle de 45° par rapport aux plaques métalliques). Des éprouvettes supplémentaires contenant du cœur et des nœuds ont également été testées. L’article évoque les problèmes qui ont été mis en évidence lors de l’utilisation de ce dispositif expérimental et montre que les résultats expérimentaux ne sont pas en accord avec les valeurs caractéristiques de résistance au cisaillement données dans EN 338. De plus, ces résultats ne confirment pas la relation entre résistance caractéristique au cisaillement et résistance caractéristique à la flexion telle que stipulée dans EN 384.

     

Characteristic curves of hydrogenated amorphous silicon based solar cells modeled with the defect pool model

Using the improved expression of the defect pool model proposed by Powell and Deane we match the experimental current-voltage and the spectral response characteristic curves of hydrogenated amorphous silicon solar cells. We compare the electrical parameters resulting from using the different defect pool models published in the literature and from assuming a uniform density of dangling bond in every device layer. We discuss the applicability of the algorithm derived by Schumm for the stabilized state exploring its sensitivity to the sample history. Finally we propose an expression for stabilized cells adapting Schumm's ideas to the expression derived by Powell and Deane.     

Micromechanism of corrosion fracture of the plates of heat exchangers

We have studied the micromechanism of corrosion fracture of heat-transfer plates of a heat exchanger. The operation of heat exchangers under conditions of contamination of the plates with a sediment from water leads to their local corrosion under the sediment. The conditions of operation of the heat exchangers being equal, heat-transfer plates made of AiSi316Ti steel worked 2.36 times as long as those of AiSi304L steel. The corrosion fracture of plates under the sediment began from pitting initiation near nonmetallic inclusions of a certain nature. Afterwards, these pittings built up into corrosion spots by the mechanism of stress corrosion and hydrogen embrittlement. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 1, pp. 110–116, January–February, 2007.     

Uranium(III) in aqueous solutions: Preparation,properties, synthesis of solid compounds

Published data on the preparation procedures, stability, and complexation of U(III) in aqueous solutions are summarized and correlated. Reactions with inorganic and organic free radicals studied by the flash radiolysis method, the spectroscopic properties, the extraction and ion-exchange behavior of U(III), and methods for isolation of solid U(III) compounds from aqueous solutions are discussed.     

Beyond Boundary Objects: Collaborative Reuse in Aircraft Technical Support

Boundary objects are a critical, but understudied, theoretical construct in CSCW. Through a field study of aircraft technical support, we examined the role of boundary objects in the practical achievement of safety by service engineers. Their resolution of repair requests was preserved in the organization’s memory via three compound boundary objects. These crystallizations did not manifest a static interpretation, but instead were continually reinterpreted in light of meta-negotiations. This suggests design implications for organizational memory systems which can more fluidly represent the meta-negotiations surrounding boundary objects.     

Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

Thermostatting the Instrument for Registering Heat-Treated Product Parameters at Elevated Temperatures

Two variants of thermostats for measuring instruments are developed and tested. The temperature from 5 to 50°C required for normal operation of the instrument is maintained during the entire time the thermostat stays inside the drier, i.e., 43 h.     

Refractory Ceramics Based on Local Materials

A technology for producing ShA and ShB refractories uses high-melting clays from the Rostov Region and high-alumina technogenic waste. The effect of the chamotte-to-clay ratio, the granulometric composition, and the additive introduction method on the properties of products is investigated.__________Translated from Steklo i Keramika, No. 1, pp. 15 – 16, January, 2005.     

Polarization losses in reflector antennas

Various definitions for polarization-loss efficiency of Cassegrainian and front-fed reflectors are compared. The effects of flare angle, feed taper and the feed pattern asymmetry on the polarization-loss efficiency are investigated. The definitions based on aperture fields are shown to be inadequate and far fields must be used for calculating the polarization losses.