Polarization losses in reflector antennas

Various definitions for polarization-loss efficiency of Cassegrainian and front-fed reflectors are compared. The effects of flare angle, feed taper and the feed pattern asymmetry on the polarization-loss efficiency are investigated. The definitions based on aperture fields are shown to be inadequate and far fields must be used for calculating the polarization losses.     

Interferometric method for preventing mode-hopping in tunable external-cavity semiconductor lasers

A problem in frequency-tuning of external-cavity lasers is mode-hopping between neighbouring external-cavity modes. We demonstrate a new interferometric method for monitoring mode-hoping and an automatic control circuit for a 1.3 ?m grating external-cavity laser that maintains single-mode operation when the lasing frequency is tuned.     

Alcohol consumption as a self-handicapping strategy in women.

Assessed whether women self-handicap with alcohol consumption prior to engaging in a social evaluation task, which may be more relevant to their self-esteem than the intellectual tasks used in past self-handicapping studies on substance use. 113 women (aged 19–32 yrs), who were evaluated as normal drinkers, performed either a solvable or an insolvable social judgment task and then received either success feedback or no feedback. Ss received access to alcoholic and nonalcoholic beverages while awaiting a retest. The study terminated before the retest. The self-handicapping hypothesis that noncontingent success would produce relatively greater alcohol consumption was not supported. Regardless of feedback, insolvable test Ss consumed more alcohol than did solvable test Ss. Findings suggest that the hypothesis may be limited as a general model of alcohol consumption in both sexes. (13 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modeling the sequential switching shunt series regulator

This letter characterizes, in terms of the bandwidth and limit cycle frequency of its constituent subsystems, the sequential switching shunt series regulator -S/sup 4/R, a high-efficiency, low-mass and volume power cell devised to power the next generation of regulated power buses in telecommunication spacecrafts. Transconductance power source modeling is used to obtain linear and nonlinear models. These are used to establish a design control strategy which involves the dynamic response in large load requirements or at the end of the satellite life. Simulations and experimental results are also given to demonstrate the validity of the model.     

Mechanism of the skeletal isomerisation of linear butenes over ferrierite: analysis of side reactions

An investigation of the effect of reaction conditions on product distribution in the skeletal isomerisation reaction of linear butenes has been carried out. The main reaction routes over ferrierite have been identified. Beside the main product isobutene, major by-product formation occurs. The unwanted reactions include dimerisation of butene to form octenes, hydrogen transfer yielding small amounts of saturated C₃ and C₄ hydrocarbons and disproportionation producing propene and pentenes. The most abundant by-products were pentene and propene, though these were not formed in equimolar amounts as could be expected. Oligomerisation experiments of propene over ferrierite produced large amounts of butene and pentene, revealing the presence of adsorbed nonene. The cracking of this surface species to hexene and propene is the most likely reaction route for the excess propene formation. This additional path to propene formation operates mainly at temperatures above 623 K.     

Use of the Precipitation Method in the Synthesis of Ceramic Pigments

The results of the synthesis of ceramic pigments using coprecipitation of hydroxides and difficultly soluble salts of multivalent metal ions are described. The specifics of the coprecipitation process and the effect of various factors on the production of the initial precipitates for subsequent synthesis of ceramic pigments are analyzed. The technology of pigment production is described. __________ Translated from Steklo i Keramika, No. 6, pp. 37 – 39, June, 2005.     

Tracking and force control for a class of robotic manipulators

The increasing utilization of robotic manipulators in industrial tasks, such as assembly, forming or shaping of surfaces, and handling hazardous materials, depends greatly on available hybrid force and position control schemes. Since the robot and its environment are often subject to parameter uncertainties that cannot be neglected, it is necessary to design controllers that are robust with respect to these uncertainties. In addition, the dynamics of the robot are nonlinear, requiring consideration of nonlinear control concepts. Another aspect to be taken into account is the relative stiffness of the robot, the force sensor, and the manipulated surface. That is, the behavior of the system normal to the surface is relatively stiff, while that tangential to the surface is relatively free. Separation of the controller for these two directions is therefore indicated. We propose a controller design that accounts for this point of view and demonstrate its efficacy with respect to robustness and accuracy of position and force tracking by means of numerical simulations. The design is based on the control concept of Corless and Leitmann [l]. The example considered is a Manutecr3 robot with three degrees of freedom. In addition, we account for the dynamics of the actuator, which also possesses three degrees of freedom. The considered parameter uncertainties are friction moments in the links and friction between the end effector and the manipulated object, as well as nonlinear dynamics, which are difficult to characterize.Recommended by J. Skowronski     

Microstructural engineering applied to the controlled cooling of steel wire rod: Part I. Experimental design and heat transfer

The goal of this study was to develop a mathematical model which incorporates heat flow, phase transformation kinetics, and property-structure-composition relationships to predict the mechanical properties of steel rod being control cooled under industrial conditions. Thus, the principles of microstructural engineering have been brought to bear on this interdisciplinary problem by combining computer modeling with laboratory measurements of heat flow, austenite decomposition kinetics, microstructure and mechanical properties, and industrial trials to determine heat transfer and obtain rod samples under known conditions. Owing to the length and diversity of the study, it is reported in three parts,_[8191]the first of which is concerned with the heat flow measurements. A relatively simple and reliable technique, involving a preheated steel rod instrumented with a thermocouple secured at its centerline, has been devised to determine the cooling rate in different regions of the moving bed of rod loops on an operating Stelmor line. The measured thermal response of the rod has been analyzed by two transient conduction models (lumped and distributed parameter, respectively) to yield overall heat-transfer coefficients for radiation and convection. The adequacy of the technique has been checked by cooling instrumented rods under well-defined, air crossflow conditions in the laboratory and comparing measured heat-transfer coefficients to values predicted from well-established equations. The industrial thermal measurements have permitted the characterization of a coefficient to account for radiative interaction among adjacent rod loops near the edge and at the center of the bed. Formerly Graduate Student, The University of British Columbia.