The synthesis,characterisation and molecular structure of a new hetarylazoindole dye studied by X‐ray diffraction,spectral analysis and density functional theory calculation

1,2‐Dimethyl‐3‐(5‐methylisoxazol‐3‐yldiazenyl)‐1H‐indole was obtained by coupling 3‐amino‐5‐methylisoxazole with diazotised 1,2‐dimethylindole. It was characterised by proton and carbon nuclear magentic resonance, ultraviolet–visible, infrared and Raman spectra, and the X‐ray single crystal diffraction method. On the theoretical side, the molecular geometry, chemical shifts and the fundamental vibrational frequencies were evaluated using density functional theory. Time‐dependent density functional theory was used to evaluate the electronic excitation spectra. In addition, the scaled quantum mechanical approach was used to study the total energy distributions of the vibrational modes of the molecule. The results showed that the general agreement between experimental and calculated geometric parameters, chemical shifts and λ_max values are good. Excellent agreement was found between the calculated and experimental vibrational frequencies.     

Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics

In this study, effects of 0.5, 1.0 and 1.5 mole% CuO addition on the properties of potassium sodium niobate (K_0.5Na_0.5)NbO₃-KNN ceramics were investigated. Pure KNN and CuO-added KNN pellet samples were sintered at 1100 and 1090 °C for 4 h, respectively. Phase analysis showed that all samples crystallized in pure orthorhombic perovskite phase. Addition of 1.0 and 1.5 mole% CuO caused grain growth, densification and formation of a liquid phase at the grain boundaries. Curie temperature has shifted from 480 to 435 °C with increasing CuO ratio. The most remarkable characteristic of the hysteresis loops were the constricted nature of the 0.5 mole% CuO-added KNN's curve and the antiferroelectric-like appearance of the 1.5 mole% CuO-added KNN's curve. Piezeoelectric properties of d₃₃ = 120 pC/N, k_p = 0.27 and Q_m = 772 were obtained from the 1.5 mole% CuO-added KNN.     

Electrokinetic and antibacterial properties of needle like‐TiO2/polyrhodanine core/shell hybrid nanostructures

The aim of this study was to fabricate needle like‐TiO₂/polyrhodanine nanostructures by polymerizing rhodanine monomer on the TiO₂ nanoparticles' surfaces and investigate their antibacterial activities. The structural, thermal, morphological, surface and electrical properties of non‐covalently functionalized nanoparticles were characterized by using FTIR, XPS, elemental analysis, TGA, XRD, SEM‐EDX, TEM, contact angle, and conductivity measurements. Characterization results confirmed the formation of needle like‐TiO₂/polyrhodanine (PRh) core/shell hybrid nanostructures. Alterations on the surface and electrokinetic properties of the materials were characterized by zeta (ζ)‐potential measurements with the presence of various salts and surfactants. The ζ‐potential of needle like‐TiO₂ was observed to increase from ?7.6 mV to +28.4 mV after forming a core/shell needle like‐TiO₂/PRh nanocomposite structure and with the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. Thereby colloidally more stable dispersions were formed. Antibacterial properties of needle like‐TiO₂/PRh were also tested against Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli by various methods and they showed good antibacterial activity. The highest killing efficiency was determined for needle like‐TiO₂/PRh against E. coli by colony‐counting method as 0.95. TEM experiments also showed the immobilizations of the nanoparticles on E. coli and revealed the interactions between E. coli and the nanoparticles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41554.     

Comparison of the effects of different retention appliances on the oxidant–antioxidant system

The aim was to compare oxidative stress (OS) levels with different types of retention appliance. Thirty orthodontic patients were divided into three groups: Group 1 (Essix retainer), Group 2 (lingual retainer with stainless steel retainer wire), and Group 3 (lingual retainer with fiber-reinforced material). OS was assessed in the subjects’ saliva. Saliva samples were taken from the patients at T₀ (before using the retention appliance), T₁ (first month of retention), and T₂ (third month of retention). The specimens were investigated to detect changes in total antioxidant status (TAS), total oxidant status (TOS), and oxidative stress index (OSI). TAS values in Group 2 were significantly higher than in Group 3. TOS values in Group 3 were significantly lower than in the other groups. TOS values in Group 2 were lower than in Group 1. OSI values of Group 1 were higher than those in Group 2 or 3. There was no statistically significant difference among the time periods. The type of retention appliance affected OS values. A fiber-reinforced material may have a lower OSI. OS or products can affect some systemic disease; therefore, the selection of the retainer will be important on these patients.     

Processing and Properties of Textured Potassium Sodium Niobate [K,Na]NbO3 Ceramic Ribbons by Alginate Gelation Method

Random and <001> textured potassium sodium niobate – [K,Na]NbO₃ (KNN) ceramics with 1 mole% CuO sintering aid were fabricated in ribbon form through a combination of novel alginate gelation process and templated grain growth methods using platelike sodium niobate ‐ NaNbO₃ (NN) template particles. The platelike NN template particles were prepared by a two‐step molten salt synthesis method. Ribbons were drawn from alginate‐based slurries without or with 10 wt% NN template particles using 50 mm long slit nozzle with a rectangular orifice of 10 mm × 1 mm. Development of crystallographic texture as a result of varying sintering time and temperature was evaluated through the calculation of the degree of orientation as measured by the Lotgering factor (?₍₀₀₁₎) and an ?₍₀₀₁₎ of 0.81 was achieved. The electrical properties of textured ribbons were evaluated with polarization and strain versus electric field measurements.     

Effect of gas permeation temperature and annealing procedure on the performance of binary and ternary mixed matrix membranes of polyethersulfone,SAPO‐34, and 2‐hydroxy 5‐methyl aniline

This study investigated the effect of annealing time and temperature on gas separation performance of mixed matrix membranes (MMMs) prepared from polyethersulfone (PES), SAPO‐34, and 2‐hydroxy 5‐methyl aniline (HMA). A postannealing period at 120°C for a week extensively increased the reproducibility and stability of MMMs, but for pure PES membranes no post‐annealing was necessary for stable and reproducible performance. The effect of operation temperature was also investigated. The permeabilities of H₂, CO₂, and CH₄ increased with increasing permeation temperature from 35°C to 120°C, yet CO₂/CH₄ and H₂/CH₄ selectivities decreased. PES/SAPO‐34/HMA ternary and PES/SAPO‐34 binary MMMs exhibited the highest ideal selectivity and permeability values at all temperatures, respectively. For H₂/CO₂ pair, when temperature increased from 35°C to 120°C, selectivity increased from 3.2 to 4.6 and H₂ permeability increased from 8 to 26.5 Barrer for ternary MMM, demonstrating the advantage of using this membrane at high temperatures. The activation energies were in the order of CH₄ > H₂ > CO₂ for all membranes. PES/SAPO‐34/HMA membrane had activation energies higher than that of PES/SAPO‐34 membrane, suggesting that HMA acts as a compatibilizer between the two phases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40679.     

Application of antimicrobial ice for extending shelf life of fish

In this study, we investigated whether wild-thyme (Thymus serpyllum) hydrosol had a preserving effect against spoilage of freshwater fish. Sensorial characteristics, chemical freshness indicator contents, and microbial counts (total aerobes, psychrotrophics, Enterobacteriaceae, fecal coliform bacteria, Aeromonas spp., and Pseudomonas spp.) of whole ungutted and gutted Transcaucasian barb (Capoeta capoeta capoeta Guldenstaedt, 1772) stored on ice produced from wild-thyme hydrosol and tap water at 4 degrees C for 20 days were compared. The results did not reveal any significant (P > 0.05) differences in the microbial counts, sensorial characteristics, pH, and total volatile basic nitrogen values between gutted and ungutted groups. Sensory evaluation and microbiological and chemical analyses indicated that the storage of the fish on ice produced from wild-thyme hydrosol had a significant increase in shelf life by at least 15 to 20 days.     

Predicting construction crew productivity by using Self Organizing Maps

A Self Organizing Map (SOM), is a machine learning method that represents high-dimensional data in low-dimensional form without losing topological relations of the data. After an unsupervised learning process, it organizes the data on the basis on similarity. In the current study, a SOM based algorithm has been developed which not only produces 2-D maps to analyze the relationship between various factors and crew productivity, but also predicts productivity under given conditions. Validation of the model has been achieved both by using artificial data set and data from 144 concrete pouring, 101 formwork and 101 reinforcement crews. The results show that maps which are produced by the model are satisfactory in clustering the data and prediction performance of the model is superior to similar artificial neural network models.