The investigation of synergistic inhibition effect of rhodanine and iodide ion on the corrosion of copper in sulphuric acid solution

The synergistic inhibition effect of rhodanine (Rdn) and iodide ion on the corrosion of copper in 0.5 M H₂SO₄ solution was studied using electrochemical techniques. The surface morphologies of the substrates were examined by scanning electron microscopy (SEM). Elemental analysis of electrode surface exposed to test solution was determined by energy dispersive X-ray spectroscopy (EDX). It was found that Rdn provided satisfactory inhibition on the corrosion of copper. Moreover, its inhibition efficiency further increased in the presence of iodide ions due to synergistic effect. Finally, a mechanism of inhibition is proposed and discussed.     

Prediction of the heat transfer performance of twisted tape inserts by using artificial neural networks

Journal of Mechanical Science and Technology - A numerical study is undertaken to investigate the effect of twisted tape inserts on heat transfer. Twisted tapes with various aspect ratios and...     

Adsorption and corrosion inhibition effect of 2-((5-mercapto-1,3,4-thiadiazol-2-ylimino)methyl)phenol Schiff base on mild steel

In this study, the inhibition effect of 2-((5-mercapto-1,3,4-thiadiazol-2-ylimino)methyl)phenol Schiff base (MTMP) on mild steel corrosion in 0.5 M HCl solution was studied. For this aim, electrochemical techniques such as potentiodynamic polarization curves, weight loss (WL), electrochemical impedance spectroscopy (EIS) and linear polarization resistance (LPR) were used. It was shown that, the MTMP Schiff base has remarkable inhibition efficiency on the corrosion of mild steel in 0.5 M HCl solution. Polarization measurements indicated that, the studied inhibitor acts as mixed type corrosion inhibitor with predominantly control of cathodic reaction. The inhibition efficiency depends on the concentration of inhibitor and reaches 97% at 1.0 mM MTMP. The remarkable inhibition efficiency of MTMP was discussed in terms of blocking of electrode surface by adsorption of inhibitor molecules through active centers. The adsorption of MTMP molecules on the mild steel surface obeys Langmuir adsorption isotherm.     

Diameter of titanium nanotubes influences anti-bacterial efficacy

Bacterial infection of in-dwelling medical devices is a growing problem that cannot be treated by traditional antibiotics due to the increasing prevalence of antimicrobial resistance and biofilm formation. Here, due to changes in surface parameters, it is proposed that bacterial adhesion can be prevented through nanosurface modifications of the medical device alone. Toward this goal, titanium was created to possess nanotubular surface topographies of highly controlled diameters of 20, 40, 60, or 80 nm, sometimes followed by heat treatment to control chemistry and crystallinity, through a novel anodization process. For the first time it was found that through the control of Ti surface parameters including chemistry, crystallinity, nanotube size, and hydrophilicity, significantly changed responses of both Staphylococcus epidermidis and Staphylococcus aureus (pathogens relevant for orthopaedic and other medical device related infections) were measured. Specifically, heat treatment of 80 nm diameter titanium tubes produced the most robust antimicrobial effect of all surface treatment parameters tested. This study provides the first step toward understanding the surface properties of nano-structured titanium that improve tissue growth (as has been previously observed with nanotubular titanium), while simultaneously reducing infection without the use of pharmaceutical drugs.     

A review on microalgal growth stress parameters for sustainable biofuel production

Clean Technologies and Environmental Policy - Rapid growth and high carbon-fixation properties make microalgal biomass a preferred source of energy-production technologies, particularly biodiesel...     

Preparation of polyurethane/hectorite,polyurethane/montmorillonite,and polyurethane/laponite nanocomposites without organic modifiers

Polyurethane (PU) nanocomposites were prepared from hectorite (HEC) and laponite without adding any organic modifier. PU‐montmorillonite nanocomposites were prepared for comparison. The structure of the composites were investigated by transmission electron microscopy, X‐ray diffraction spectroscopy, and Fourier transform infrared spectroscopy. Thermal gravimetric analysis and dynamic mechanic analysis were used for determination of the thermal and viscoelastic behaviors, respectively. Tensile tests were conducted for characterization of the mechanical properties. The results showed a 113.5% increase in the tensile strength of PU containing 7 wt % HEC compared to that of neat PU. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Influences of nonionic poly(ethylene glycol) polymer PEG on electrokinetic and rheological properties of bentonite suspensions

The determination of the electrokinetic properties of colloidal systems is very important for the chracterization of these systems. Colloidal systems have high adsorption performance due to the carrying of negative charges and the colloid structure. The control of the electrokinetic properties of the bentonite–water system are important not only from a technological point view; they are also important from a scientific point of view. Knowing the electrokinetic and rheological properties of bentonite minerals is important for the estimation of the behavior of clays under various environmental conditions. The purpose of this study was to interpret the effect of the nonionic poly(ethylene glycol) (PEG) polymer on electrokinetic and rheological properties. Zeta potential and viscosity measurements were done as a function of PEG molecular weights (400, 3000, and 8000) and their concentrations (2.5 × 10^?5 to 1.25 × 10^?2 mol/L). We interpreted the experimental data, taking into account these two parameters. X‐ray diffaction studies were done together with the electrokinetic and rheological measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 341–346, 2002     

Optimization of Process-Control Parameters for the Diameter of Electrospun Hydrophilic Polymeric Composite Nanofibers

A composite nanofiber composed of three polymers, namely polyvinyl alcohol/polyvinyl pyrrolidone/polyethylene oxide, is produced. The experiments are constructed using three design of experiment techniques, Taguchi L₉, Taguchi L₂₇, and Screening method. The experiments are verified using the analysis of variance (ANOVA) method and later a mathematical model is developed using the regression method. The impact of electrospun processing parameters, namely applied voltage, flow rate, and working distance, on nanofibers' diameter is measured. The working distance is a significant factor in controlling the size of the fiber diameter, while the applied voltage has the lowest effect on it. As a result of the regression equation, a Genetic algorithm is used to find the optimum variables for the required fiber diameter, which is 156 nm for flow rate = 0.001 mL h⁻¹, voltage = 30 kV, and distance = 200 mm with a 3% difference from the experimental fiber diameter.     

Heat transfer reduction at the separation point on a spinning sphere in mixed convection

The unsteady laminar thermal boundary‐layer flow over an impulsively started translating and spinning isothermal body of revolution in the case of mixed convection is investigated. Velocity components and temperature are obtained as series of functions in powers of time. The general results are applied to a spinning sphere and the development of the surface heat flux evaluated at the separation point as it advances upstream is determined. The surface heat flux evaluated at the separation point as it moves forward decreases due to the increasing magnitude and influence of the centrifugal force and it is augmented by the opposing flow and reduced by the aiding flow. Reduction of the surface heat flux at the separation point is as low as 50 per cent as compared to the heat flux at the front stagnation point. Copyright © 2002 John Wiley & Sons, Ltd.