Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.     

Design criteria for the crystallization of an organic salt from an aqueous solutionAuslegungsunterlagen zur kristallisation eines organischen salzes aus wässriger Lösung

Results from laboratory experiments and a 500 tonnes per month pilot plant have been used to draw up criteria for designing the crystallization of an organic salt from its aqueous solution. The crystallization kinetics were determined in a continuous forced circulation crystallizer. The experiments in the forced circulation evaporative crystallizer were carried out and evaluated in accordance with the MSMPR (mixed suspension mixed product removal) concept.The residence time was varied between 0.8 and 10 hours, and the density of the suspension between 180 and 870 kg m^?3. It was found that, within the residence time and suspension density ranges studied, growth and nucleation rates have the same dependence on the supersaturation. On the other hand, the nucleation rate decreases with increasing suspension density. If the crystallization kinetics and other design criteria, such as vapour velocity, i.e. supersaturation ratio in the vicinity of the evaporative surface, or height of liquid above the heat exchangers, are taken into account, it is possible to obtain a space—time yield which is five times higher than in the pilot plant, so that the plant to be built can be designed to be correspondingly smaller.     

Optimal predictor for a singular random process

An optimal predictor is developed for a singular random process generated by a known system driven by a white noise sequence. The properties of the predictor are compared with those of the optimal predictor for a nonsingular random process.     

High-speed, polyimide-based semi-insulating planar buried heterostructures

We describe planar buried heterostructure lasers which have low capacitance (lpF), large bandwidth (19GHz), high power (>20mW/facet) and high temperature operation (100°C). These lasers are very suitable for long-distance, highspeed digital and analogue signal transmission.     

Radiation Equivalence and Natural Similitude in Handling Radioactive Wastes

The possibility of long-term safe disposal of radioactive wastes based on their radiation and radiation-migration balance with the initial fuel component and taking account of the thermal, radiation, and elastic loads due to waste dispoasl on the natural medium is examined. The specific radiation and radiation-migration equivalence is established on the basis of the radiotoxicity of uranium and the components of the decay of uranium and individual radionuclides as well as the sum of the latter.     

Temperature-induced phase change in a fat. A study by electron spin resonance

Electron Spin Resonance, Differential Scanning Calorimetry and rheological techniques have been used to study the physical changes induced by temperature in lard and in the solid and liquid fractions obtained by fractionation of lard at 15 C. The mobilization process of a C18 fatty acid nitroxide derivative dispersed in the molten fat has been observed in the temperature range −50 to +70 C. The mobilization of the probe seemed to be concomitant with the melting of the low melting point glycerides. Above this temperature, all the probes were in the liquid phase and their mobility reflected the viscosity of their liquid environment, or the viscosity of the bulk fat when crystal was no longer present. Probe mobility was temperature dependent, and it was identical for the three fats at the same temperature, despite their different triglyceride compositions.     

Topology optimization of interconnection networks

This paper describes an automatic optimization tool that searches a family of network topologies to select the topology that best achieves a specified set of design goals while satisfying specified packaging constraints. Our tool uses a model of signaling technology that relates bandwidth, cost and distance of links. This model captures the distance-dependent bandwidth of modern high-speed electrical links and the cost differential between electrical and optical links. Using our optimization tool, we explore the design space of hybrid Clos-torus (C-T) networks. For a representative set of packaging constraints we determine the optimal hybrid C-T topology to minimize cost and the optimal C-T topology to minimize latency for various packet lengths. We then use the tool to measure the sensitivity of the optimal topology to several important packaging constraints such as pin count and critical distance.     

Video monitoring of pulverized coal injection in the blast furnace

A novel approach to monitoring and control of the coal powder injection in a blast furnace is presented and discussed. Image analysis of video recordings is used as a means to estimate the instantaneous coal flow. Initial experiments at blast furnace number 3 of SSAB Tunnplat AB, Lulea, Sweden, are reported and firsthand results on modeling and control of a single injection line are given     

Modified Hopfield neural networks for retrieving the optimalsolution

Due to the rugged energy function of the original Hopfield networks, the output is usually one local minimum in the energy function. An analysis on the locations of local minima in Hopfield networks is presented, and a modified network architecture to eliminate such local minima is described. In particular, another amplifier is introduced at the processor nodes to give correction terms. This modified Hopfield network has been successfully applied to the construction of analog-to-digital converters with optimal solutions. Experimental results on the voltage transfer characteristics of data converters are presented.     

Polarization independent isolator using spatial walkoff polarizers

A novel type of polarization-independent optical isolator is described which utilizes the polarization walkoff provided by birefringent crystals. Isolation of 44 dB is measured at a wavelength of 1.3 mu m with single-mode fiber insertion loss of 1.5 dB. A temperature-independent scheme is also described that provides at least 39 dB of isolation over the temperature range of 25-75 degrees C.<>