Simulator sickness in patients with neck pain and vestibular pathology during virtual reality tasks

Immersion in virtual environments can cause simulator sickness (SS). Further, head and neck movement in interactive virtual reality (VR) assessment and training stimulates the vestibular and cervical afferent systems that can cause dizziness in subjects with neck pain and vestibular pathology. This cross-sectional, observational, study investigated SS and factors that may influence this between 20 neck pain, 14 vestibular pathology and 20 asymptomatic control subjects. Pre-VR questionnaires included a visual symptom scale and dizziness intensity. SS measures included the simulator sickness visual analogue scale and the simulator sickness questionnaire. Significantly greater incidence of any SS and higher values were found in the vestibular and neck pain groups compared to the control group in selected SS measures. No significant differences were found when comparing SS measures between the vestibular and neck pain groups. Significant mild-to-moderate correlations for the entire population were found between both SS measures to pre-VR visual symptoms and dizziness intensity. SS levels in neck pain and vestibular populations are comparable and higher than asymptomatic individuals. Dizziness and visual disturbances may be associated with an increase in severity of SS in these clinical populations.     

New light-sensitive nucleosides for caged DNA strand breaks

Phototriggered bod cleavage has found wide application in chemistry as well as in biology. Nevertheless, there are only a few methods available for site-specific photochemical induction of DNA strand scission despite numerous potential applications. In this study we report the development of new photocleavable nucleotides based on the photochemistry of o-nitrobenzyl esters. The light-sensitive moieties were generated through introduction of o-nitrophenyl groups at the 5'C position of the nucleoside sugar backbone. The newly synthesized, modified nucleosides were incorporated in oligonucleotides and are able to build stable DNA duplexes. In such a way modified oligonucleotides ca cleaved site-specifically upon irradiation with > 360 nm light with high efficiency. Furthermore, we show that these modifications can be bypassed in DNA synthesis promoted by Thermus aquaticus DNA polymerase.     

Toluene degradation by a water/silicone oil mixture for the design of two phase partitioning bioreactors

Toluene degradation performances were studied in a 10 L Two-Phase Partitioning Bioreactor (TPPB).The liquid phase consisted of a mixture of water and PDMS 50 (PolyDiMethylSiloxane,i.e.silicone oil,viscosity of 46 maa·s) in the volume ratio of 75％/25％.Two series of experiments were carried out:in the first,the reactor was sequentially supplied with toluene whereas in the second,toluene was continuously supplied.Activated sludge from the wastewater treatment plant of Beaurade (Rennes,France) was used at an initial concentration of 0.5 dry mass g· (mixture L)-1.The elimination capacity (EC) was investigated as well as the change in biomass concentration over time.Toluene biodegradation was very efficient (removal efficiency,RE =100％) for toluene flows ranging from 0.2 to 1.2 ml· h-1,corresponding to elimination capacities of up to 104 g· m-3· h-1.For a toluene flow of 1.2 ml·h-1,the biomass concentration measured at the end of the experiment was 4.7 dry mass g.(mixture L)-1.The oxygen concentration in the liquid phase was clearly not a limiting factor in these operating conditions.Based on these results,an extrapolation leading to the design of a large-scale pilot TPPB can now be considered to study toluene degradation performances in industrial conditions.     

Improved biocomposite development of poly(vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering

In scaffold guided tissue engineering (TE), temporary three-dimensional scaffolds are essential to guide and support cell proliferation. Selective Laser Sintering (SLS) is studied for the development of such scaffolds by eliminating pore spatial control problems faced in conventional scaffolds fabrication methods. SLS offers good user control over the scaffold’s microstructures by adjusting its main processing parameters, namely the laser power, scan speed and part bed temperature. This research focuses on the improvements in the fabrication of TE scaffolds using SLS with powder biomaterials, namely hydroxyapatite (HA) and poly(vinyl alcohol) (PVA). Grinding of as-received PVA powder to varying particle sizes and two methods of mixing are investigated as the preparation process to determine a better mixing method that would enhance the mixture homogeneity. Suitable sintering conditions for the improved biocomposite are then achieved by varying the important process parameters such as laser power, scan speed and part bed temperature. SLS fabricated samples are characterized using Fourier Transform Infrared Spectrometer (FTIR) and Scanning Electron Microscope (SEM). FTIR results show that the grinding and sintering processes neither compromise the chemical composition of the PVA nor cause undue degradation. Visual analysis of the grinding, powder mixing and sintering effect are carried out with SEM. The SEM observations show improvements in the sintering effects. The favorable outcome ascertains PVA/HA biocomposite as a suitable material to be processed by SLS for TE scaffolds.     

Inactivation of E. coli, B. subtilis spores, and MS2, T4, and T7 phage using UV/H2O2 advanced oxidation

The goal of this study was to evaluate the potential of an advanced oxidation process (AOP) for microbiocidal and virucidal inactivation. The viruses chosen for this study were bacteriophage MS2, T4, and T7. In addition, Bacillus subtilis spores and Escherichia coli were studied. By using H(2)O(2) in the presence of filtered ultraviolet (UV) irradiation (UV/H(2)O(2)) to generate wavelengths above 295nm, the direct UV photolysis disinfection mechanism was minimized, while disinfection by H(2)O(2) was also negligible. Virus T4 and E. coli in phosphate buffered saline (PBS) were sensitive to >295nm filtered UV irradiation (without H(2)O(2)), while MS2 was very resistant. Addition of H(2)O(2) at 25mg/l in the presence of filtered UV irradiation over a 15min reaction time did not result in any additional disinfection of virus T4, while an additional one log inactivation for T7 and 2.5 logs for MS2 were obtained. With E. coli, only a slight additional effect was observed when H(2)O(2) was added. B. subtilis spores did not show any inactivation at any of the conditions used in this study. The OH radical exposure (CT value) was calculated to present the relationship between the hydroxyl radical dose and microbial inactivation.     

Betontechnologie und Dauerhaftigkeit von glasfaserbewehrten Bauteilen

Concrete Technology and Durability of Glass Fibre Reinforced Structures The durability of glass fibre reinforced concrete structures is significantly determined by matrix composition, the type of glass and its surface quality including necessary coatings. In the paper an experimental overview is given concerning special material influences and their interaction in the composite.     

Salt-Sensitive Hypertension in GR+/− Rats Is Accompanied with Dysregulation in Adrenal Soluble Epoxide Hydrolase and Polyunsaturated Fatty Acid Pathways

Mutations within the glucocorticoid receptor (GR) gene locus lead to glucocorticoid resistance which is characterized by several clinical symptoms such as adrenal gland hyperplasia and salt-sensitive hypertension, although the underlying mechanisms are still unknown. We studied GR haploinsufficient (GR^+/−) Sprague Dawley rats which, on a standard diet, showed significantly increased plasma aldosterone and corticosterone levels and an adrenocortex hyperplasia accompanied by a normal systolic blood pressure. Following a high salt diet, these rats developed salt-sensitive hypertension and maintained elevated enzyme-soluble epoxide hydrolase (sEH) in adrenal glands, while sEH was significantly decreased in wild-type rats. Furthermore, GR^+/− rats showed dysregulation of the equilibrated linoleic and arachidonic acid pathways, with a significant increase of less active metabolites such as 8,9-DiHETrE. In Sprague Dawley rats, GR haploinsufficiency induced steroid disturbances, which provoked hypertension only in combination with high salt intake, which was accompanied by disturbances in sEH and fatty acid metabolism. Our results suggest that sEH inhibition could be a potential target to treat hypertension in patients with GR haploinsufficiency.     

Layer‐by‐Layer Coated Gold Nanoparticles: Size‐Dependent Delivery of DNA into Cells

Because nanoparticles are finding uses in myriad biomedical applications, including the delivery of nucleic acids, a detailed knowledge of their interaction with the biological system is of utmost importance. Here the size‐dependent uptake of gold nanoparticles (AuNPs) (20, 30, 50 and 80 nm), coated with a layer‐by‐layer approach with nucleic acid and poly(ethylene imine) (PEI), into a variety of mammalian cell lines is studied. In contrast to other studies, the optimal particle diameter for cellular uptake is determined but also the number of therapeutic cargo molecules per cell. It is found that 20 nm AuNPs, with diameters of about 32 nm after the coating process and about 88 nm including the protein corona after incubation in cell culture medium, yield the highest number of nanoparticles and therapeutic DNA molecules per cell. Interestingly, PEI, which is known for its toxicity, can be applied at significantly higher concentrations than its IC₅₀ value, most likely because it is tightly bound to the AuNP surface and/or covered by a protein corona. These results are important for the future design of nanomaterials for the delivery of nucleic acids in two ways. They demonstrate that changes in the nanoparticle size can lead to significant differences in the number of therapeutic molecules delivered per cell, and they reveal that the toxicity of polyelectrolytes can be modulated by an appropriate binding to the nanoparticle surface.     

Numerical analysis of moisture vapor diffusion in asphalt mixtures using digital images

The presence of moisture in asphalt mixtures is detrimental to their performance, e.g., softening the asphalt binder and weakening the aggregate-binder bond. One of the mechanisms of moisture transport, and the focus of this study, is molecular diffusion. Moisture diffusion occurs in response to a concentration gradient. The objective of this study was to estimate the diffusion coefficient of moisture vapor in asphalt mixtures by using finite element (FE) and finite difference (FD) numerical algorithms that employ digital images to discretize the composite. X-ray computed tomography was used to characterize the microstructure of laboratory-prepared specimens and provide the required three-dimensional digital images, which were segmented into three phases: air voids, a mixture of asphalt binder and the fine aggregate fraction, and coarse aggregates. Individual diffusion coefficients were assigned to each phase and the effective diffusion coefficient for the composite was computed using the numerical algorithms. The outcome was compared against experimental values. The effective diffusion coefficient for the asphalt mixtures obtained using the FD method showed closer agreement with the experimental data, while the FE results overestimated the experimental measurements in all cases.