Subsoil <Superscript>15</Superscript>N-N<Subscript>2</Subscript>O Concentrations in a Sandy Soil Profile After Application of <Superscript>15</Superscript>N-fertilizer

Studies on emissions of nitrous oxide (N₂O) from agricultural soils mostly focus on fluxes between the soil and the atmosphere or are limited to the atmosphere in the topsoil. However, in soils with shallow water tables, significant N₂O formation may occur closer to the groundwater. The aims of this study were (i) to determine the importance of subsoil N₂O formation in a sandy soil; and (ii) to obtain a quantitative insight in the contribution of subsoil N₂O to the overall losses of N₂O to the environment. We applied ¹⁵N labeled fertilizer at a rate of 5.22 kg ¹⁵N ha⁻¹; 50% as Ca(NO₃)₂ and 50% as NH₄Cl, on a mesic typic Haplaquod seeded with potatoes (Solanum tuberosum L.), and traced soil N₂O concentrations and fluxes over a one-year period. Throughout the year, total N₂O and the amount of ¹⁵N recovered in soil N₂O were highest in the subsoil, with a maximum concentration at 48 cm depth in mid-February of 19900 μl m⁻³ and 24 μg ¹⁵N m⁻³, respectively. The maximum concentration coincided with the highest water-filled pore space of 71%. The cumulative flux of N₂O was 446 g N₂O-N ha⁻¹, the recovery of ¹⁵N in this flux was 0.06%. During the summer, maximum fluxes followed high soil N₂O concentrations. During winter, no such relation was found. We concluded that the formation of N₂O was the highest in the subsoil, largely controlled by water-filled pore space rather than NO₃⁻ concentration or temperature. Although high subsoil N₂O concentrations did not lead to high surface fluxes of N₂O in the winter, artificial draining may lead to high indirect N₂O emissions through supersaturated drainage water.     

High-throughput approach to the catalytic combustion of diesel soot

A methodology for the evaluation of diesel soot oxidation catalysts by high-throughput (HT) screening was developed. The optimal experimental conditions (soot amount, catalyst/soot ratio, type of contact, composition and flow rate of gas reactants) ensuring a reliable and reproducible detection of light-off temperatures in a 16 parallel channels reactor were set up. The temperature profile measured in the catalyst/soot bed under TPO conditions when the exothermic combustion of soot takes place was shown to provide an accurate measurement of the ignition. Its reproducibility and relevance were checked. The results obtained with a reference noble metal free catalyst (La_0.8Cr_0.8Li_0.2O₃ perovskite) agree very well with literature data. Qualitative mechanistic features could be derived from these experiments, stressing the likely limiting step of oxygen transfer from catalyst surface to soot particulates to ignite the soot combustion. Ceria material was shown to be more appropriate than perovskite one. From an HT screening of a large diverse library (over 100 mixed oxides catalysts) under optimized conditions, about 10 new formulations were found to perform better than selected noble metal free reference materials.     

Possible impacts of floods and droughts on water quality

The gradual climate change symptoms in many places on Earth have been observed during the last 20 years. There is a significant increase in frequency and extremity of meteorological and hydrological events (EEA, 2007) that lead to distinct excess or lack of water in landscape. These phenomena affect not only actual quantity of water but also its quality with direct and indirect impacts on aquatic organisms. From the environmental impact point of view, drought events are considered to be more dangerous due to their medium-term to long-term characteristics and large spatial impacts. However, this study presents that the particular flood event had significantly greater impact on water quality than the period of drought even if for only a very short time The paper reviews changes in water quality with all its consequences during selected extreme hydrological situations in the Czech Republic in last 10 years and compares them with the knowledge of impacts of floods and droughts on water quality collected from literature.     

Electronic States and Light Absorption in a Cylindrical Quantum Dot Having Thin Falciform Cross Section

Energy level structure and direct light absorption in a cylindrical quantum dot (CQD), having thin falciform cross section, are studied within the framework of the adiabatic approximation. An analytical expression for the energy spectrum of the particle is obtained. For the one-dimensional “fast” subsystem, an oscillatory dependence of the wave function amplitude on the cross section parameters is revealed. For treatment of the “slow” subsystem, parabolic and modified Pöschl-Teller effective potentials are used. It is shown that the low-energy levels of the spectrum are equidistant. In the strong quantization regime, the absorption coefficient and edge frequencies are calculated. Selection rules for the corresponding quantum transitions are obtained.     

Crash costs by body part injured, fracture involvement, and threat-to-life severity. United States, 2000

This paper presents costs per US motor vehicle crash victim differentiated into many more diagnostic categories than prior estimates. These unit costs, which include the first keyed to the 1990 edition of Abbreviated Injury Scale (AIS) threat-to-life severity scores, are reported by body part, whether a fracture/dislocation was involved, and the maximum AIS score among the victim's injuries. This level of detail allows for a more accurate estimation of the social costs of motor vehicle crashes. It also allows for reliable analyses of interventions targeting narrow ranges of injuries. The paper updates the medical care data underlying the US crash costs from 1979 to 1986 to the mid 1990s and improves on prior productivity cost estimates. In addition to presenting the latest generation of crash victim costs, this paper analyzes the effects of applying injury costs classified by AIS code from the 1985 edition to injury incidence data coded with the 1990 edition of AIS. This long-standing practice results in inaccurate cost-benefit analyses that typically overestimate benefits. This problem is more acute when old published costs adjusted for inflation are used rather than the recent costs.     

Doping-induced broadening of the hole density-of-states in conducting polymers

The density-of-states distribution in conducting polymers reflects the energy disorder caused by electrostatic and steric interactions resulting from the different environment in which each molecule is placed. In case of p-doping (oxidation), the highest occupied molecular orbital (HOMO) manifold spreads in energy following a distribution as a result of long-range electrostatic (dipolar) interactions with the surrounding disordered host. In this paper the repercussion of the dipolar disorder on electrochemical signals of standard polypyrrole films is explored. The analysis is based on the chemical capacitance variation with the applied potential in experiments performed in quasi-equilibrium conditions. In addition to the Gaussian shape of cyclic voltammograms at low-doping levels, the model is able to qualitatively account for the current plateau usually observed at high oxidation potentials. This approach allows to estimating the dipolar moment associated to the polymer/dopant complex.     

High-throughput approach to the catalytic combustion of diesel soot II: Screening of oxide-based catalysts

Following the development of a high-throughput (HT) methodology for the evaluation of diesel soot oxidation catalysts in a 16 parallel channels reactor, a library of over 60 catalysts was tested under optimized conditions. The catalyst compositions were chosen to include solids which specific properties like oxygen storage capacity, oxygen mobility and ionic conductivity. The key parameters for high activity appear related to the presence of active and mobile surface oxygen species, and to an appropriate catalyst particle size in order to favour the number of contacts with the soot. In contrast, high oxygen storage capacity and bulk oxygen ion mobility do not appear as relevant properties for high catalytic activity. Nine new formulations were found to perform better than the reference catalyst “high surface area (HSA) ceria” (Rhodia).     

Modeling of switching frequency instabilities in buck‐based DC–AC H‐bridge inverters

In this paper, the dynamical behavior of a full bridge DC–AC buck inverter controlled by fixed frequency and PWM is studied. After showing that the system can undergo both period‐doubling and Neimark–Sacker bifurcation at the fast scale (switching period) by using the exact switching model, an exact solution discrete‐time model able to predict both instability phenomena is derived. The model is obtained without making the quasi‐static approximation and it can be used to obtain the useful operation region in the multi‐dimensional design parameter space from time domain simulations in a very fast and accurate manner. Based on the study of the system, some design guidelines are provided. Copyright © 2010 John Wiley & Sons, Ltd.     

Double‐frequency buck converter as a candidate topology for integrated envelope elimination and restoration applications in power supply of RFPAs

This paper proposes the use of double‐frequency (DF) buck converter architecture consisting of a merged structure of high and low frequency buck cells as a candidate topology for envelope elimination and restoration (EER) applications and integrated power supply of RF power amplifiers (RFPA) to obtain favorable tradeoffs in terms of efficiency, switching ripple, bandwidth, and tracking capability. It is shown that having two degrees of freedom in designing the DF buck helps to achieve high efficiency, low output ripples, and tracking capability with low ripples, simultaneously. A comparison analysis is done with regards to the mentioned performance indexes with the standard and three‐level buck converters; in addition, the results are validated in HSPICE in BSIM3V3 0.35‐µm CMOS process. Copyright © 2015 John Wiley & Sons, Ltd.     

A rheometry method to assess the evaporation-induced mechanical strength development of polymer solutions used for membrane applications

Rotational and oscillatory shear rheometry were used to quantify the flow behavior under minimal and significant solvent evaporation conditions for polymer solutions used to fabricate isoporous asymmetric membranes by the self-assembly and non-solvent induced phase separation (SNIPS) method. Three different A-B-C triblock terpolymer chemistries of similar molar mass were evaluated: polyisoprene-b-polystyrene-b-poly(4-vinylpyridine) (ISV); polyisoprene-b-polystyrene-b-poly(N,N-dimethylacrylamide) (ISD); and polyisoprene-b-polystyrene-b-poly(tert-butyl methacrylate) (ISB). Solvent evaporation resulted in the formation of a viscoelastic film typical of asymmetric membranes. Solution viscosity and film viscoelasticity were strongly dependent on the chemical structure of the triblock terpolymer molecules. A hierarchical magnitude (ISV > ISB > ISD) was observed for both properties, with ISV solutions displaying the greatest solution viscosity, fastest film strength development, and greatest strength magnitude. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47038.