A fuzzy queue-aware routing approach for wireless mesh networks

Recent advances in Wireless Mesh Networks (WMNs) have overcome the drawbacks of traditional wired and ad-hoc networks and now they are seen as a means of allowing last mile communications with quality level assurance in Future Multimedia Systems. However, new routing schemes are needed to provide end-to-end Quality of Service (QoS) and Quality of Experience (QoE) support for delay/loss/jitter-sensitive multimedia applications. The well-known OLSR (Optimized Link State Routing) protocol with ETX (Expected Transmission Count) metric brings many benefits to the path selection process, but has a drawback with regard to queue availability management, which reduces the system performance. This problem is caused when OLSR-EXT control messages are exchanged and the queues of mesh routers along the end-to-end communication path are overloaded. As a result, multimedia-related packets will suffer from loss/delay/jitter and the overall system performance will decrease. This paper proposes the Optimized Link State Routing-Fuzzy ETX Queue (OLSR-FEQ) protocol to overcome the limitations of OLSR-ETX regarding queue availability, QoS and QoE assurance. OLSR-FEQ optimizes network and user-based parameters by coordinating queue availability, QoS and fuzzy issues in the routing decision process as a way of allocating the best paths for multimedia applications. Performance evaluations were carried out with the Network Simulator (NS-2.34) to show the benefits of the proposed solution when compared with existing routing schemes, namely OLSR-ETX, OLSR-FLC, OLSR-MD and HWMP (IEEE 802.11s standard), regarding QoS (unsuccessful packet delivery and throughput) and QoE (PSNR, SSIM, VQM and MOS) parameters.     

Evaluating the influence of multiplexing schemes and buffer implementation on perceived VoIP conversation quality

This work presents a study of RTP multiplexing schemes, which are compared with the normal use of RTP, in terms of experienced quality. Bandwidth saving, latency and packet loss for different options are studied, and some tests of Voice over IP (VoIP) traffic are carried out in order to compare the quality obtained using different implementations of the router buffer. Voice quality is calculated using ITU R-factor, which is a widely accepted quality estimator. The tests show the bandwidth savings of multiplexing, and also the importance of packet size for certain buffers, as latency and packet loss may be affected. The customer’s experience improvement is measured, showing that the use of multiplexing can be interesting in some scenarios, like an enterprise with different offices connected via the Internet. The system is also tested using different numbers of samples per packet, and the distribution of the flows into different tunnels is found to be an important factor in order to achieve an optimal perceived quality for each kind of buffer. Grouping all the flows into a single tunnel will not always be the best solution, as the increase of the number of flows does not improve bandwidth efficiency indefinitely. If the buffer penalizes big packets, it will be better to group the flows into a number of tunnels. The router processing capacity has to be taken into account too, as the limit of packets per second it can manage must not be exceeded. The obtained results show that multiplexing is a good way to improve customer’s experience of VoIP in scenarios where many RTP flows share the same path.     

Thermal evaluation of the use of porous ceramic plates on ventilated façades—part II: Thermal behavior

The effects of porous ceramic plates on the thermal behavior of ventilated façades were evaluated, and the results are presented herein. Thermal behavior in a ventilated façade of specimens containing 40 wt% of lime mud and a firing temperature of 1100°C was evaluated and compared with a commercial porcelain ceramic tile, which was the reference material. An experimental apparatus was designed to evaluate the thermal performance of the studied ventilated façades. The results revealed that the ventilated façade composed of the studied porous ceramic tiles produced a greater reduction in temperature between the external environmental and the interior of a box representing a building (ΔT5) of 65.7°C, compared with the façade composed of the commercial porcelain ceramic tiles (ΔT5 = 56.0°C) and even the traditional façade (ΔT5 = 49.1°C). Thus, porous ceramic tiles based on byproducts are promising candidates for ventilated façade systems.     

In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

Analytical ray tracing system: Introducing art, a C-library designed for seismic applications

Ray tracing technique is an important tool not only to forward but also for inverse problems in Geophysics, which most of the seismic processing steps depend on. However, implementing ray tracing codes can be very time consuming. This article presents a computer library to trace rays in 2.5D media composed by a stack of layers. The velocity profile inside each layer is such that the eikonal equation can be analytically solved. Therefore, the ray tracing within such profile is made fast and accurate. The great advantage of an analytical ray tracing library is the numerical precision of the quantities computed and the fast execution of the implemented codes. Even though ray tracing programs exist for a long time, for example the seis88 package by ?ervený, most of those programs use a numerical approach to compute the ray. Regardless of the fact that numerical methods can solve more general problems, the analytical ones could be part of a more sophisticated simulation process, where the ray tracing time is completely relevant. We demonstrate the feasibility of our codes using several examples (Miqueles et al., 2013)  [1]. The library can also be used for other applications besides seismic, e.g., optics and tomography.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Cholesterol synthesis and esterification in isolated enterocytes: Regulation by cholesterol and cholestyramine feeding

The purpose of the present study was to investigate the physiological control of the main regulatory enzymes of cholesterol metabolism in isolated enterocytes obtained from chick duodenum, jejunum and ileum. Cholesterol feeding resulted in an inhibition of 3-hydroxy-3-methylglutaryl-CoA reductase and mevalonate 5-pyrophosphate decarboxylase, while cholestyramine feeding increased reductase activity in all the regions studied and decarboxylase activity only in duodenum. Cholesterol feeding markedly increased acyl-CoA:cholesterol acyltransferase, but the effects of cholestyramine were less clear. The effects on transferase activity cannot be due to differences in the availability of acyl-CoA as exogenous substrate as no significant differences were found in acyl-CoA hydrolase activity after any of the dietary treatments. The effects of cholesterol feeding were related to changes in the cholesterol content of epithelial cells, whereas in the case of cholestyramine this relationship was less apparent.     

Molecular dynamics studies of a model polymer-catalyst-carbon interface

Classical molecular dynamics simulations are performed to obtain insights into structural and dynamical behavior of water and O₂ transport through a model polymer membrane, and at the interface of such hydrated polymer with graphite-supported nanocatalyst platinum particles. Water clustering is observed near the membrane hydrophilic sites constituted by sulfonic groups, which due to their affinity with platinum, are located near the metallic surface. It is found that the diffusion of water through the model hydrated polymer membrane depends strongly on the level of membrane hydration due to contribution from various mechanisms whose relative weights change with the degree of hydration. Possible scenarios for O₂ diffusion are also analyzed.     

Al ionic radius influence on molecular dynamics simulations ofγ-Al2O3

Molecular dynamics (MD) simulations of-Al₂O₃, using a pairwise additive interaction potential of Pauling's type with four different radii for aluminum atoms, were analysed in order to determine the influence of the radius on the modification of coordination numbers of A1 relative to the ideal structure, at two different temperatures of 300 and 1500 K. It is found that the best choice is the radius of penta-coordinated aluminum, reproducing structural and vibrational properties of the compound in excellent agreement with experimentally observed properties.     

Enhanced properties of innovative laponite‐filled waterborne acrylic resin dispersions

In view of the possible future applications of waterborne automotive coatings, acrylic‐based nanocomposite dispersions were investigated by the simple mixing of aqueous laponite nanoparticle dispersions with acrylic resin dispersions. The mechanical, flow, and leveling properties of waterborne nanocomposite dispersion formulations containing increasing concentrations of silicate and nonvolatile components (nvc) in the acrylic dispersions were investigated. The results obtained were related to the morphological information obtained from transmission electron microscopy and wide‐angle X‐ray scattering measurements in liquid suspension or on the cured films. At low synthetic silicate loading when flow, leveling, and appearance properties were still acceptable for processing and application, a large increase in the modulus of the cured coating films was observed, which was a result of the special morphology of the laponite‐rich regions of the cured film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 687–697, 2007