XPS Characterization of reduced LaCoO3 perovskite

Three samples of LaCoO₃ were prepared by two different methods and calcined at 800 or 1000 °C. They had BET areas of 1, 12, and 16 m²/g and all of them showed pure perovskite X-ray diffraction patterns with identical unit cell dimensions. In a series of experiments the oxide, having larger surface area, was stepwise reduced in hydrogen at temperatures between 60 and 500 °C. The XPS spectra, taken at room temperature after evacuation at 400 °C at each reduction level, showed that the surface concentration of Co° was very low up to 300 °C but increased sharply between 300 and 350 °C (9–75%). This concentration further increased to 100% after 10 min reduction at 450 °C, but upon heating in hydrogen for an additional 10 min at 500 °C it decreased again to 75%. In another series of experiments the mixed oxide was reoxidized after each reduction. A fresh sample was reduced to 350 and 400 °C by contacting with hydrogen for 1 hr and evacuated at temperatures between 400 and 500 °C. Both high evacuation temperatures and reduction at 400 °C during 1 hr produced a sharp decrease in Co° surface concentration. These results are consistent with the catalytic behavior of this perovskite reported earlier by E. A. Lombardo et al. (4–7). A model is proposed to interpret the reduction of LaCoO₃.     

Investigation of the properties of niobium pentoxide for use in dye-sensitized solar cells

This work demonstrates the obtention of Nb₂O₅ nanoparticles by the microwave-assisted hydrothermal synthesis method in a fast way and with the use of low temperatures. The heat treatment applied on the samples promotes the phase change in Nb₂O₅ from pseudohexagonal to orthorhombic as the temperature increases, with a particle size between 7.3 and 32.6 nm. The band gap of the samples decreases with increasing temperature, obtaining a minimum value of 3.04 eV at 800°C. Dye-sensitized solar cells (DSSC) were assembled using the Doctor Blade coating technique. The photovoltaic parameters of open-circuit voltage (Voc) and short-circuit current density (Jsc) were evaluated. The cells showed a photovoltaic response, demonstrating that Nb₂O₅ has a semiconductive potential. The DSSC have different characteristics regarding Jsc and Voc, showing that according to the temperature increase in the semiconductor sample, there is a decrease in the photovoltaic parameters of the cells.     

Combining 1,3-Ditriazolylbenzene and Quinoline to Discover a New G-Quadruplex-Interactive Small Molecule Active against Cancer Stem-Like Cells

Quadruplex nucleic acids are promising targets for cancer therapy. In this study we used a fragment-based approach to create new flexible G-quadruplex (G4) DNA-interactive small molecules with good calculated oral drug-like properties, based on quinoline and triazole heterocycles. G4 melting temperature and polymerase chain reaction (PCR)-stop assays showed that two of these compounds are selective G4 ligands, as they were able to induce and stabilize G4s in a dose- and DNA sequence-dependent manner. Molecular docking studies have suggested plausible quadruplex binding to both the G-quartet and groove, with the quinoline module playing the major role. Compounds were screened for cytotoxicity against four cancer cell lines, where 4,4′-(4,4′-(1,3-phenylene)bis(1H-1,2,3-triazole-4,1-diyl))bis(1-methylquinolin-1-ium) ( 1 d ) showed the greater activity. Importantly, dose–response curves show that 1 d is cytotoxic in the human colon cancer HT-29 cell line enriched in cancer stem-like cells, a subpopulation of cells implicated in chemoresistance. Overall, this study identified a new small molecule as a promising lead for the development of drugs targeting G4 in cancer stem cells.     

Synthesis and characterization of cellulose acetate from royal palm tree agroindustrial waste

This study provides a novel value‐added utilization of the agroindustrial waste of royal palm tree leaf sheath to produce cellulose acetate. One of the motivations of this work was the fact that Brazil is one of the largest heart of palm producers in the world. However, as a result of extraction and processing, tons of waste are generated and discharged to the environment. Such waste is rich in lignocellulosic material, which could be reused to obtain derivatives of interest and commercial value. The synthesis of cellulose acetate was performed through a homogeneous acetylation reaction. Three different conditions were tested for delignification of the raw material, which resulted in a reduction in lignin content from 17.75 to 7.72%. The highest yield of cellulose acetate reached 99.5%, with degree of substitutions ranging between 2.08 and 2.82, which indicates satisfactory conversion. The Fourier transform infrared spectrum showed that practically all hydroxyl groups were replaced by acetate groups; this was also confirmed by nuclear magnetic resonance analysis. X‐ray diffraction analysis showed that the cellulose acetate crystallinity index was 8.9%. This demonstrates the viable potential of cellulose acetate production with low cost and use of highly available agroindustrial waste. POLYM. ENG. SCI., 59:891–898, 2019. © 2018 Society of Plastics Engineers     

Eumelanin for nature‐inspired UV‐absorption enhancement of plastics

In the human body, the black‐brown biopigment eumelanin blocks harmful ultraviolet (UV) radiation. In the plastics industry, additives are often added to polymers to increase their UV‐absorption properties. We herein report an assessment of the biopigment eumelanin as a nature‐inspired additive for plastics to enhance their UV absorption. Since eumelanin is produced by natural sources and is nontoxic, it is an interesting candidate in the field of sustainable plastic additives. In this work, the eumelanin‐containing films of commercial ethylene–vinyl acetate copolymer, a plastic used for packaging applications, were obtained by melt compounding and compression molding. The biopigment dispersion in the films was improved by means of the melanin free acid treatment. It was observed that eumelanin amounts as low as 0.8 wt% caused an increase of the UV absorption, up to one order of magnitude in the UVA range. We also evaluated the effect of eumelanin on the thermal stability and photostability of the films: the biopigment proved to be double‐edged, working both as UV‐absorption enhancer and photo‐prooxidant, as thermogravimetric analysis and infrared spectroscopy revealed. © 2019 Society of Chemical Industry     

Chitosan impregnated gutta-percha points: antimicrobial in vitro evaluation and mechanical properties

Chitosan-impregnated gutta-percha points (ChitGPP) were tested for their ability to inhibit the growth of microorganisms usually involved in root canal infections. Their mechanical properties were also studied and compared with the commonly used commercial points in endodontics. ChitGPP were more efficient in reducing the microbial load than those without chitosan. ChitGPP also possess better tensile and elastic properties than commercial ones. After six months of storage, ChitGPP’s were still able to reduce the bacterial load by 1 log, suggesting that impregnation of gutta-percha points with chitosan could be a good alternative to obtain gutta-percha points with improved antimicrobial properties.     

Photo-fenton and UV photo degradation of naphthalene with zero- and two-valent iron in the presence of persulfate

An initial set of 12 kinetic experiments was carried out to remove naphthalene from an aqueous effluent by photo-Fenton involving Fe⁰ and Fe²⁺ at two different concentrations of H₂O₂ (150 and 300?mg?L^?1) and three different pHs (3, 5, and 7) (2²×3¹ experiments). The rate constants (k) for the reaction of naphthalene degradation by involving Fe²⁺ as reactant were in general higher than those with Fe⁰, but the use of Fe²⁺ increased the concentration of naphthalene at equilibrium (C_e) when compared with the same response obtained with Fe⁰ at analogous conditions. A second set of twelve kinetic experiments of photo-Fenton degradation was also performed with persulfate as additive at the conditions already reported, but at a constant concentration of H₂O₂ of 150?mg?L^?1 (2¹×3¹ experiments with NaCl +2¹×3¹ experiments without NaCl). In almost all the runs in which only the source of iron was varied, k from the kinetic data involving Fe²⁺ was higher than that involving Fe⁰, but no difference was observed in terms of C_e that was always zero. The addition of persulfate to treat the effluent either containing or not containing salt enhanced the chemical kinetics, and shifted the equilibrium toward the full removal of naphthalene. A final set of nine experiments of UV photo degradation of naphthalene by involving persulfate without iron, with Fe⁰ and Fe²⁺ in the pH range from 3 to 7 (3² experiments) mainly showed that the use of H₂O₂ may be avoided to remove rapidly and completely naphthalene from wastewater.     

Click chemistry for rapid labeling and ligation of RNA

The copper(I)-promoted azide-alkyne cycloaddition reaction (click chemistry) is shown to be compatible with RNA (with free 2'-hydroxyl groups) in spite of the intrinsic lability of RNA. RNA degradation is minimized through stabilization of the Cu(I) in aqueous buffer with acetonitrile as cosolvent and no other ligand; this suggests the general possibility of "ligandless" click chemistry. With the viability of click chemistry validated on synthetic RNA bearing "click"-reactive alkynes, the scope of the reaction is extended to in-vitro-transcribed or, indeed, any RNA, as a click-reactive azide is incorporated enzymatically. Once clickable groups are installed on RNA, they can be rapidly click labeled or conjugated together in click ligations, which may be either templated or nontemplated. In click ligations the resultant unnatural triazole-linked RNA backbone is not detrimental to RNA function, thus suggesting a broad applicability of click chemistry in RNA biological studies.     

Effect of Eu-implantation and annealing on the GaN quantum dots excitonic recombination

Undoped self-assembled GaN quantum dots (QD) stacked in superlattices (SL) with AlN spacer layers were submitted to thermal annealing treatments. Changes in the balance between the quantum confinement, strain state of the stacked heterostructures and quantum confined Stark effect lead to the observation of GaN QD excitonic recombination above and below the bulk GaN bandgap. In Eu-implanted SL structures, the GaN QD recombination was found to be dependent on the implantation fluence. For samples implanted with high fluence, a broad emission band at 2.7 eV was tentatively assigned to the emission of large blurred GaN QD present in the damage region of the implanted SL. This emission band is absent in the SL structures implanted with lower fluence and hence lower defect level. In both cases, high energy emission bands at approx. 3.9 eV suggest the presence of smaller dots for which the photoluminescence intensity was seen to be constant with increasing temperatures. Despite the fact that different deexcitation processes occur in undoped and Eu-implanted SL structures, the excitation population mechanisms were seen to be sample-independent. Two main absorption bands with maxima at approx. 4.1 and 4.7 to 4.9 eV are responsible for the population of the optically active centres in the SL samples.